Search results: engineering

Counting matching models…

Printables

Gridfinity Holder for Slice Engineering's Plastic Repellent Paint

Printed in PLA with no special changes to the standard settings.

Printables

Prusa I3 MK3S+ Mosquito Upgrade Extruder Body and Cover as Received from Slice Engineering

The ASA printed parts I received from Slice Engineering, with the Prusa I3 MK3S+ Mosquito Upgrade kit, are slightly different from the original parts, as designed by WickedTwister. The rectangular opening, just above the heater block,…

Order a print of this model

Printables

Engineering Flowchart

A small redesign of the engineering meme. Saw the design on the internet, but there you had to pay for the .dxf files, so I thought that I should create my own version for free. You only need 4 some small srews for the wall if you want to…

Order a print of this model

Printables

ULTIMATE V1 ENGINEERING TUBE CAP

DESCRIPTION Thank-you to Ryan @V1Engineering for his incredible support, and of course for allowing the use of these logos! This started as a joke. It was around halloween time and I thought it might be cool to project a V1 logo onto my…

Order a print of this model

Printables

Audit Game Process Engineering

Order a print of this model

Printables

Vision Engineering / Mantis Elite . Lens Changer Holder

Monture de remplacement pour Mantis Elite Version 2 Reference fabriquant 202-B0445 Vision Engineering Cette pièce est une substitution au modèle d'origine. Paramètres d’impression 3D : Impression facile avec support (voir images), en PETG…

Order a print of this model

Printables

Engineering Square - 3 Options

Warning These files has many parts and take time to load and slice. I have attempted to make it as easy as possible to lay out and print. Options No slider guide Inner slider guide Outer slider guide The engineering squire guide positions…

Order a print of this model

Printables

OpenScad Engineering Squire Set - Part 1 The Ruler

Introduction to the ruler A ruler is such a basic daily thing that I barely give it a second thought as did I starting this project making a basic ruler to build upon. This is so much harder than I anticipated. OpenScad facilitates a…

Order a print of this model

Printables

Engineering Squire Set - Part 2 Centre Finder

This is the first attempt to make an easy 3D printable centre finder tool using the flat 3D printed ruler design. Design Iterations Revision Comment v1 This locking mechanism needs refinement. It's not perfect and needs improvement to…

Order a print of this model

Printables

mechanical engineering

This model demonstrates different hinge types and gear types and springs and spiral

Order a print of this model

Printables

Teenage Engineering K.O. 2 EP-133 - Fader knob SLIM

SLIM and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…

Order a print of this model

Printables

Slice Engineering Mako FIN Gammamaster Nozzle Holder

As you can see in the second image, you'll need to tell your slicer to stop and insert four 4x2mm magnets to hold the bits in place. Very simple. I included the STEP file so you can alter the text or reshape it to fit something like…

Order a print of this model

Printables

Engineering Tag (good for benchmarks)

Yea plz support me

Order a print of this model

Printables

Jackpot3 Case for V1 Engineering Lowrider 3

I wanted to upgrade my Lowrider v3 to a Jackpot 3 controller but could not find a case I liked, so here is a remix of one of design8studio' s excellent designs. The three main differences from the original are: It's for the Jackpot3!…

Order a print of this model

Printables

Engineering Square

A simple engineering square with measurements up to 5cm.

Order a print of this model

Printables

Engineering Quick Tool: Free Body Diagram

Inspired by Jan Štech and their Template For Electrical Diagrams , I have made a similar design to print for creating consistent Free Body Diagrams, as well as consistent Beams for strengths. Designed to be printed at a .2mm layer height.…

Order a print of this model

Printables

Template for engineering diagram

Miniature template for drawing engineering diagram

Order a print of this model

Printables

RPi 5 mount for Engineering fixture plate

To mount your raspberry pi 5 to the Engineering fixture plate as seen below: There are two versions. One with holes for just screwing in m3 screws directly in to plastic, and 1 version to fit CNC Kitchens inserts which has “(insert)” in…

