Liczymy pasujące modele…
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
This is a free model, if you want to compensate my work feel free to use my referral codes for meta quest games): You'll receive 25% off and I will receive up to 5$: https://quest-referrals.silvio.cloud/ ---------------- This is an…
First of all i want to thank the original creator for an awesome design its way better than using the generic adapters. So i noticed i was having problems when i have the face plate in the smallest position. I had to slide it all the way…
A first design for an adapter form the Quest 3 Strap to the Quest 2 Strap with space to allow the BOBOVR to attach. NOTE — These have only been tested with the BOBOVR M1 (what I use). Because of the extra distance from the headset other…
Printed at 0.2 resolution, 15% infill Fits K1c plate.
This part lets you convert your BoboVR M2 for Quest2 to fit on Quest3. Print with PETG 0.15 mm layer height and 100% infill.
I remixed a remix Changes from original - Hole moved to middle (More wiggle room can bring closer to face) - Hole raised up closer to the edge (Left and right side are now provided). Increases distance between Q3 arm and the BOBO band -…
As I wanted a cleaner alternative to the other Q2 to Q3 Adapters I remixed this Adapter to Fit BoboVR M1/M2 Headtstrap for Quest 3 like the Original BoboVR M1 Retrofit Kit for Quest 2. Printed in PLA 0.2 Layer 100% Infill Printed on Flat…
It's asymmetrical, so you'll have to flip the model in your slicer to print both halves. To install, remove the arms of the Vision Pro with a sim eject tool or paperclip and slide it on. The eject hole is covered by the light shield.…
Keep the USB port strain free with this Link cable clamp for BOBOVR head strap Print with 40% infill.
For FDM printers please consider your oritentation. Place the model vertically helps you to prevent layer separation between the brackets and the body. Allows you to use the M2 plus with vision pro Allows you use without light seal This…
Both sides are included and orientated correctly. Just print at any resolution in any material you want. Please let me know if you need any help or have any suggestions. I did not like any of the existing adapters, so I created this. It…
Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…
See 3MF file for build orientation. Only tested in PLA+ Print everything solid, except for P1 (koss mount). No supports required. Press fit P2 (slider) into P1 (koss mount). After disassembly of the Porta Pros, superglue P1 (koss mount)…
After trying a few different prints, the one from https://www.printables.com/model/615431-bobovr-m2-to-meta-quest-3-mod/files was the best snug fit, others loosened with time. However, the round insert snapped on this both of my prints…
This is a remix of fortinmike's remix to allow the headphones to mount the BoboVR M2 and M2 Pro halo straps. Unlike other designs, this headphone mount attaches to the headset by replacing the centre circular cap at the pivot point of the…
Its just a Remix from this https://www.thingiverse.com/thing:4631187?part=001cc735-c1a3-4abe-9acf-0a9c7e4e7ea0 for the Quest 2 Bobovr M1 Plus Headstrap.
This Model lets you mount a BOBOVR B2 Battery securely to a Pico4 headset similar to what the BOBOVR M2 PRO head strap does. I used broken one of these as a donor so I included the possibility for adding a PCB with pogo pins in the base.…
Description Anyone who owns a Meta Quest 3 knows this trick: cupping your hands slightly behind your ears instantly improves the sound. These audio enhancers are designed to recreate that effect — permanently and hands-free. The clip-ons…
Allows you to connect a Bobo VR M2 headstrap to the Quest 3/3S. I printed it at a 45 degree angle standing up on the bed with tree supports, so there is no major cleanup required.
Beefier version of Part, Insert v2.stl. It fits very snugly now and is much sturdier. I also recommend printing them at 45 degrees, this will make layer adhesion MUCH better. I was able to put 30 pounds of force to push these in and they…
A thicker, more rigid version of JuliusTek's "Quest 3 to Quest 2 Strap Addapter for BOBOVR". Just use one zip tie per arm as shown in the images to affix it to the Quest 3's arm. For printing, I used Cura's tree supports, setting it to…
Modified the excellent design introduced by @ SeeJingQi_1472693 for more adaptability and cable management. Moreso. I had a lot of cable to ziptie and wanted somewhere to bundle it. Print 15%, 4wall, with the back down flat against the…
It requires supports, I just used auto generating tree supports.
