1 / 1
Adapter for BOBOVR battery dock on HTC Vive Deluxe Audio Strap — zdjęcie 1

Adapter for BOBOVR battery dock on HTC Vive Deluxe Audio Strap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter that allows attaching the magnetic BOBOVR battery dock to a Vive Deluxe Audio Strap (DAS).

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a mount that allows attaching the BOBOVR battery dock to the HTC Vive Deluxe Audio Strap. It was tested with the mount for B2 batteries, but the B2 dock and the B100 dock should have the same physical interface to the headset because they were both sold as compatible with the M1 head strap.

This fits over the edge of the lower plastic strap on the back of the DAS and is held in place with zip ties or something fed between the velcro under the padding. If you print with supports on, you might want to put a support blocker on the zip tie channels because it can be difficult to remove small supports from inside there. I used an old wire cable twist tie to floss the supports out.

The battery dock mounts backwards. You will need to push the screws out of their holes, turn the dock around and put them back in the other way around.

I printed vertically in PETG with supports.

Tagi