Order a print of this model

Printables

Lattepanda 3 Delta mount for Engineering fixture plate

Order a print of this model

Printables

Magnetic Shelf for Teenage Engineering KO II EP-133 / EP-1320

This is a modified version of @AlastairGreen_326352 's KO II Shelf to take magnets. I wanted to be able to mount it on the side of my server rack which is metal. It works great and has more than enough magnets to hold it. I also put some…

Order a print of this model

Printables

Teenage Engineering Computer-1 Case Mod Plates

Having bought this case I was immediately disappointed by the lack of core functionality. This case in its stock configuration is an oven for your computer components, the GPU is starved for air, as is the CPU. So I designed these…

Order a print of this model

Printables

teenage engineering EP-133 K.O. II EP-1320 Medieval Keycap

A replacement keycap for the teenage engineering EP-133 and EP-1320 sampler.

Order a print of this model

Printables

Gridfinity Architectural/Engineering Ruler Holder

A couple of Gridfinity modules to hold rulers. Specifically, both normal rulers and 3-sided architectural/engineering rulers. The 1x1 holds one 3-sided and one normal ruler. The 1x2 hold two of each. Both are 3 units tall. I recommend…

Order a print of this model

Printables

Engineering Square Case - Moore and Wright - 150mm

Simple case to keep the square protected when not in use

Order a print of this model

Printables

Engineering Graphics Freehand Sketch Design

This collection of STL and STEP files offers a variety of engineering graphics-related objects, all created through freehand sketching. These files are ideal for those interested in 3D printing models for educational purposes, design…

Order a print of this model

Printables

Gridfinity - Slice Engineering Nozzle Torque Wrench, Bit Holder, and Nozzles

Remix of Nozzle Torque Wrench & Bit Holder Gridfinity by crealitycheck. Lowered bin height and added nozzle holder(s).

Order a print of this model

Printables

CRS SIM Engineering Clutch Paddle

Repair part for FX Carbon steering wheel clutch paddle. PETG print, supports required, layer 0.5-1 mm

Order a print of this model

Printables

Engineering Stick™

"Have you tried poking it with a stick?" They ask. "No, I have not tried poking it with a stick" I reply. Not for the lack of thought for doing so, but because I simply do not have a suitable stick. That is of course until now! The…

Order a print of this model

Printables

Electrical engineering ruler

A simple design that I made in a while of my time. My idea is to make a more complete rule to help me with the diagrams that I have to make in the subject. I hope it can serve you as well as it did me.

Order a print of this model

Printables

RC Tank, Engineering School IOT Project

Remote-Controlled Tank Transform your ideas into reality with this advanced remote-controlled tank model. Designed with multiple electronic modules, including a Raspberry Pi and a laser, this tank provides endless possibilities for…

Order a print of this model

Printables

Teenage Engineering EP-133 KO II Stand

Stand is 2 models, 5 prints. It utilizes m4 hardware. So you will need M4x6mm flat head screws and I used M4 heat inserts 6mm diameter and 4mm long. You can add rubber bumpers as needed but it has been working fine for me without any.

Order a print of this model

Printables

Kraftwagen: Age of Engineering Minimalist Organizer

Minimalist tile organizer for Kraftwagen : Age of Engineering (2024 version) Print settings to maximize speed and minimize filament use: Wall Thickness: 1.2mm Top layers: 0 Bottom layers: 0 Infill: 20% Infill pattern: Zig Zag (or your…

Order a print of this model

Printables

Gridfinity Holder for Slice Engineering's Plastic Repellent Paint

Printed in PLA with no special changes to the standard settings.

Order a print of this model

Printables

Gilbert Engineering Fuzion Mount v2

EMT Mount for the Gilbert Engineering Fuzion. This is a second version of the Fuzion mount that I have created. It uses the traditional + center mount vs the H design of the other mount. Perimeters are your friend for strength in mounts.…

Order a print of this model

Printables

Gilbert Engineering - Spiral Tree Stand | 20mm electrical installation pipe

This are parts for the GE spiral mini tree. It's designed to use 20mm electrical pipes (e.g. https://www.obi.at/leerrohre/isolierrohr-starr-en-20-laenge-2-m/p/1846310 ) I cutted the 2 meter pipe in the following dimensions: > 25 cm for…

Order a print of this model

Printables

V1engineering - Lowrider v4 - Y_belt_minf - Adjustable

Just a small modification.

