1 / 9
Linear Bearing Block / Housing for 20mm Shaft (Rexroth Compatible) — zdjęcie 1
1 / 9

Linear Bearing Block / Housing for 20mm Shaft (Rexroth Compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Whether you are building a heavy-duty plotter, a sliding table, or a custom frame, this housing provides a secure and st

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Linear Bearing Block / Housing for 20mm Shaft (Rexroth Compatible)

Upgrade your motion system with this custom-designed bearing housing. Specifically engineered for the Rexroth R067XX20xx series, this model bridges the gap between high-quality linear motion and standard 30x30 mm aluminum extrusions.

Summary

Whether you are building a heavy-duty plotter, a sliding table, or a custom frame, this housing provides a secure and stable mount for 20mm linear bearings.

Installation Note: The 32mm internal diameter is designed for a press-fit installation. Depending on your printer's calibration, the bearing should fit snugly and stay in place without extra fasteners.

Technical Details:

  • Bearing Fit: 32mm (Press-fit).

  • Part Length: 46mm.

  • Mounting Holes: Sized for M6 bolts.

  • Pro Tip: Use wide (enlarged) washers for the M6 bolts to ensure the best stability on the plastic part.

Recommended Print Settings

To ensure the part can handle the mechanical stresses:

  • Filament: PETG, ASA, or ABS.

  • Perimeters: 4 or more.

  • Infill: 30% Gyroid.

  • Supports: Usually not required, depending on your printer's bridging performance.

Tagi