Be careful with the support material, as blocking the slits will make it painful after printing. I used paint-on supports to support the 2 ends of the thing and the very edge and blocked support near the actual slit so that it wouldn't be…
Properly converting the BoboVR M2/M3 to the Apple Vision Pro. This print will allow you to convert a BoboVR M2 or M3 halo style head strap to fit the Apple Vision Pro. Unlike other conversion efforts that adapt the existing Meta Quest…
I liked bondematt's design with the vents, but also furryWallpaper's idea with the neodym magnets, so I enlarged the holes for 5x3 mm neodym magnets. Also, I enlarged the space in the middle to create more clearance for the head strap.…
I created a new clip with parameters that suit the Bobovr M2 pro and the excellent Koss adapter Sturdy Meta Quest 3 and Quest 2 Headphone Mount by Michaël Fortin | Download free STL model | Printables.com
Power bank clip is designed for Oculus Quest 2 and AlzaPower Carbon 10.000mAh Fast Charge + PD3.0 White . Select your head strap version: Original Oculus head strap - clip_original_head_strap.stl BOBOVR M2 Head Strap - clip_bobovr_m2.stl…
Quest 3 adaptor for a cheapo Bobovr M2 clone halo headstrap
You need to insert 4 washers while printing for the magnets to adhere to. For this stop the print at 3,4mm and insert them in the holes. I used washers that were 15mm in diameter, 1,15mm thick and screws with a head diameter of 9,5mm. If…
Remixed these to fit the Deluxe audio strap headphones to the BOBOVR M2 Strap. It works great, I routed the joining cable behind the rear head pad and held it in place with a velcro tie. Very simple install, just remove the DAS headphones…
I 3D-scanned the original battery from the BoboVR S3 Pro (battery model B100) to make a magnetic placeholder to protects the connection pins and look cool. Here are 3 models: Slim cover with Meta logo Slim cover without Meta logo Original…
Updated 10/27/24: Low Profile design now uploaded. The old style basket did not allow you to put it into a case. This lower profile model should fit into most cases. I really like the design set out by @ SeeJingQi_1472693 and wanted to do…
Definitely not as clean as the original but I didn't want to cut a new pair of headphones. The headset fits in very nicely. Printed in PETG.
A quick remix that works.
I tried different sound mods but none worked well for me so i made a 360° Rotating Base for this one Quest 3 Koss Headphone Mount (with Elite Strap) by AlFlo3D - MakerWorld . The Base replaces a cover one the S3 Pro. Unscrew the Cover…
Following the great work by FortinMike in modifying the original Koss PortaPro/KCS75 Adapters for the Oculus Quest https://www.thingiverse.com/thing:4822413 and the remix by Thorlian https://www.thingiverse.com/thing:5222313 I have…
I created a Battery mount for BoboVR M2/M3. This is a remix of 2 projects: https://www.thingiverse.com/thing:4903693 and https://www.thingiverse.com/thing:5269997 . It is suitable for hosting a Charmast or Anker 10000 mha power bank…
Lowered the connector so it can reach further down and cover my ears better. I uploaded the fusion file for remix because it sucks converting from stl. I printed in PETG at 15% with tree supports. A couple parts are not easy to remove but…
Overview: This is a remix of sekazi's BOBOVR M2 Pro Hinge Lock for Quest 2 , MMImodular's AIAIAI Hummingbird mount and MMImodular's Picoamp case . This is a over the ear headphone mount for Quest 3's BOBOVR M3 Pro strap, it should work on…
Clip on adapter for attaching a Tundra Tracker to the head strap of a BoboVR M3. I recommend printing it on the short side. It's attached using the clips, the bottom clips go on both sides of the little strap thing.
Broke my headstrap pivot and I couldn't find another for sale. This works great. I suggest printing with PETG and turning your temperature up about 10 degrees to ensure better layer adhesion. Be careful placing the part as too much force…
A tracker mount for the Quest 3 BoboVR M3 headstrap. You can use superglue to attach the bolt to the printed piece and 3M tape for attaching it to the headstrap! You'll need this bolt: https://boltdepot.com/Product-Details?product=16061
Not the prettiest but functional. I like the neatness from the model by LXNESAMURAI and the functionality of DAS flip mechanism and model by DarkZed1, so I went into Blender and buid something simple. I have prototyped a few versions,…
This replaces the BOBOVR Battery Dock and allows you to use an external power bank in its place while retaining the “hot swap” capabilities. I went with the Anker PowerCore 10K Pro. The magnet holes in this remix are reduced to exactly…
One can use the model as a connector cover when the battery is not in use. But it's more meant to be remixed with other ideas. Use it and share your work!
