Retrofit parts for vintage Dytek Line Master LM204 Vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some retrofit parts for a vintage Dytek Line Master LM204 Vise if you find one!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I needed to bring this old 50s-era American-made vise back to life instead of throwing it out with new soft jaws, a new knob for the turning crank, and new feet. Hopefully these parts help someone else someday !
Jaws provided in a variety of tolerances to suit your material. I used an offset of -0.1 mm for the 95A TPU I printed in, but if you use PLA/PETG you may want a tighter /looser fit, so i provide files for those options in 0.05 mm face-offset-distances (negative is looser fit, + is tighter fit). For the feet and the knob, you can just scale them if they don't fit, but I found it fit as-printed.
Default all-parts 3MF has my recommended sizes included ready to print on a Bambu Slicer 3MF.
STEP files included in case you want those too.