Liczymy pasujące modele…
This is a model for organizing your electric toothbrush and cable. Or Sockets are over and aside the sink and the cables were rather hangin down and could get wet etc. I mounted it with double sided tape. You can cut the model in your…
Herramienta para pressfit Shimano SM-BB71-41A. Se necesita una varilla de 8mm, tres tuercas y dos arandelas. Imprimir con 4 capas de perímetro y relleno 40%.
Since the original mount for the SunluS1 didn't have an option to mount PTFE tubes, like the eBox, I modified the Hygrometer Mountplate for the SunluS1 and added a simple press fit mount for 4mm bowdentubes. I also added the CAD files so…
I designed this tool based on the measurements of a Shimano Pressfit SM-BB71-41B. It might also work for other models, but I recommend checking the dimensions and making adjustments if needed. You will need few hardware parts: 1x This…
This is very simple plug to bicycle frame with Pressfit BB standard (PF86 in my case but it works with other PF) Hole in the center is for M8 threaded rod. Printed 2 pieces hold my BB tube precisely in position in my own version for…
This is a pressfit PTFE guide for SUNLU filament dryer. It uses a clip / collet to fix the PTFE tube. No drilling and no glueing is needed. Can be used for reverse bowden setup all the way to the extruder so the filament stays enclosed…
Eng: Hello everyone, this is my interpretation of a filament holder specifically designed for the 4-liter cereal boxes. The parts can be easily assembled without any tools (pressfit) and provide a stable solution for the storage and…
A Simple fan adapter that allows 30mm fans to fit in cutouts intended for 40mm fans. Nothing special, just a very simple model. Dimension: Outside: 40x40x10mm Centered Cutout 30.1x30.1x10mm Warning: Screw holes not included.
DIY press for installation of BB86 pressfit bottom brackets You'll need: 2 printed parts M8 threaded rod, 230mm long 3 M8 nuts 2 M8 washers The hole in the printed part is deliberately undersized so you can drill it out, ideally on a…
Made in tinkercad to make a cheap pressfit tool for my Trek Emonda with BB90. Should work with BB86 as well as they have the same inner dimension (untested). Print 2x of each part, then just put them in each side of an M10 threaded rod,…
I decided to remix the original model so i can create any shapes and any sized bases. As Zack's post for printing fits also this on most parts. no need for brims or supports. All storage boxes are compatible with all base plates. Most…
Inspired by : Pressfit Bottom Bracket BB86 Bearing Remover v2 (for 24mm cranks) Print Recommendations: (what worked for me) Special: add pause to insert m8 nut at the last layer before it is covered (was layer 103 for me) [see image]…
This model is a simple but well-designed press-fit box , consisting of: Press-fit box with snap lid in two depths: 100×100×100 mm and small 100×100×50 mm. Box inner size: 95 × 95 mm Lid lip (outer size): 94.8 mm → 0.2 mm clearance fit…
I needed new Humbucker Cover cause mine Broke. these just slide over the Pickups and fit snuck tight. maybe u need to scale up or down for ur pickups. just measure it. i print in PLA - 0,2 nozzle. with textured plate for finish look. no…
This is a holder for Boudewijn Plomp's magnet tubes, based on MrKuenning's design. This holder does not have the Gridfinity base and has the addition of spaces for 8mmx3mm magnets to be pressfit into the base to retain the magnet tubes…
Slim Raspberry Pi Zero W2 Case with places for M2 nuts in the corners.
I wanted a good quick connect but was unable to find one, then i stumbled on the original model and that looked and worked great, only problem is i dont have any of the bowden connections that this model relies on. So i remixed the model…
[EN] To be able to remove the small neodymium magnets from the fridge with bare hands I designed this small housing. Because of the conical design it is very easy to grab the magnets. The tight tolerance keeps the magnet in the housing…
Helinox Chair One Feet Inner Diameter 14mm, Feet Diameter 30mm Material: PETG Walls: 4 perimeters Infill: 100% Pressfit feature I welcome all feedback! I'm eager to see your finished models. Happy printing!
