Liczymy pasujące modele…
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than a…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
A backplate for Fender Strat with offset fender logo. I would reccommend printing with the logo facing down and then filling in the logo with permanent marker so as to make it nicer.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
While in the Endor Imperial bunker scene in Return of the Jedi Leia uses the “SoroSuub Corporation (SC) X-30 “Lancer” target blast pistol”
Model courtesy of the excellent folks at the Helldivers archive, uploaded as an STL for your optimal printing experience
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
Inspired by some examples I have created this bracket to mount the license plate on the Piaggio Zip scooter without fender. You have to add two M8x20 bolts and lock nuts to mount the two halves together. The frame can be mounted on the…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20766 Thanks for your…
Da das Schutzblech vom Soflow SO3 immer reißt habe ich ein eigenes gemacht. Einmal für den Prusa Mini und für größere Drucker. Den Haken habe ich aus TPU gedruckt. Druck es mit 4 Konturen Since the fender of the Soflow SO3 always tears, I…
I did not design this. All credit goes to Tony @ Floatwheel. I do not have the source file. https://floatwheel.com/
These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The intent of this design is to solve 2 problems of the original design Tire rubbing (appare Compatibility of the Drop Top…
Hi there, I created some fenders for my Evolve GTR skateboard with the 150mm(6inch) all train wheels. I printed the fenders in PETG with 3 perimeters and 0.2 layer height. This way they are still a bit flexibel incase you hit something or…
Printed in PETG and stuck on using silicone sealant.
Top drop fender that allows for the lower ride height position of the standard adv without any other 3D printed parts. I designed the new fender around the 3D Model provided by tony. The latching mechanism is just like the original,…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20759 Thanks for your…
Attention! If you have a 12" tire, this is not the model you are looking for! For 12" tires like the Thundercat check out my new design: https://www.printables.com/model/1345564-floatwheel-adv-btg-mudguard-and-mini-fender-for-1 Original…
Dieser Haken ist für den E-Scooter Soflow So3. Das Schutzblech hinten geht immer kaputt, weil man es runterdrücken muss, um den Lenker einhacken. Mit diesem Haken dürfte das nicht mehr passieren. Du kannst die zwei originalen Schrauben…
Thundercat BTG tire is HUGE! These mudguards and mini fenders were designed to fit the big kitty. These models may undergo further renditions, so check back and reach out on Discord or Reddit with any feedback. Note: Mudguard file updated…
INTRODUCTION These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel . This top fender was created for all those who want to print the fender at home but don't have a large print…
Edited version of stock one to be flat.
BTG minifenders for the ADV and ADV Pro Beefed up comapred to my previous version. moves the droptop 14mm higher up so you can either use these lowered or with a BTG.
Since the summer is short in Sweden, might as well kit the board with fenders to be able to ride when it's a little wet outside :) These fenders fits the Evolve carbon gt snuggly. Not sure if the truck axles are the same on other boards,…
***THIS MODEL HAS BEEN REPLACED WITH AN UPDATED VERSION*** https://www.printables.com/model/1343374-floatwheel-adv-printable-drop-top-fender-base-20 My Floatwheel ADV Drop-Top Fender Bases keep cracking and I wanted a way to print…
A snap-in fender that works with the ADV and ADV Pro from Floatwheel. Selling is prohibited but feel free to print yourself a few and paint them with awesome colors or themes!
