BoboVR M1 Pro Adapter (Quest 2 to Quest 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thicker version of JuliusTek's "Quest 3 to Quest 2 Strap Addapter for BOBOVR".
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A thicker, more rigid version of JuliusTek's "Quest 3 to Quest 2 Strap Addapter for BOBOVR". Just use one zip tie per arm as shown in the images to affix it to the Quest 3's arm.
For printing, I used Cura's tree supports, setting it to “everywhere” for easier to tear away supports, although it still took me upwards of 30 minutes to remove pretty much all the supports on both arms.
If the part that's supposed to hug the Quest 3's arm rips like it did for me, you may use a combination of cotton and superglue to create a lightweight cement to patch the tear. They are slightly visible on my images (top of the arms). Make sure to wait for the glue and cotton to completely dry before affixing it to the Quest 3's arm. You may spray the cotton/glue mixture with rubbing alcohol to accelerate the drying process.