Liczymy pasujące modele…
Because this ring alrady broke twice I created a more stable version myself. In my opinion It is much more stable than the original. The original tapers slightly downwards, which I have not implemented because it is not necessary. Print…
Keeps the standard mi scooter display protector from falling off and shifting around
With this practical hook for the Xiaomi E-Scooter, you can always carry your luggage safely. The accessory is compatible with the Xiaomi Pro 2, Pro, M365, 1S, and Lite and can be easily attached. Use it to transport your bags, backpacks,…
Xiaomi M365 / Pro2 rear fender for 10 inch, 8cm wide tire Printed on Creality k1 max (300x300 bed) Slicer will ask to rescale it at first but select no, and rearange the part to fit the bed. Printed at 0.4 mm nozzle PLA (Abs recomended)…
Diseño para proteger ante arañazos la pata del xiaomi m365 pro. Imprimir preferiblemente con filamento flexible.
Remixed this fender hook for my Xiaomi Mi M365 Pro (will work with standard M365 too) with Fusion360 to be mounted with M5x20mm bolt and M5 "nylock" nut (so it doesn't come loose). My original hook got ripped off the fender (original bolt…
Este adaptador esta creado con el fin de cuando, se rompa el foco original del Xiaomi m365 poder tener una linterna.
I did this with what I had at home This is the first version diy led strip holder for M365 pro2 need: HARDWARE: bl-5j battery Wire,solder..... led strip (5m-60-ip67) :…
Configurable for up to three single or double cables. The stl files are for an additional 2 x 2.5mm² (14AWG) cable (external battery pack) For Xiaomi Mija M365, 1S, Pro2 and similar E-scooters. Use soft TPU filament.
Trailer hitch for Xiaomi M365 that you fix to the rear fender with a pin or a screw. The other part is made for a homemade trailer.
here is a disc protector with integrated light for xiaomi M365 for ULIP suspension only.
Xiaomi Mijia M365 mudguard rubber plug Print with TPU Ender3 needs small extruder modification to print with TPU. Find it here https://www.thingiverse.com/thing:2144277 Print Settings Printer Brand: Creality Printer: Ender 3…
rear mudguard without light for xiaomi M365 with ULIP suspension
Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…
Une protection du disque arrière pour la trottinette Xiami m365 avec emplacement d'airtag de chez action (Balise connectée Fresh ’n Rebel) C'est bien moins chère que le airtag de chez apple ;-) Impression avec support Il faut ouvrir le…
This is a quick remix I did of the original to add a longer mount arm so I could fit my gopro-compatible camera on the front. Note: Manually migrated from Thingiverse at https://www.thingiverse.com/thing:3640494 as import is broken :(
Model replicated from the original, the threaded nut needs to be glued. I recommend printing with ABS and looped 2 walls
in order for the 10 inch wheel to fit, i had to mount the wheel a bit lower. but the reflector cap did not fit anymore,
use TPU, 10% cubic infill to stay soft and print the top normally, place round side up
I crashed my scooter and broke the original screen cover and so I made one. If you want to replace yours too I'd recommend getting a very good first and second layer on both prints. I had to do a lot of postprocessing to fix my mistake.…
A screw cover for the right side cover of the front wheel of a Xiaomi M365 electric scooter, matching Hejaaa's rear wheel screws cover (which also works for the left side cover of the front wheel). To quote Hejaaa: "More durable cover…
Printed on MK3S+, with PLA+. Can easily withstand the weight of a filled grocery bag
To install, all you need is a M5, approx 12 mm long and one M5 nut. First thing to do is to unscrew the upper M5 already installed below the handlebar/light. Then install the Mount in the same thread using the 12 mm M5. Then the old M5…
When using the m365 cargo hook from stepan over on Thingiverse ( https://www.thingiverse.com/thing:3641249) I had the problem that light things fall out when it's a bit windy. So I made this little lid that slips over it. Some…
It need to be printed with a flexible material like TPU
KEY BENEFITS: no need to remove the wheel for installation no need to readjust brake disc no need to change the original screws (just add 1XM3 10mm and 1XM3 nut) no need to modify the original rear wheel cups suitable for 8 and 10 inch…
Tesnenie na vylagrovany klb riadiacej tyce.
Print with PLA and then fill with household silicone -> let cure for ~2days then open the mold and fit the cable protector You need the following hardware: 2x M3x30 Screws 4x M3x16 Screws 6x M3 Nuts Category: Sport & Outdoors
I have broken my one. So I made it in Fusion 360. Added V2 with increased outer ring for 0.2mm and tab for easier opening Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100…
Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.
