Vive DAS hinge adaptor for Bobovr Straps.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not the prettiest, just functional.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
Not the prettiest but functional. I like the neatness from the model by LXNESAMURAI and the functionality of DAS flip mechanism and model by DarkZed1, so I went into Blender and buid something simple.
I have prototyped a few versions, this one should give enough accommondation for the ear cups for different head sizes.
These adaptors can be easily mounted with the original screws from BoboVR hinge and DAS; the screw hole to be mounted on the Bobovr S3 hinge is smoothbore 2mm in diameter, M2.5 screw should be fine.
I highly recommend just by a Koss KSC75 can replace the drivers in DAS headphone following the post: https://www.reddit.com/r/virtualreality/comments/ki4rz6/tutorial_replacing_speakersdrivers_in_the_deluxe/. With some basic soldering (also, shorten the wries), this will be the ultimate audio solution for Quest 3.
PLA, 25% cubic infill, lay the model flat either way. Copy the model and mirror flip for the right ear.