To make your XR or Plus look more like a Pint. There are STL's for 3d printing available, but also DXF for lasercutters/CNC routers. Album of it in action: https://imgur.com/a/NMT0Pz2 The options are; With or without openings for the…
Requested by the community, I release new models in this upload. These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. These new Minifenders respect the height of the original…
A Floatwheel fender that allows for maximum tire clearance to fit tires like the Burris 11.5x7x6. Use any material you like for the shield. Polycarbonate and polyethylene are good choices. 1/8" thick should be sufficient. 8" wide. 17"…
Floatwheel ADV Short Fender Burris 7 inch
This is a remix of a remix from Kagman and echo6152 at…
Untested Fatbike Fender Mold Element first draft 30 degree segment... Elements are to be bolted together with M5 screws min 35mm long. Category: DIY
The Story This is a memorial for a work friend's evolve GTR all terrain skateboard. These skateboards look seriously cool ( https://www.rideevolve.com.au ). I don't have the talent or balance to ride one but he does. We spent some time…
Wanted to put Little Dog Air Freshener in my Land Rover 110 but it doesn't have vents. I created this plug to replace the plastic bung that was in my centre panel (lighter socket on the right empty space on the left) some defenders have a…
Drucken Sie beide Teile, stecken Sie Micro-SD-Karte oder Papier mit Anweisungen. Verkleben Sie es entweder Punktuell, vollflächig, Wasserdicht, wie es beliebt. Das Innere Loch hat eine Größe von 18 x 18 mm und bietet genug Platz. Durch…
My Floatwheel ADV Drop-Top Fender Bases keep cracking and I wanted a way to print replacements without a ton of supports so I split the OEM model and made some alignment pins to help me glue it together. The top half still needs a small…
Standard fits easier but may have bigger tire gap, the tight edit will have minimal tire gap (<5mm) and looks better IMO - but fair warning, may not fit immediately! I would start with the standard edit and print the tight ones if you are…
I made this fender to attach to two threaded holes on a Razor E300 scooter frame that I stripped down to convert to a two stroke engine.
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
I designed this scratch plate as a direct replacement to the original one. The original plate was scanned in 2d then imported into CAD where it was made into this design. This is in 2 pieces for the ability to fit onto a print bed - the…
Simple rear fender for Onsra Velar. Replaces existing belt covers. Update: 1000km later and these are still in place. I printed with just simple PLA with low infill. Something broke loose in one of the fenders inside in the infill but it…
I used carbon fiber petg and 4 perimeters at 50% infill, but you can use any outdoor safe filament you want (it will be holding very little weight). it is a permanent mod so maybe sleep on it before committing.
Mini fenders that are compatible with TFLs droptop fender for XR. https://thefloatlife.com/products/drop-top-fender-top-only-gt Works with straight rails as is, but you can use the adapter TFL provides to make it work with non-straight…
I made these bushings to lock the stock bridge of my Squier Mustang Classic Vibe when I hardtailed the Tremolo. I've seen people use electrical tape and that didn't seem as sturdy so I made these bushings. They are slightly tapered since…
This is a remix from link below. I liked the way the Sur-Ron front fender looked also didn't feel like spending $30 on the mx350 plastic, so I resized it to fit the mx350 and added a hole for the bolt. I made two my first attempt came out…
Spesso si usura molto facile così ne ho creato una copia con l'occhiello più grande e più spesso per prevenire l'usura.
Imagine you are 3 hours into a 3D model design you haven't saved yet (I know…) and suddenly your beloved Fluffy hops up on top of your PC and pushes the power button with her pretty pink paws. All of that work down the drain. If it…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Additional mudguard/fender on my "Fully" to protect the rear suspension and the drinking Bottle I use it on my Giant Stance E+ 2024, the Insert is TPU to fill the space between Fender and Bike and protect the Paint. For mounting I used…
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time. The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and…
General Description: L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer. The body sits on my custom SCX10 chassis. You can also find it here on Printables. Parts description -…
The front and rear fenders are the same, and the rear mud flap is unchanged from the original. The front mudflap is cut away to make room for the bend in the X7 rails. If mounted on X10, flat or other rails, you can use the rear mudflap…
RC SCALE EXPEDITION OFFROAD TRAILER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. 002_Axle_A can be reinforced by…
Print fenders in ABS or PETG, Mud guards best printed in TPU. Use your own judgement for infil. This will only work on rails with same footpad angle and distance as X7. Really probably only the X7. Definitely won't work on X10 Tested this…
INTRO Meet the DEFENDER; A tanked UGV. Measuring: 890x740x660mm ( LxWxH ), & powered by 2 BLDC drills; This completely 3D printed ( with the exception of the 2040 extrusions for structural support ) UGV can handle whatever you throw at…
This design comes in two versions. The story behind it: Originally I designed the fender extension to have that rounded trailing edge. However my first print ran into a little problem and the parts were cut off a couple of millimeters…
I printed it in pla, seems to be holding up pretty good so far. Not sure what size the fenders are, but they are about 5.4 cm wide at the widest point. (I have 700x35c tires, and could probably go bigger).
