BoboVR Battery Dock Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model replaces the battery dock of the BoboVR head strap for the Meta Quest
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 1079
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This replaces the BOBOVR battery dock and allows you to use an external power bank in its place while retaining the “hot swap” capabilities. I went with the INUI BI-B61.
If you don't have a compatible headstrap for the full replacement check out this option.
Materials Needed
- 10x3mm Neodymium Magnets x8
- 1-1.5ft USB C cable (preferably right angle for quest side)
- INUI B1-B61 (or another power bank but model is designed for this one)
Print in orientation shown in pictures. Model in pictures printed in eSun PLA+. Magnets were press fit without the need for glue and holes have a tolerance of 0.1mm.
Print parameters:
0.2mm layer height
3 walls
10% infill (I used gyroid)
Supports needed