Mission Engineering Expression Pedal Flate Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple print that is a replaceable base for a Mission Engineering Expression Pedal.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 123
- Makes
- 0
- Views
- 533
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A flat replacement base plate for a Mission Engineering expression pedal. You can use the factory screws, as I've made insets and the plate thick enough to allow them to be used.
There are 3 files, for 2 different prints:
If you have a bed that can handle it, there is a “One Large Piece” STL. This can fit at an angle on a Bambu X1C
If you have a smaller bed, I've split it into 2 pieces as well. There will be a small gap between the 2 pieces, as I trimmed them slightly short when I split it to account for any tolerence deviations in your walls/printer.
No supports needed for any of the prints!
If you dont have a printer, I sell these pretty cheap on my website too: https://pedalnetics.com/product/mission-expression-pedal-flat-plate/