Mission Engineering Expression Pedal Flate Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple print that is a replaceable base for a Mission Engineering Expression Pedal.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A flat replacement base plate for a Mission Engineering expression pedal. You can use the factory screws, as I've made insets and the plate thick enough to allow them to be used.
There are 3 files, for 2 different prints:
If you have a bed that can handle it, there is a “One Large Piece” STL. This can fit at an angle on a Bambu X1C
If you have a smaller bed, I've split it into 2 pieces as well. There will be a small gap between the 2 pieces, as I trimmed them slightly short when I split it to account for any tolerence deviations in your walls/printer.
No supports needed for any of the prints!
If you dont have a printer, I sell these pretty cheap on my website too: https://pedalnetics.com/product/mission-expression-pedal-flat-plate/