Honeycomb retrofit inserts for Ikea skadis dropper bottle holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A honeycomb nub that presses in tightly to the skadis holes on the dropper bottle holders made by "TheRooster".
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to make the skadis dropper bottle holder by “TheRooster” retrofitted to the honeycomb storage system. These just press in to the original model's holes instead of the original skadis hook design. They should fit tightly. I used pliers to press them. Print one to see how it fits and if you need to scale it based on your printer's settings. There is a left and right that need to be oriented correctly to fit in the honeycomb storage system. Orientation is while looking from the back.
The files for the skadis dropper bottle holders can be found in TheRooster's original post in the model origin below.