Linear Bearing Block / Housing for 20mm Shaft (Rexroth Compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Whether you are building a heavy-duty plotter, a sliding table, or a custom frame, this housing provides a secure and st
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Linear Bearing Block / Housing for 20mm Shaft (Rexroth Compatible)
Upgrade your motion system with this custom-designed bearing housing. Specifically engineered for the Rexroth R067XX20xx series, this model bridges the gap between high-quality linear motion and standard 30x30 mm aluminum extrusions.
Summary
Whether you are building a heavy-duty plotter, a sliding table, or a custom frame, this housing provides a secure and stable mount for 20mm linear bearings.
Installation Note: The 32mm internal diameter is designed for a press-fit installation. Depending on your printer's calibration, the bearing should fit snugly and stay in place without extra fasteners.
Technical Details:
Bearing Fit: 32mm (Press-fit).
Part Length: 46mm.
Mounting Holes: Sized for M6 bolts.
Pro Tip: Use wide (enlarged) washers for the M6 bolts to ensure the best stability on the plastic part.
Recommended Print Settings
To ensure the part can handle the mechanical stresses:
Filament: PETG, ASA, or ABS.
Perimeters: 4 or more.
Infill: 30% Gyroid.
Supports: Usually not required, depending on your printer's bridging performance.