When I first got my Quest 2 a week ago, I printed so many accessories for it in advance. When I got myself the Bobovr M1 Pro, a lot of the accessories I printed didn't fit the strap. After some trial and error, I was able to come up with…
I used printing order Outer/Inner and scaled it to 0.99 to get to fit. And make sure to set Top Z and bottom Z to 0,25-0.3 in advanced supports settings so the supports wont make any trouble.
I printed it in PLA, simply glue the two parts together (e.g. UHU Special adhesive hard plastic). The connection between the adapter and the headstrap is very tight. Pay attention to where you place the seam. (if the seam is inside the…
Stuff you will need: Two M3x4 (@5mm) Heat Inserts (Goes into the holders) Two M3x6mm screws (Secures holders to the L-Ears) M3x8mm works too. (Optional) Two M3x20mm Screws (Optional) Two M3 Nuts How to Print it: The L-Ears can be printed…
This mod to the BOBOVR M2/M3 Pro/Mini Head Strap replaces the stock battery mount for an INUI B61 battery . The stock BOBOVR battery is unable to sustain the charge level of the Quest 3, while other USB-PD batteries can. The design was…
wall mount for BOBOVR battery charger. b2 charger version ( quest 2 / quest 3 / pico 4 ) for use on multiboard mounting solutions, using multiconnect attachment system- created using the generator provided in underware2.0. personally, I…
This a remix of two models I made. Now the controllers and batteries are all together. The third battery holder on the top was printed separately and then glued to the model. The model fits under the headstrap.
I merged two models together that cradles the B2 batteries, but I left in the mounts for the battery pack since I wanted to use the strap/zip tie parts for cable management options. Supports are REQUIRED for this print.
BoboVR XL Long Koss Headphone Adapters
This model is a remix of ZincLeadAloy_1332620 ‘s model of “ BoboVR XL Long Koss Headphone Adapters (Chonki) ”. This model allows the same extension of the headphones but also includes the standard ’needle nose plyer' like mount that the “…
Basta con 2 capas y 10% de relleno en PETG.
I recently purchased the new 2026 BOBOVR M3 strap as an upgrade from a no-name elite strap. This new one is 90% as secure as the elite strap, but way, way more comfortable. Link to headstrap: https://www.bobovr.com/products/m3 I went for…
I recently upgraded my Quest 3 Headband from an elite style strap to the recently released (2026) BOBO VR M3 which I now love. Link to headset: https://www.bobovr.com/products/m3 For my previous strap, I simply cut a notch in the band so…
The original design works fine, but it had too much side wobble, on my head at least. But since I really like the simplicity of this design over some other more complex and heavier structures I found, I had a similar simple approach to…
This is a mount that allows attaching the BOBOVR battery dock to the HTC Vive Deluxe Audio Strap. It was tested with the mount for B2 batteries, but the B2 dock and the B100 dock should have the same physical interface to the headset…
Description Anyone who owns a Meta Quest 3 knows this trick: cupping your hands slightly behind your ears instantly improves the sound. These audio enhancers are designed to recreate that effect — permanently and hands-free. The clip-ons…
Broke my headstrap pivot and I couldn't find another for sale. This works great. I suggest printing with PETG and turning your temperature up about 10 degrees to ensure better layer adhesion. Be careful placing the part as too much force…
I remixed a remix Changes from original - Hole moved to middle (More wiggle room can bring closer to face) - Hole raised up closer to the edge (Left and right side are now provided). Increases distance between Q3 arm and the BOBO band -…
I created a new clip with parameters that suit the Bobovr M2 pro and the excellent Koss adapter Sturdy Meta Quest 3 and Quest 2 Headphone Mount by Michaël Fortin | Download free STL model | Printables.com
It's asymmetrical, so you'll have to flip the model in your slicer to print both halves. To install, remove the arms of the Vision Pro with a sim eject tool or paperclip and slide it on. The eject hole is covered by the light shield.…
Allows you to connect a Bobo VR M2 headstrap to the Quest 3/3S. I printed it at a 45 degree angle standing up on the bed with tree supports, so there is no major cleanup required.