Order a print of this model

Printables

Teenage Engineering OP-1 | OP-1F | OP-XY Stand

Stand for the Teenage Engineering “OP” line of synths. Works on a desk or in your lap, and is designed for use with: OP-1 OP-1 Field OP-XY (retains access to the pitch bend controller) The minimum angle is 20º and supports larger angles…

Order a print of this model

Printables

Hula Adaptor Feet for Annex Engineering K3

I use the HULA for Voron anti vibration feet on my Voron and my Bambu X1C. Unfortunately there was no way to use it on my K3 printer. So I mashed this together to replace the existing feet attachment parts on the K3. You will need some…

Order a print of this model

Printables

Prusa I3 MK3S+ Mosquito Upgrade Extruder Body and Cover as Received from Slice Engineering

Order a print of this model

Printables

Pedal Riser for Mission Engineering SP-1

I purchased a Mission Engineering SP-1-ND expression pedal. When I went to go mount it on my pedalboard, I discovered that an additional accessory was needed to do this. Not wanting to wait another week for this to arrive, I designed my…

Order a print of this model

Printables

Skadis Slice Engineering Plastic Repellent Paint Mount

Support needed

Order a print of this model

Printables

Teenage Engineering OP-1 Field and OP-XY dual performance stand

I originally printed these on a Prusa i3Mk3s+ using PET-G at 30, draft mode, with 25% infill (Support cubic). You can try printing at 15 or 20 detail mode, as you like. (It's a pretty big print, so draft works fine imho.) Designed in…

Order a print of this model

Printables

Cable box, reengineering of Ikea Sätting

The Ikea Sätting cable organiser is practical, but too big for the power strip I am using. Also not high enough for the chargers I have when plugged in the power strip. So I redesigned the box. The cover for the side cable inlet can be…

Order a print of this model

Printables

Gilbert Engineering Yai Yai Mounts

GE Yai Yai Flake Mounts and Supports. You will need a large format printer to print this. I used a Prusa XL. The widest center mount section is 350mm wide. The bottom piece is 394mm wide but is put on the bed diagonally. Perimeters are…

Order a print of this model

Printables

Pokornyi Engineering F499 6 Paddle Mod

A set of modded shifters and drill guides to allow the installation of 2 additional paddles to the PE F499 wheel

Order a print of this model

Printables

DJI O4 Camera Mount for Fractal Engineering Frame

Order a print of this model

Printables

JayS Engineering Logo Coaster (100mm)

Coaster with several color changes over height to create a colored logo coaster. Diameter is 100mm. If other diameters are required, please let me know in the comments.

Order a print of this model

Printables

HSW Slice Engineering Plastic Repellent Paint Mount

This is a simple peg and normal insert mount for Slice Engineering Plastic Repellent Paint to be used with HSW. I took a design by @maramao that was made for Skadis walls and added a HSW peg to it instead.

Order a print of this model

Printables

Engineering Kiosk Podcast Untersetzer

Ein stylischer Untersetzer als Merchandise Artikel des Engineering Kiosk Podcasts. https://engineeringkiosk.dev/ Filament: Eryone PETG Black Eryone PETG Orange

Order a print of this model

Printables

Teenage Engineering Pocket Operator Case

Background I was fed up with my naked Pocket Operators (PO) combined with my awful storage approach. This case meets my own needs. Specifically, the following requirements: It must use the existing metal stand that comes with each Pocket…

Order a print of this model

Printables

Teenage Engineering OP-1 travel hard case | DJ audio accessory

A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…

Order a print of this model

Printables

15x11mm CRude Engineering Sugar Cube Speaker Baffles

3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!

