Honeycomb retrofit inserts for Ikea skadis dropper bottle holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A honeycomb nub that presses in tightly to the skadis holes on the dropper bottle holders made by "TheRooster".
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to make the skadis dropper bottle holder by “TheRooster” retrofitted to the honeycomb storage system. These just press in to the original model's holes instead of the original skadis hook design. They should fit tightly. I used pliers to press them. Print one to see how it fits and if you need to scale it based on your printer's settings. There is a left and right that need to be oriented correctly to fit in the honeycomb storage system. Orientation is while looking from the back.
The files for the skadis dropper bottle holders can be found in TheRooster's original post in the model origin below.
