1 / 5
Retrofit parts for vintage Dytek Line Master LM204 Vise — zdjęcie 1
1 / 5

Retrofit parts for vintage Dytek Line Master LM204 Vise

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some retrofit parts for a vintage Dytek Line Master LM204 Vise if you find one!

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I needed to bring this old 50s-era American-made vise back to life instead of throwing it out with new soft jaws, a new knob for the turning crank, and new feet.  Hopefully these parts help someone else someday !

Jaws provided in a variety of tolerances to suit your material.  I used an offset of -0.1 mm for the 95A TPU I printed in, but if you use PLA/PETG you may want a tighter /looser fit, so i provide files for those options in 0.05 mm face-offset-distances  (negative is looser fit, + is tighter fit).  For the feet and the knob, you can just scale them if they don't fit, but I found it fit as-printed.

Default all-parts 3MF has my recommended sizes included ready to print on a Bambu Slicer 3MF.

STEP files included in case you want those too.

Tagi