The model consists of 7 pieces: 2 mini fenders 1 drop top 4 little connection pieces I recommend printing the mini fenders in TPU, with 5-6 walls and 15 gyroid infill for a good mix between stiffness and impact strength. (my PETG…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
Mini fender, mud guard, and DTF base piece, all in one! For X10 rail angles with BTG tire. Fits both the raised and lowered rail positions with the TFL Thundercat BTG tire. Larger tires or offset (raised AND lowered position) may require…
Windscreen demister with wider vent opening allowing for better air flow and outlets for side window demister vents. Also includes outlets that can be used for side windows. To connect output to side windows needs 20mm ID flexible pipe.…
Mini fender, mud guard, and DTF base piece, all in one! For X7 rail angles with 11in tire, Fits both the raised and lowered rail positions. Larger tires or offset (raised AND lowered position) may require modification to the riser. This…
H0 scale resin model kit of the LR 110, scaleable to other scales. I hope you enjoy building it!
Complete Onewheel TFL compatible drop top fender for funwheel X7 (or onewheel XR). The top fender didn't actually fit on my Bambu lab P2S. I printed it on its side on supports and used Bambu Studio to cut the ends off. It won't harm…
This is a small tray to fit in the top of the center console of a 2020 or newer Land Rover Defender (without the fridge option) to provide easy access storage. It is a tight fit needs sanding around the top lip and deburring to make it…
I couldn't find a good template for routing a mustang vibrato, so I whipped this up. Also has the locations for the bridge thimbles. (just a note about thimbles, these are based on stock thimbles, if installing a mastery they will need to…
Fender for balloon race car to prevent the balloon from hitting the tires. Print 2 and glue them on. I printed them standing with supports.
just print and tap with your bike's spoke threads, and attach. easy peasy
Designed to fit my beautiful Fender Player Plus Precision Bass guitar without drilling any holes. It uses the scratch plate holes and hovers above the top screw of the precision pickup. Note the two holes are 103.5mm apart, and it is the…
Mount for holding Magsafe phone charger to Defender TD5 dash, uses two bolts to bolt through the dash top panel. Fits an iPhone 12 Pro using the charger linked below.…
TRX-4 Defender Sandboard w/ Holder to the Rollcage Remix of these two together: Sandboard: https://www.thingiverse.com/thing:4844876 Holder: https://www.thingiverse.com/thing:3278360 will post better pictures soon
The stock SKS adapter only allows two tilt positions , which makes it impossible to sufficiently raise the rear section of the fender. This becomes an issue when using wider tires or when additional clearance is needed for suspension…
Mudguards Mudguards for the Floatwheel ADV/Pro with BTG tire. I haven't tested them on ADV2 (it has different motor plug) but it should fit coz apparently ADV1 has chunkier motor plug anyway (but better check). Can fit Onewheel Threaded…
Interior lighting for Land Rover Defender requires an LED strip, which can be found in electronics stores. Made of PP material, due to its flexibility, the model may contain flaws in measurements or design. Installation is at your own risk.