pressfit tool für Shimano bottom-bracket Ultegra use a M8 rod with nuts and washers you have lying around PLA is enough
This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…
I made this to press fit close the snowball press instead of the other thing, (This might need to be put in a wrench for press fitting) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2…
Assembly: Just put the Blade in from the side und close it with the plug. Alternatively you mount it with a M3 srew. Be sure to cut the insulation with a rotary movement. Then it can be effortlessly stripped. Printsettings: Material: PLA…
NEW VERSION (Now with optional 6x3 press-fit magnets so it doesn't fall off the spooler when loading, and an extended version for spools that are a little wider) I redesigned this specifically for the dual filament holder that I made from…
used this for a 30mm crank and it worked perfectly. will work with cinch or dub cranks.
Cable Chain Nema 17 Mount for the 3018. Glue in the magnets and simply press onto the motor. You need 4 8x2.65 or thinner Neodyn Magnets
Mount for the rear Y endstop of the 3018 CNC. Is PressFit but 4 8x2.65 neodyn magnets also hold it
I dislike arm protections that fixate the protection with the motor screws so i designed my own one for the aos5v2 as pressfit, tight and easy to install :)…
made to be pressfit screws are passthrough so tpu is not inbetween the screw and the arm.
A Quick Socket cover for those ugly sealing lamp outlets. No Supports Scalable Pressfit (Current model is for 70mm holes)
put a small drop of household oil on top of the shaft then slowly turn the screw make sure the screw is hitting the shaft and not the pulley. Requires one of the Enders long m5 and a nut. Print PLA, hot, with many walls and good 3d infill…
I noticed that that i often have more half empty spools than full laying around. Also i wanted to recicle some spools. No screws requiered if you print in one piece. If you plit it, you would need to glue or screw it with the provided m3…
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
This is a modification of the LTT Screwdriver Case Bit Holder (8x3mm magnet version) from https://www.printables.com/model/372998-ltt-screwdriver-case. I found that with my Voron 2.4 using a klicky probe (which has strong magnets for…
Made specifically for the Raceface PF30 bottom bracket, but will certainly work with other PF30 BB's. Bearing removal still in progress! but you can use a disassembly cup to remove the bearings from the pulled out bottom bracket shells.…
Given the recent innovation of bearing SCARs, I decided to hop on the bandwagon. If I understand correctly, SCAR = String Centering And Rifling Bearings are pretty expensive though, so misusing rivets seemed like a reasonable solution for…
Hey, today only a small upgrade. I didnt like the loose "handle" for the Calibration pin, so i designed one with better grip and pressfit. The new one has a nice pressfit, just enough to not get loose. Also i gave it groove for more…
This is an old design that I imported from my prints on Thingiverse. This is a remix from the parts needed to install a bottom bracked from https://www.thingiverse.com/thing:2303747 I made this to install a Sram GXP pressfit bottom…
This is a model for organizing your electric toothbrush and cable. Or Sockets are over and aside the sink and the cables were rather hangin down and could get wet etc. I mounted it with double sided tape. You can cut the model in your…
Tweezers for inserting q-tip/cotton swabs into. Cut off the ends and insert into the tweezer. We use these for cleaning fiberoptics, dipping them in alcohol then wiping clean the fiber.
Why replace the entire idler for about $6 USD when you can buy a pack of ten (10) new bearings for about $10 USD and replace the bearing in the idler for $1 USD each time. This is setup for a Prusa i3 MK3/S's smooth idlers on the X and Y…
Pressfit bin for the lumenpnp machine
![Pressfit Bottom Bracket BB86 Removal tool [FSA 19mm Shaft]](https://media.printables.com/media/prints/03aefcfd-29fe-4657-ab3e-1add29cf3a4c/images/10604532_c0abf9fb-9d32-4254-852c-d808dd6a86d8_30c5514b-8022-43e7-9996-b3050ec2c84e/bike_hammer_render_2.png)
![Lamp Socket Cover [Fastest+Pressfit]](https://media.printables.com/media/prints/407879/images/3391204_fbb733e9-8c73-41d1-b2e3-58cc6b50e13a/img_20230224_145600-1.jpg)