These simple models clip onto the BOBOVR M2/M3 Pro/Mini Head Strap to guide cables along the headset. Two versions are included: 5mm hook only: intended for any battery charging cables. 5mm hook + 8mm hook: intended for any battery…
So, my friend has a Quest 3 VR headset. He bought the BoboVR S3 Pro upgrade kit for it. The strap on this device turned out to be quite unreliable and broke quickly. We created a model and printed it using PA12. Just in case, we sanded it…
Wanted to mount my batteries to my multiboard. One model exists, but I wanted something a bit more slim. This uses two multiconnect mounts on the rear. I recommend mounting one high and another low to lock the unit more securely to the…
strap for BOBOVR VR head strap which replaces the black side strap. Fits on M2 Pro only, not for M2, not for other vers.
Can be Used to Mount additional Hardware easily to your Headset. The Base has a Diameter of 28mm. You need a M2 Heat-set Insert and a M2x4 Screw to mount it to the Headset. Lift the Velcro pad up near the edges to reveal the Philips Screw.
A wall mount for the BD3 charging dock from BOBOVR! Note that this model is meant to work with the dock WITHOUT its anti-slip pad! It's a slight pressure fit that keeps it secure, so don't worry if you need to push a little! Includes side…
Introduction This accessory is designed for the BOBOVR S3 Pro headset strap to support the charging cable for the Quest 3. Its minimalist design prevents the charging port from damage caused by external force or movement during use. Its…
I liked the simple snap-in design rather than using magnets, and didn't want to tape or strap in the battery. I've also included the separated mount that I used from MrTB's mount so you can more easily fuse it with other existing battery…
Wenn deine Rübe zu groß ist und der Klettverschluss der BoboVR nicht lang genug, um ihn durch die Lasche an der Quest 3 zu ziehen, kannst du diese einfache Verlängerung nutzen. Zumindest PETG ist zäh genug, um den Zug auszuhalten. Mit…
Крепление провода для шлема Oculus Quest 2 (с креплением BoboVR)
This is BOBOVR M2 Head Strap (without battery pack) Headphone Adapter For Sony MDR-ZX110. You can find here two version L and XL (for larger heads). Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 25% Filament: PM PETG or…
This is angled at 10 degrees. if anyone wants a different angle, don't heistate to message me Just mirror the model to get the other side
This is a replacement for the BOBOVR M2 strap that seems to broke very often like in my case. It is slightly thicker than the original to ensure greater strength. I made two versions, one with the screw guide like the original and one…
This replaces the BOBOVR battery dock and allows you to use an external power bank in its place while retaining the “hot swap” capabilities. I went with the INUI BI-B61. If you don't have a compatible headstrap for the full replacement…
A fully fitted replacement battery dock for the BOBOVR M3 (and other similar straps that uses the same battery dock) with a backing for velcro strapping any decently sized / weighted powerbank. Apart from being able to strap any powerbank…
A magnetic battery mount for the BoboVR thats been remixed to mount an INIU Bi-B61 without needed velcro straps. for those with headstraps that can't use my replacement dock . Original modeler used 2 9x2 magnets per hole.
This is a combination of two existing BoboVR mounts. Inspired by BoboVR M2 PRO Custom Battery Mount from MrTB and BoboVR Battery Dock Replacement from Shrimpy Printed in PLA 0.2 mm 18% infill Supports: no
This is a very simple wall mount for the BoboVR magnetic battery. There are 2 spots where you can optionally superglue (2) 8x3mm magnets so that the battery sits perfectly in place. The PLA will flex a little bit with the battery inside…
The batteries that come with the M2/M3 BoboVR straps can't charge the Meta Quest 3 faster than the Quest discharges, so what you need are higher power rating batteries. I found these rather cheap INIU 22.5W power banks, which are enough…
An unnecessary accessory for your BoBoVR charging station. Here printed in yellow to easily distinguish from the BoBoVR parts (I'm going to print in white). The design is by no means perfect. It holds the batteries in place in a slight…
This is a remix using this holder for an anker 533 https://www.thingiverse.com/thing:6296987/remixes
I use my Quest 3 without the facial interface when doing intensive fitness games. The problem is the BoboVR M3 hinge is too soft and the headset keep falling onto my nose. With these little blockers, I can bob my head in my games without…
BOBOVR M2 strap replacement parts "Modified to 1.28mm"