Order a print of this model

Printables

Biomedical Engineering

A design incorporating the caduceus and a gear to symbolize the joining of medical science and engineering.

Order a print of this model

Printables

Hose adapter for v1 engineering lowrider makita dustshoe

I printed it in ppcf and it turned out very nice. It's a really basic piece just a tube that wedges into the dustshoe.

Order a print of this model

Printables

Teenage Engineering OP-Z Case

The case is designed to utilize the foam from the original OP-Z packaging. Hopefully, you’re a bit of a hoarder and save your gear boxes like me. I printed some thin shims to fit between the foam and the side wall, making the OP-Z a bit…

Order a print of this model

Printables

Teenage Engineering Pocket Operator Case

hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…

Order a print of this model

Printables

Vision Engineering Elite to OG Objective Adapter

This is a simple adapter ring for vision engineering Mantis scopes to be used with the newer “elite” lens.

Order a print of this model

Printables

Adapter to fit Slice engineering Copperhead with Screw mount heatsink to LGX Lite

required: 2 M2.5 x 12mm Countersunk screws 4 M3 x 8mm Countersunk screws 32mm Ptfe tube Should be able to print with FDM but i designed it for Resin printers or SLS. I designed this to use on my seckit sk tank

Order a print of this model

Printables

Teenage Engineering OP-Z to DJ Controller adapter

I started getting interested in DJing, but didn't want to invest into a proper controller right away, so I looked for something that I already own and could be (at least) temporarily repurposed to be able to experiment with. I realized…

Order a print of this model

Printables

Benchy Engineering Card

A benchy helper to give you the major measurements your benchy's should have when printed I have split the original bency up and attached it to a plate so it can be hung on a wall. The plate has the major benchy measurements on it so you…

Order a print of this model

Printables

Gilbert Engineering Upright Singing Bulbs 46" Half bracket

Gilbert Engineering Upright Singing Bulbs 46" Medium Cut in half to have one side for single pole mount.

Order a print of this model

Printables

Vision Engineering Mantis Microscope stand using 3/4" pipe

Replacement stand for a Vision Engineering Mantis Microscope making use of a ¾" gas pipe and nipple mounted through the desk Additional hardware required: ¾" wood drill to go through desk ¾" Iron pipe DN20…

Order a print of this model

Printables

engineering beads for your hoodie

Long ago I was wondering what would be the best sign of the mechanical engineering. Everywhere in this field you can see some many bolts, nuts, parts of machines etc. But I think that the cogwheel is the best description of this…

Order a print of this model

Printables

Egg-Buddy Remix, original by MC Engineering

strengthened arms for stability, added hole in center of egg and screw top to allow egg to hold candy

Order a print of this model

Printables

KW/Racecomp Engineering GR86/BRZ Coilover Spring Perch Retainer

Why? KW and RCE coilovers composite lower spring perch and use a steel set screw to keep them in place. The problem is it's easy to strip the threads in the perch since the composite material is much softer than the steel set screw. Some…

Order a print of this model

Printables

V-Core 3.1 BRS Engineering CPAP Back Plate Cover

This V-Core 3.1 BRS Back Plate Cover for people using the BRS Engineering’s CPAP backplate, specifically for those utilizing either standard motor mounts or PMB mounts, instead of the BRS Tensioner Lever M2. This basically covers the…

Order a print of this model

Printables

Star Trek TNG engineering / medical device

A 3D model based on the modular handheld device seen in Star Trek: The Next Generation (notably used by Dr. Pulaski in "Unnatural Selection"). Separate parts for easy color match. Perfect for cosplay, display, or as part of a TNG…

Order a print of this model

Printables

Teenage Engineering K.O. II 2 Speaker Grill

This model is designed to replace the speaker grill on the KOII portable sampler manufactured by Teenage Engineering. I am particularly fond of the orange accents on the machine and sought to replicate them. I printed this component using…

