1 / 6
BOBOVR M3 / M3 Pro+ battery mount (2026 ver.) for Quest 3 — zdjęcie 1
1 / 6

BOBOVR M3 / M3 Pro+ battery mount (2026 ver.) for Quest 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Securely mount your own batteries to the latest BOBOVR M3 head strap for Quest 3.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I recently purchased the new 2026 BOBOVR M3 strap as an upgrade from a no-name elite strap. This new one is 90% as secure as the elite strap, but way, way more comfortable.

Link to headstrap:
https://www.bobovr.com/products/m3

I went for the regular, non Pro+ option as I already had 10,000mAh Anker 533 power banks which have worked well for me.

I started thinking this may be a great universal barttery platform for the Quest3, so I'm adding models for others which work well to charge the headset.

Current Batteries supported:

  • Anker 533 10,000mAh

  • INUI BI-B5 20,000mAh

If there is a battery you would like to support please let me know and I can create some variations. I can mount above or behind in the mounting slot as you wish depending on the length of your USB C cable.

Or you can take a crack at your own remix from my publicly available OnShape model:
https://cad.onshape.com/documents/941233398851162658821b85/w/c5e20af666ebcad1ff23c221/e/25f41d0516baf4c19faeeb4e

It's incredibly secure, no wobble and helps offset the front-heavy Quest 3. There are recesses to add in 2x magnets (10mm diameter, 1.6mm depth). There are also 3 pins which snuggly clip into place. The picture of me holding it up by the mount is without magnets, but I have magnets installed now and they certainly add some extra security.

I have created 2 versions, one where the battery is up top and forward (my double right-angle usb-c cable is only 25cm so this worked best for me) and the more conventional (probably better for most) rear mount option).

Printing notes:

  • Printed in cheapo PLA on a Bambu P1S.

  • Best printed on its side flat to the bed.

  • Brim or mouse ears are helpful if your bed adhesion is as bad as mine.

There are solid and geometric battery caddy options. I think solid is better due to the tedious support removal process and rough finish they left behind.

This is the first time I've designed anything from scratch and I hope you enjoy!

I also remixed the headphone mounts for Sennheiser HD25 which you can find here:

Tagi