Design Concept The Low-Poly Defender of Love is a stylized sculpture representing love and strength, ideal for Valentine's Day displays or gifts. Usage This model can serve as a decorative piece or gift for a loved one during Valentine's,…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
Can be mounted to the fork with two zip ties. Maybe add double sided foam tape between fork and holder to reduce ingress of dirt. Needs a M5 nut for mounting the Fender struts. Was printed in simple PLA.
I printed the latch with PETG. I printed it on its side to give the layer line orientation the greatest strength at 30% infill 6 perimeters. GCODE with those settings attached.
Boat fender clip for hanging a fender on the guard rail (25 mm or 1 inch pipe). Remember to tie a knot on the line after you thread it through the hole. Category: Sport & Outdoors
Tuttio Short Rear Fender – Low Profile Tail Tidy This is a clean, low-profile short rear fender designed specifically for the Tuttio electric dirt bike. The goal of this design was simple: tighten up the rear end, remove the bulky stock…
THIS IS AN OLD MODEL AND MAY NOT BE PERFECT. DESIGNED 100% BY ME. This is an independently designed aftermarket part and is not affiliated with or endorsed by Electro & Co. ETM RTR Rear Fender – Clean Tail Tidy Mod This is a low-profile…
The best quality miniatures are usually resin printed for size purposes, but it is possible to FDM print, it just might be weak and low detail. It is intended as a humanoid steel defender for the Battle smith artificer subclass in D&D,…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Keep mud out. Also has a small cutout to wire a magnet sensor.
Made from TPU this allows it to push into original hole and grip bulb holder. Do not use 5w bulb keep to original max 3w
Recent Woom bike fenders are not compatible with FollowMe bike carrier axes. Here is a fix.
Front axle for Bruder Land Rover Defender This is a drop in Replacement. A little more sturdy than "Stock"
I designed these fenders to fit a Zuca EZ-cart though they should also fit Zuca's LG backpack and Transit carts. Notes: All printed parts were printed in PETG with organic supports on over 30 degrees overhang and 25% infill. I designed…
Created this mount for increased splashwater-protection as the original mounting situtation for the fender did not provide enough. This will hold the fender just above the tire as it is held down on the movable part of the fork and will…
I printed it in PETG but it crackt at the walls on the side from it goes on the shaft i was riding on gravel roads and the vibrations cracked it i think it would be solved if you just print it from TPU
Mini fender, mud guard, and DTF base piece, all in one! For MatixBuilt rails with BTG tire. Larger tires or offset (raised/lowered position) may require modification to the riser. This interfaces with the GT XL/BTG fender, not the regular…
The Untamed Ox, Cast in Utility. This is not a vehicle. This is the unwavering companion of explorers, soldiers, and shepherds, cast in box-section steel. The Land Rover Defender 90 immortalizes the indomitable, go-anywhere spirit that…
This fits the wider rubber part of the brake line that is 14 mm in diameter. I tested this with HEL brake lines on a GSX-R600 K8. It requires: A 4x1.5 mm zip tie (or smaller) Two rivets: it's designed for a 3 mm rivet, but it might…
This is a set of inserts to hold game components and making setting up and putting away the game as fast as possible. There are four files: enemy token holders (need one for each of the three enemies), dice and gem tray, enemy card…
The Problem If you own a KingSong S18, you probably know the annoying rattle caused by the inner wheel cover. The original design relies on only two small screws per side, which often loosen over time, causing the fender to vibrate or…
About this collection This is a three-piece functional kit for fat e-bikes with a rear rack. The goal was simple: extend the rear protection, clip a battery-powered tail light, and store small electronics under the handlebar — all in a…
Already tested and working 200+ kilometers - Upper part with reflector (PLA material) If this fender lasts 200 kilometers without any damage, then I will update this description to already tested and working. ;-) You can choose from two…
I've used this mount in my Defender 90 for a good while now and I'm very happy with it. It's printed in PETG using 0,20mm QUALITY layer height. You will need M2.5 countersunk machine screws in 12 mm and 6 mm lengths. The short screws (2 ×…