Order a print of this model

Printables

Teenage Engineering K.O. II 2 Battery Cover

This model is designed to replace the battery cover on the KOII portable sampler manufactured by Teenage Engineering. I am particularly fond of the orange accents on the machine and sought to replicate them. I printed this component using…

Order a print of this model

Printables

HSW Slice Engineering Plastic Repellent Paint Mount - Bottom Peg

I really liked @Infamous_809019's original model, but prefer to not have to print supports. The slice bottle seemed like it wouldn't be too heavy, so I tried printing it with the peg at the base. Seems to work well. Same print settings as…

Order a print of this model

Printables

Engineering Journal Pencil Clip

I really like the feel of using a pencil and my handwriting is better when I use a 0.5mm mechanical pencil. Given that I need to go back a read what I write in my engineering notebook, I spent a bit extra to get a really nice Kaweco…

Order a print of this model

Printables

Laser Fence Storage Tray for the set sold by Blackwell Engineering

Laser Fence Storage Tray for the set sold by Blackwell Engineering . A simple storage tray to keep your fence set handy.

Order a print of this model

Printables

Slice Engineering Mako Hotend air dam for BambuLab

This an stl model of the air dam for the Slice Engineering Mako Hotend for BambuLab printers

Order a print of this model

Printables

Engineering Award 2025-2026

The award is a trophy for the Engineering Award 2025-2026!

Order a print of this model

Printables

Teenage Engineering K.O. 2 EP-133 - Fader knob

small and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…

Order a print of this model

Printables

Shrinkage Calculator - Dimensional Calibration Tool v10 (update of remix by ap.engineering)

Please refer to AP.Engineering page Shrinkage Calculator for how to use it and the very important spreadsheet. The reason for the re-mix is for some minor issues I had with setting up an imperfect CoreXY (Voron2.4r2) that left behind an…

Order a print of this model

Printables

Engineering Square

Various versions of a simple engineering square used to mark and measure along right angles. V1 has no measurements

Order a print of this model

Printables

Linhof 617s III mount Reverse Engineering

for design reference update250902 small changes for cable release

Order a print of this model

Printables

Vision engineering mantis bulb covers

These were printed from petg, maybe resin would be better, but i did print 0.1mm layers, so the "lens" gets two layers, you should dry your filament and print really slowly the first two layers. You might need to trim the right side panel…

Order a print of this model

Printables

Groz 4" Engineering Square Case with Lid

Needed a case for my Groz 4" Engineering Square cause the box it came it was getting old and nasty. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Tool Holders & Boxes

Order a print of this model

Printables

McMaster University Engineering Fireball logo

Fireball logo for the Faculty of Engineering of McMaster University. Looks best with Concentric layer pattern.I printed in yellow/gold color, then used red permanent marker on top layer and edges. Check out my other McMaster University…

Order a print of this model

Printables

GRIDFINITY MACHINIST ENGINEERING MEASURING TOOLS ORGANIZER

Designeed in fusion 360 using the gridfinity design to organize various measuring tools as shown in the photos. Dimensions are included in the photos and are in mm. Clamp shown in photos is a 12-inch scale clamp 3d printed. Text is raised…

Order a print of this model

Printables

Engineering Flowchart

Order a print of this model

Printables

24-Tooth Gear – Precision 3D Printed Mechanical Part for Robotics, Engineering, Prototyping and DIY Projects

This 24-tooth spur gear is a precision-modeled, 3D printed mechanical component designed for robotics, engineering projects, and prototyping applications. With clean, accurate tooth geometry and a solid center for maximum strength, it’s…

Order a print of this model

Printables

McMaster University Engineering Iron Ring Display Monument Replicas

This being the 100th 3D model I am uploading here I wanted it to be a little special. As my own personal way to commemorate 100 years of Canadian Iron Ring tradition, I created loose replicas of the McMaster Iron Ring monument that have…

Order a print of this model

Printables

PARAMETRIC TUBE END CAPS WITH V1 ENGINEERING LOGO

Thank-you to Ryan @V1Engineering for his incredible support, and of course for allowing the use of these logos! These simple to print models have only three parameters and can be easily scaled, or modified using the original Onshape…

Order a print of this model

Printables

ULTIMATE V1 ENGINEERING TUBE CAP

Order a print of this model

Printables

AKR ENGINEERING DESIGNS 3D PRINTING - MARUTI 800. PH:9961443300

IT'S A DETAILED AND SINGLE PIECE BODY WITH AXLE ATTATCHED. MODIFICATION ON WHEELS REQUIRED. FOR ANY QUERRIES OR ORDERS YOU CAN CONTACT ME ON WHATSAPP - 9961443300

Order a print of this model

Printables

AKR ENGINEERING DESIGNS 3D PRINTED TWO STOREY HOUSE DETAILED MINIATURE PH:9961443300

AKR ENGINEERING DESIGNS 3D PRINTING TWO STOREY HOUSE DETAILED MINIATURE PH:9961443300. CREALITY ENDER 3 OR OTHER PRINTER

Order a print of this model

Printables

AKR ENGINEERING DESIGNS 3D PRINTED DOORS AND WINDOWS DESIGN. PH:9961443300

AKR ENGINEERING DESIGNS 3D PRINTED DOORS AND WINDOWS DESIGN. PH:9961443300.

Order a print of this model

Printables

TMC5160T Plus 4x Bracket for Annex Engineering Gasherbrum-K3

I'm running the XY motors on my Annex Engineering K3 at 48V, and I'm using BTT's external TMC 5160s (TMC5160T Plus) as the stepper drivers. I needed to mount them, and specifically, I needed enough room for an Octopus Pro (mounted…

Order a print of this model

Printables

Spare wheel for Arduino Engineering Kit Rev2 (ROVER)

Spare Wheel for Arduino Engineering Kit Rev2 Rover (Rubber Band Ready) A replacement or spare wheel designed for the Arduino Engineering Kit Rev2 rover. This version has a modified rim profile to securely fit a common standard rubber band…

Order a print of this model

Printables

Gilbert Engineering Upright Singing Bulbs 46" Medium

Mount for the Gilbert Engineering Upright Singing Bulbs 46" Medium. Designed for 1/2" EMT. Works with many other props like IMPRESSION North Pole sign with Matrix. Category: Other

Order a print of this model

Printables

Gilbert Engineering XLS450 Flake 46" Mounts

Mounts for the Gilbert Engineering XLS450 Flake 46" Mounts. This uses 1/2" EMT. If using the center mount, print two There are mounts for the right and left side bottom and upper. You could use these without the center or with. If using…

Order a print of this model

Printables

Gilbert Engineering Rosa Grande Mount

Mount system for the Gilbert Engineering Rosa Grande. Uses 1/2" EMT with holes to use a self tapping screw into the EMT. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…

Order a print of this model

Printables

Gilbert Engineering Square Peg Mount

Mount for the Gilbert Engineering Square Peg prop. This will work in several positions. Hole size is for 1/2" EMT. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusament…

Order a print of this model

Printables

Gilbert Engineering 46-270 Slit Supports

These are supports for slit cut Gilbert Engineering 46-270 Star. There are two different supports that you can print twice to cover both sides. Use both supports or pick one based on your preference. Category: Other

Order a print of this model

Printables

Gilbert Engineering BOAW Slit Support

This is a Gilbert Engineering BOAW Slit Support. Print 2, one for each side. Category: Other

Order a print of this model

Printables

Gilbert Engineering 46-460 Star Slit Support

This is for the Gilbert Engineering 46-460 Star. They are additional supports when you get the star shipped to you slit. The normal additional pole support will give final rigidity. Two separate mounts and each mount can be used on both…

Order a print of this model

Printables

Gilbert Engineering Candy Cane 5' Mount (newer 2025)

Note: GE has at least two versions of 5' canes. Canes I bought in 2025 are skinnier. These mounts are for the newer skinnier 5' Cane. I have another mount posted for the wider cane. The skinnier canes are about 167mm wide. A EMT mount for…

Order a print of this model