1 / 2
Fenders for WPL C74 Suzuki Jimny 1:10 scale
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jimny will get larger wheels and body needed some trimming and extra fenders
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 1016
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
Place fenders on the body aligning their ends with the lower edge of the body.
I used a bit a CA glue to hold it in place, then drilled wholes and added M2 bolts and nuts.
I did not remove all the interior parts so in some places the nuts are missing, used a drop of glue to hold the bolt in place.
Trim the body to be flush with the fenders.
