Xiaomi M365 Fender Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fender hook that uses M5x20mm bolt and M5 "nylock" nut.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Remixed this fender hook for my Xiaomi Mi M365 Pro (will work with standard M365 too) with Fusion360 to be mounted with M5x20mm bolt and M5 "nylock" nut (so it doesn't come loose).
My original hook got ripped off the fender (original bolt went through the fender), so I used two washers on the bottom of the fender, so as to make it virtually indestructible now. If you are not using washers a shorter bolt might be better (maybe M5x16mm or 18mm will do the trick)
Model is already oriented in the correct printing position, only need to add some supports for the overhangs, and bolt/nut hole.
I printed it in PETG, but you can choose to print in any material (beware PLA might soften & deform in high summer temperatures).