Universal lock holder for the Xiaomi M365 and M365 Pro scooters. Supports different lock diameters (20 mm / 23 mm) and allows easy installation without disassembling the scooter or steering assembly. Required Hardware 4× M4 nuts 4× M4…
Secure charger case for Xiaomi M365, M365Pro, Pro2, Essential, 1S, Scooter, Scooter. Design intended to be suspended on the handlebar (handle, axis or bell). If the charger is to be put in a place of passage, install the charger after…
This is a Xiaomi Electric Scooter charger holder for Schneider Classic double. To connect to two pieces use M5 screws and embedment nuts. Double sided tape inside of the hanging part is required to securely hang it on the outlet. A…
Broke my front mudguard (by over tightening the screw) after replacing my front tire. Definitely needed when driving through the rain! Position the model on it's side on the build plate. Support on the wheel side probably isn't necessary.…
Exact copy of the original. You will need the nut and screw from the original to use it. Better to print with 100% infill
I charge my E-Scooter in my Homeoffice and didn't want to have the powerbrick lying on the floor. So I designed this small mount for my desk to have it away from my roomba. Can be printed without supports. Material: PLA Printer: Prusa Mini+
No Supports is needed. PETG, 4 perimeters. Original from: https://www.thingiverse.com/thing:3190522
STLs All files are in correct Z orientation Main (Use one of the following) + main.stl (for ~22.5mm handlebar) + main-short.stl (shorter stem) + main-32mm.stl (for ~32mm handlebar) * jaw.stl * screw.stl Clip (Use one of the following) +…
This is the left cover for the front axle for the M365 scooter. Category: Sport & Outdoors
Stronger connector part ( hopefully ) Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Generic PLA Category: Sport & Outdoors
Additional this disc cover was used: https://www.thingiverse.com/thing:3482419 I have permission from the designer to remix. Print Settings Supports: Yes Resolution: 0.2 Infill: 50 Post-Printing Remove support ^^ Category: Sport & Outdoors
This protects the cable connector in the rear of the scooter from being damaged over time. I just glue it in.
I had the cable break clean off when the rear mudguard broke. I replaced the mudguard and soldered in a connector but still wanted to protect the cable. This screws in between the scooter and the mudguard and will keep mud away from the…
I printed mine in polycarbonate with 5mm wall thickness and 35% infill. I have not tested any other material.
This is an addon for the Xiaomi M365 universal clamp model (also on this site)... https://www.printables.com/model/40227 i made the addon to fit my cable lock… Fully compatible with the Universal Clamp… Happy Printing
Vistula blatníku pro Xiaomi M365 / M365 Pro ja mam Sencor two pro ní prodloužit o 5%
The holder's design integrates with the style and looks of the original parts of the scooter.
usefull simple design for avoid the bad view after shock absorber modification.
usefull accessorie for foot stand after shock absorber modification
A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…
A lock mount fo the M365 scooter. Used M4 screws and nuts to secure in place. Category: Automotive
Xiaomi m365 rear wheel side cover - Tapa lateral rueda trasera con agujero Category: Sport & Outdoors
Soporte para fijar el guardabarros del xiaomi m365. ( Para imprimirse necesita, al menos, colocar un soporte en la parte más alta, donde engancha con la luz del guardabarros) Xiaomi Mijia M365 Mudguard Bracket (needs at least 1 support in…
Print from the side. v3.2-> Fixed the light holes and perimeters. // corregidos los agujeros de la luz y los perimetros superiores LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without…
Necesita soportes, es un poco más corto que el original EDIT: v2: se ha ajustado la distancia del enganche para el gancho de pliegue, debería quedar similar al original. - hook position fixed LICENSE: NON COMMERCIAL prohibida la venta de…
Xiaomi Mijia M365 front GoPro Mount Better in PETG Need Supports LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden CHANGELOG: v7…
Ganchito con una entrada más fina para que no escapen las bolsas con las vibraciones..-> Mejor imprimir en PETG, ->IMPRIMIR DE LADO para mayor resistencia, haciendo que la primera capa sea un lateral. LICENSE: NON COMMERCIAL prohibida la…
Flexible filament only. Category: Sport & Outdoors
Flexible filament only. LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden Category: Vehicles
Front cable protector for Xiaomi Mijia M365 Scooter LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden Category: Vehicles
Front wheel nut bolt and power cable protection cover for the Xiaomi M365 Pro front bumper.
Updated 2021-06-26: Was bored, sliced a couple of alternative styles in Meshmixer. :D Original: Extremely simple mudguard extender for the Monorim M365 rear suspension. Attach however you wish, I used an M6-bolt, washers, and lock nut,…
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them. This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes…
Charge your Xiaomi m365 scooter with a car. Set the StepUp to 42V and 1.7A like the original charger: First set the Voltage to 42V Then turn the CC-Adj 30 turns clockwise to set the Current very low Plug to the Scooter Slowly raise the…
Because this ring alrady broke twice I created a more stable version myself. In my opinion It is much more stable than the original. The original tapers slightly downwards, which I have not implemented because it is not necessary. Print…
Patient: Xiaomi M365 Pro Disease: Broken mounting of front mudguard Cure: 3D print, 2xScrews, Hot Glue Skechup file - included Post-Printing 1. Break your mudguard 2. It's bad :( 3. Print a part. Put 2 x screws 4. Should be like this 5.…
C’est un cache de batterie et remplacement pour la m365 pro et modèles. Compatible dans le cas où il n’y en a pas ou il est trop endommagé. moi, je l’ai fait en pla mais vous pouvez le faire dans differentes matériaux soit resistants aux…
Hi! I propose a support for iphone (5/5S/SE) for the scooter xiaomi M365. This support is quite simple but effective. It is positioned above the central gallows and is divided into two parts that come clipped together. The support allows…
I made this model for my bike it should fit most bike seats, the light sits angled in the adapter, I fixed the light with hot glue and fitted it to the bike with 4 zip ties.
3 models of xiaomi m365 pro or pro 2 scooter hooks (it will probably fit other models) the first is a slim version for light luggage need 14mm screw with flat head second one (strong) needs a longer 20mm screw with cone head and you can…
Simple side stand riser for scooters like the Xiaomi M365. Rises around 20 mm high, perfect for scooters with extended front or rear bumpers. Three m4 20mm screws with nuts are required.
soporte adaptador para sustituir la pinza de freno original de tu xiaomi m365 o similar por la pinza de freno semi hidraulica XTech. La pinza de freno puedes encontrarla por aliexpress por unos 15€ Print Settings Printer: prusa i3 Rafts:…
esta pieza ayuda a que no se mueva tanto la bolsa de la bateria externa en tu m365 o similar Print Settings Printer: prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: PLA PLA black Notes: Puedes imprimirlo en 2 partes,…
Since I like more rounded shapes and more contained lines, I made some small changes. Increased screw housing and side t
I made a better wall mount for M365 and M365 Pro. It's made for small printers like a Ender 3. I hope you like it. The scooter is resting on the front wheel and handlebar/light. Please comment what you think. :-) Print Settings Printer…
After several iterations, this is the best trailer hitch I could make. It's very small compared to what I started with and yet very strong. Only uses about 25 g of material with heavy infill, and 50 g if completely solid. Requires 3 M3…
Keeps the standard mi scooter display protector from falling off and shifting around
ENG Expansion board mounting bracket for xiaomi scooter M365 (all versions / PRO / S1 / ....). The board can be made or bought, for example, from berryboards 2 files for M5 or M6 screw I have tried that 4 pieces are enough to attach one…
Dieses Tool entstand daraus das man die Montagehöhe ändern kann, falls man ein Gepäckträger oder ähnliches verbaut hat und dadurch der Haken nicht nutzbar wird. Durch das Remix ist die Höhe variabel. Gedruckt auf ein Ender3v2 mit PETG,…
A clamp for Xiaomi M365 electric scooter. Fits all "Just Why Design" gadgets. Three M4 and two M6 screw sets and 3M double side sticker should be used during installation.
A holder for a 0.5l bottle (64mm diameter) from "Just Why Design". You will need one "universal clamp" - https://www.prusaprinters.org/cs/prints/40227-xiaomi-m365-universal-clamp - to mount it on your Xiaomi M365.
An eye from "Just Why Design" to be mounted on your Xiaomi M365 scooter. It is ment to be used with a strap to carry your scooter. You will need one "universal clamp" -…
Use this plug to fill the valve hole after you change stock tires for the solid or honeycomb tires. Print instructions Print this with 2 perimeters, 30% infill, layer height 0.2mm and use TPE or some rubber material.
This is cap for xiaomi mijia leg. Print it from flexible material. Category: Sport & Outdoors
Mount for this headlight: https://aliexpress.ru/item/33014445820.html Does not interfere with Monorim front suspension. Single M5 screw and nut required (washers are optional). Everything else comes with the headlight package.
The mount will be printed directly with supports. Supports is easy to remove after printing and process the landing site with a knife. The mount, like the original one, has a flashlight tilt adjustment. Attaches with two screws holding…
Replacement brake light for a KCQ Xiaomi M365 clone. Couldnt find a translucent red polycarbonate filament I could print so PETG wins. If anyone tries this with PC and has good results I'd love to see it! Base: Jayo PETG, Black 15%…
Xiaomi M365 back fender support for 10 inch tires. If you found this useful, please donate what you think it is worth to my https://www.paypal.me/Aminokislota . Help cover the time of design. Thanks, Enjoy! Category: Other
I took the already great idea and improved it in the following aspects: 1. Added two clips, meaning you no longer need to glue the part onto the scooter. This works best with PETG, since the clips are very strong and springy then. 2.…
I've created a mount for a U-Lock for my Xiaomi M365 scooter. The diameter of the lock rod is ~14mm so the hole is 14.5mm. You need 2x M3x10mm Socket Head Screw and 2x M3 Nuts. Print with PETG for flexibility & strength. I've added the…
Phone Mount for the Xiaomi M365 / M365 Pro designed for the iPhone 6/7/8 with a case. Hardware needed: 2x M3x8mm Socket Head Screws 2x M3 Nut I've added the Fusion 360 files if you want to edit the design :) Print instructions PETG 3…
I made this cover, to avoid small stone/debris getting inside the tyre that might cause a flat tyre. Correct airpressure is what I think causes most flat tyres, but this could be a soft spot too. Atleast on my m365, there is a lot of air…
