Scooter Handle Turn Signal Retrofit - Button Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect the button on your retrofitted scooter handle from accidental activation!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Recently retrofitted your scooter with turn-indicator handle bars? (Now mandated by Austrian law)
Stored your scooter overhead in the train?
Brightly flashed your indicator light when the button at the end of the handle bar accidentially touched the train car's ceiling?
Try this protection cap!
It adds a short rim, extending over the handle bar and prevents any objects from accidentally touching the button.
Specs
Currently, versions exist for the following handle-bar diameters:
36.6mm
Modification for handle bar diameter
The diameter of the handle bar is adjustable. As are all other dimensions. Just drop me a message or d.i.y. in FreeCAD. If you do, please tell me about the diameter you needed in your Make :-)
The model was designed in FreeCAD, and the FreeCAD source file is included so it can be modified or adapted.
Features
protects button of retrofitted scooter handle with turn indicator
small
prints without support or brim
FreeCAD model included
Printing
print oriented as cycliner with thicker part on print-bed
Support: none needed
Brim: no
Infill: 0%-15%
Wall-Strength: add 1-3 walls / perimeters
License
Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0
Share with others
Don't keep your modifications to yourself
Always attribute the source!