BOBOVR M3 / M3 Pro+ battery mount (2026 ver.) for Quest 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Securely mount your own batteries to the latest BOBOVR M3 head strap for Quest 3.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Share Alike
I recently purchased the new 2026 BOBOVR M3 strap as an upgrade from a no-name elite strap. This new one is 90% as secure as the elite strap, but way, way more comfortable.
Link to headstrap:
https://www.bobovr.com/products/m3
I went for the regular, non Pro+ option as I already had 10,000mAh Anker 533 power banks which have worked well for me.
I started thinking this may be a great universal barttery platform for the Quest3, so I'm adding models for others which work well to charge the headset.
Current Batteries supported:
Anker 533 10,000mAh
INUI BI-B5 20,000mAh
If there is a battery you would like to support please let me know and I can create some variations. I can mount above or behind in the mounting slot as you wish depending on the length of your USB C cable.
Or you can take a crack at your own remix from my publicly available OnShape model:
https://cad.onshape.com/documents/941233398851162658821b85/w/c5e20af666ebcad1ff23c221/e/25f41d0516baf4c19faeeb4e
It's incredibly secure, no wobble and helps offset the front-heavy Quest 3. There are recesses to add in 2x magnets (10mm diameter, 1.6mm depth). There are also 3 pins which snuggly clip into place. The picture of me holding it up by the mount is without magnets, but I have magnets installed now and they certainly add some extra security.
I have created 2 versions, one where the battery is up top and forward (my double right-angle usb-c cable is only 25cm so this worked best for me) and the more conventional (probably better for most) rear mount option).
Printing notes:
Printed in cheapo PLA on a Bambu P1S.
Best printed on its side flat to the bed.
Brim or mouse ears are helpful if your bed adhesion is as bad as mine.
There are solid and geometric battery caddy options. I think solid is better due to the tedious support removal process and rough finish they left behind.
This is the first time I've designed anything from scratch and I hope you enjoy!
I also remixed the headphone mounts for Sennheiser HD25 which you can find here: