Liczymy pasujące modele…
Drop in grip module to convert the ACE Arctus grip to a CZ Shadow 2. There are many options for various grip panels. You can use aftermarket grip panels or print the grip panels directly into the model. The trigger is modeled to be in the…
The "Full Extension, Rack and Pinion, Linear Rail" drawer, or FuExRaPiLiRa for short (it was originally going to be called FLDSMDFR, but that was taken - what are the odds!?). It's a drawer system that prevents the drawer from being fully…
Elevate your AceXR experience with this professionally engineered Glock 17 Generation 5 shell, featuring a fully overhauled and stress-tested Fire Control Unit (FCU). While the original concept was a great starting point, this version has…
Cap height parameter can be changed in the Fusion 360 model to create a custom component. PLA and PETG filament is probably the best material to use for printing. Use 3 perimeters and also 3 top and bottom layers with 20% infill. Print it…
Cap height parameter can be changed in the Fusion 360 model to create a custom component. Use an 10mm long M6 round head screw to secure the bracket to the extrusion. A longer screw bottoms out in the extrusion and a shorter one is not…
Eine c10 karosse für ein exreal chassis. kann auch für andere Rahmen verwendet werden. original version: https://3dwarehouse.sketchup.com/model/25627aff4197b7b2868c4d0955275407/1971-Chevy-C10?hl=sv Support thread:…
Press to fit End Cap Fit Bosch-Rexroth extrusion 45x45 profile I print them solid, they fit sung
Fits 18s2p 21700 and 19s2p 21700 packs for the XR frame. Fits 21.7mm and 24mm Gland Hex Nuts Buy one here: https://www.atlowshop.com/product/vexr-19s-battery-box/ Use with our Bombproof Lid:…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
simple cover for a aluminum profile
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
Scale Model of the WSR-88D NEXRAD Radar dish and pedistal. Model was done in Fusion 360 using drawings from the techmanual. Some parts have been scaled up to allow 3D printing. my printer was pretty small back in 2018, so I printed each…
If you need to assemble some Bosch Rexroth profiles, then this is what you need. The premade G-Code, is made so that the bracket is solid PETG, as you want it to be strong i recommend using strong filaments and print them solid, if it is…
If you have to place two pieces of extruded aluminum on top of each other in a cross pattern this can be used to hold them square in a small footprint and minimal bolting.
Remake of the original using Fusion 360. f3d file included. Mount a Bosch Rextroth 45x45 aluminum profile to a table. Layer hight: 0.2 Infill: 20%
Overview TexRC KerbTex Hairpin Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 90 degree corners and 45 degree corners.…
Hey everyone, I needed an end cap for my 45x45 aluminum profile. The four inner flaps create a nice friction fit so they don't simply slide off. Check the profile in the second picture to verify your profile looks similar. Let me know if…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
These 3D printed covers secure and cover cables located into the slots of Bosch Rexroth 10mm Aluminium Extrusion. When located over cables especially thicker ones it can help to place the cable inside the cover before starting and/or…
4 Variants: 6 pin Motor Connector - 16 pin Molex Harness 6 pin Motor Connector - m20 Gland Harness Superflux Motor Connector - 16 pin Molex Harness Superflux Motor Connector - m20 Gland Harness Buy one here:…
Size parameter can be changed in the Fusion 360 model to create a custom component. Use an 10mm long M6 round head screw to secure the bracket to the extrusion. A longer screw bottoms out in the extrusion and a shorter one is not…
Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…
Remix of G6HOQ hinged feet for FlexRadio Maestro controller. OnShape used to build models from the original STL files. Added extra cross section to bracket and feet to stiffen the parts and reduce flexing. Added 2mm deep by 26mm diameter…
This is a clip on flange for flushmounting or fixing flexible conduit pipe into an electrical box. The model provided is for 20mm flex conduit. I attached the Fusion files with which you can easily change the Parameters to make it fit…
The thread M6 is one the tighter side, tools are necessary for standard M6 screw. Please note, that your printers accuracy/tolerances may differ from mine, scaling may necessary. If you're interested in other thread-sizes or models for…
Mount a Bosch rextroth 4545 alu profile to like a table. Layer hight: 0.2 Infill: 20%
Zur Montage werden 2 Schrauben (Holz/Blech) 4x20 benötigt
Dust cover for the Maestro C Console. It could be fitting on other models also. Let me know if you tried. Cover is in 3 parts. So its fits nicely on the most build plates. Face down ‘’so the flat side is on the bottom" The Right part you…
PLA and PETG filament is probably the best material to use for printing. Use 3 perimeters and also 3 top and bottom layers with 20% infill. Other designs for BOSCH REXROTH 3030 extrusions: Right-angle connector Cap / foot Side bracket
Materialsparende Kappe für 63mm Aussendurchmesser Installationsrohr. Vermeidet das Eindringen von Wasser und Tieren. Je nach Schlauch ist ev. ein verkleinern/vergrößern um 1-2% notwendig damit die Kappe genau sitzt und von selbst hält.…
Overview TexRC KerbTex Large Radius (600mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 90 degree corners and hairpins.…
Materialsparende Kappe für 50mm Aussendurchmesser Installationsrohr. Vermeidet das Eindringen von Wasser und Tieren. Je nach Schlauch ist ev. ein verkleinern/vergrößern um 1-2% notwendig damit die Kappe genau sitzt und von selbst hält.…
Made this logo with Rexroth branding as i needed some “unique” markers for my bagpack. Coloured version was done on Bambu Lab X1 Carbon.
My remix of Shadow 2 model for AceXR.
Der Adapterdeckel ermöglicht eine saubere und dichte Verbindung zwischen 20 mm Flexrohren und 1,5 Zoll Abflussrohren. Eine kleine Arretierungsrille im Inneren sorgt für sicheren Halt und verhindert das Herausrutschen des Flexrohrs. Ideal…
The corner routing template can be used to route a corner of a shelf precisely, there there is an extrusion profile is placed. You can use a router bit with a bearing to trace the shape of the template to the shelf. The drilling guide is…
When getting a new car I didn't get the FlexRail for my trunk and i'm unable to mount all shopping hooks for Opel Astra K i found online. I made this one to completley skip the expencive FlexRail system - it's screwed directly into rail…
Functional T-Nut M4 Metal (Square Nut) print them solid, with supports
Hey everyone, I needed a corner cap for my 45x45 alu profile corner. The two flaps create a nice friction fit so they dont simply slide off. Print a 45° angle for best surface finish and strength. Let me know if you need a different design.
G-Code na Flexi Rexe připravený rovnou k tisku
Y Splitter für 25mm Flexrohr
We had during summer time a lot off issues because of overheating. So i designed an easy Mounting Fan Housing with 24V DC Fan. Originally that equipment is passivly cooled over Steel Housing. Once printed the cover, I tool a heat gun…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
More info on the discord: https://discord.gg/EBbzWWyGgr This mounting solution allows you to place your Flex Ring Gauge directly in your desk if you're using a wheelbase with a clamp and your desk is more convenient. You'll need 4 M8x12…
Bassreflexrohr 70mm Außendurschmesser / 100mmx100mm Flansch / 200mm hoch
Stimple Bracket to mount MGN12 Linear Rails to 45mm Aluminium Extrusions like these: https://esd.equipment/de/bosch-rexroth-3842990646.html?gclid=Cj0KCQjw6ZOIBhDdARIsAMf8YyHERznxGsH_uA0YVCPRo-cSGVR6q_FXBpu-68oB3GsD2dvgMhSc0EMaAuZQEALw_wcB…
This model is deprecated, please see the new one, which uses 1 piece https://www.printables.com/model/603091-fanatec-mount-for-flex-ring-gauge-fits-56mm-holes- ======= More info on the discord: https://discord.gg/EBbzWWyGgr This model…
This model is deprecated, please see the new one, which uses 1 piece https://www.printables.com/model/603091-fanatec-mount-for-flex-ring-gauge-fits-56mm-holes- ======= More info on the discord: https://discord.gg/EBbzWWyGgr This model…
Print straight up. Set 4 perimeters. No supports needed. Use 2 pieces of M3x10 imbus screws to fix it in position.
UM2 Clone brackets remixed for better fit Bosch Rexroth 2020 extrusion (6mm T-Slots and M6 screws for top and bottom brackets) with additional bracket for round rocker switch for power or LED on/off. I've also included Z-axis motor spacer…
T-type 2040 profile connector with Bosch Rexroth 4040 profile. Use screws: 3 x M4, 1 x M6
Bosch Rexroth 80 x 40 10mm profile with 6.5mm hole I use with relevant 6mm tnut and knob to be able to abut something else I have set into the extrusion and calibrated, thus if I want to remove the other item from the extrusion I can put…
This is the carrier / holder for a Prusa spoolholder arm included in latest printers (I used MK4 leftover arm). Carrier is built to fit Rexroth 4040 profile slot - with a slot nut and M8 screw DIN7991
Two piece clip with 2.2 x 8mm screw for panel on extruded aluminum frame. Best results with nylon based filaments. 100% infil.
Flexible TPU mount for VM275T camera onto the FlexRC Nano-X (16mm stack) Category: R/C Vehicles
Strut brace keeper for the nano X. Use the long screws that come with the 1535 props. print in TPU! Category: R/C Vehicles
450mah (7x17mm) 1S battery mount for FlexRC Nano X drone. Print in TPU, no support. Also check out my camera mount! Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: R/C…
Linear Bearing Block / Housing for 20mm Shaft (Rexroth Compatible) Upgrade your motion system with this custom-designed bearing housing. Specifically engineered for the Rexroth R067XX20xx series, this model bridges the gap between…
Added trivictus pcar to long sunk from Dom's ExBcar Rev 2 to essentially create a SuperBcar - I found the mirrored worked best
Little carrying case for the delicate FlexRC Nano-X Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: R/C Vehicles
Got tired of also having to pull the rear bang bumper and using pliers to remove my foot hooks. These sit perfectly in the void between the rail, battery box, and bang bumper to hold the nylock in place. STEP uploaded for ez mods.
Disclaimer vorne weg: Ich bin kein Experte für den Bau von Anlagen für kontrollierte Wohnraumbelüftung. Alles was ihr druckt und nachbaut macht ihr auf eigene Gefahr. Lüftungssysteme sollten regelmäßig überprüft und gereinigt werden.…
This model contains a construction profile currogated pipe holder. It fits to 40x40mm profiles with 10mm groove. It can take 16, 20 and 25mm pipes. It can be rotated by 45° before tightened to the profile. You need a sliding nut or other…
Einfach nur die klingen einsetzen, einfacher Druck. Es sind 18mm Klingen von einem Cutter-Messer. Man setzt sie so ein wie auf dem Druck abgebildet mit der scharfen Seite zur Öffnung. Die Klinge muss tiefer sitzen als die zwei Führungen…
UM2 Clone brackets remixed for better fit Bosch Rexroth 2020 extrusion (6mm T-Slots and M6 screws for top and bottom brackets) with additional bracket for round rocker switch for power or LED on/off. I've also included Z-axis motor spacer…
Split pack compatible XR Front box. Holds 6s2p 21700 up front in staggered orientation. Has mounts for Buck and WLED module. Uses 19mm 4pin XLR Charge port and Superflux Motor connector. Compatible with stock and aftermarket rails. Uses…
The HexRack Spool Holder is a honeycomb-inspired filament organizer designed for use with a standard 1/2-inch (12.7 mm) wooden dowel. The holder uses a 1/2-inch (12.7 mm) wooden dowel to support each spool, keeping them aligned and easy…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
