Alta Redshift Motorcycle Rear Fender Brass Insert Repair Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part is designed to replace damaged attachment points of the rear fenders of Alta Redshift motorcycles.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This piece will replace the little brass threaded inserts that commonly pull out of the plastic on the rearmost rear fender attachment points of an Alta MX and MXR, or the second to last pair on EX, EXR, and SM models. There are models of two different versions to try, V1 or V2. Simply remove brass insert completely, clean out the hole and drill straight through the top side of the fender with a 19/64" drill and (if using version one part) insert 3D printed part from the top and use a #8 self tapping screw (such as this example https://www.mcmaster.com/96001A326/) to reattach. Version two part is designed to insert a M5x.08 35mm long bolt through from the top and use a nut to secure from the bottom.