Counting matching models…
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
I designed this scratch plate as a direct replacement to the original one. The original plate was scanned in 2d then imported into CAD where it was made into this design. This is in 2 pieces for the ability to fit onto a print bed - the…
Simple rear fender for Onsra Velar. Replaces existing belt covers. Update: 1000km later and these are still in place. I printed with just simple PLA with low infill. Something broke loose in one of the fenders inside in the infill but it…
I used carbon fiber petg and 4 perimeters at 50% infill, but you can use any outdoor safe filament you want (it will be holding very little weight). it is a permanent mod so maybe sleep on it before committing.
Mini fenders that are compatible with TFLs droptop fender for XR. https://thefloatlife.com/products/drop-top-fender-top-only-gt Works with straight rails as is, but you can use the adapter TFL provides to make it work with non-straight…
I made these bushings to lock the stock bridge of my Squier Mustang Classic Vibe when I hardtailed the Tremolo. I've seen people use electrical tape and that didn't seem as sturdy so I made these bushings. They are slightly tapered since…
This is a remix from link below. I liked the way the Sur-Ron front fender looked also didn't feel like spending $30 on the mx350 plastic, so I resized it to fit the mx350 and added a hole for the bolt. I made two my first attempt came out…
Spesso si usura molto facile così ne ho creato una copia con l'occhiello più grande e più spesso per prevenire l'usura.
Imagine you are 3 hours into a 3D model design you haven't saved yet (I know…) and suddenly your beloved Fluffy hops up on top of your PC and pushes the power button with her pretty pink paws. All of that work down the drain. If it…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Additional mudguard/fender on my "Fully" to protect the rear suspension and the drinking Bottle I use it on my Giant Stance E+ 2024, the Insert is TPU to fill the space between Fender and Bike and protect the Paint. For mounting I used…
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time. The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and…
General Description: L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer. The body sits on my custom SCX10 chassis. You can also find it here on Printables. Parts description -…
The front and rear fenders are the same, and the rear mud flap is unchanged from the original. The front mudflap is cut away to make room for the bend in the X7 rails. If mounted on X10, flat or other rails, you can use the rear mudflap…
RC SCALE EXPEDITION OFFROAD TRAILER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. 002_Axle_A can be reinforced by…
Print fenders in ABS or PETG, Mud guards best printed in TPU. Use your own judgement for infil. This will only work on rails with same footpad angle and distance as X7. Really probably only the X7. Definitely won't work on X10 Tested this…
INTRO Meet the DEFENDER; A tanked UGV. Measuring: 890x740x660mm ( LxWxH ), & powered by 2 BLDC drills; This completely 3D printed ( with the exception of the 2040 extrusions for structural support ) UGV can handle whatever you throw at…
This design comes in two versions. The story behind it: Originally I designed the fender extension to have that rounded trailing edge. However my first print ran into a little problem and the parts were cut off a couple of millimeters…
I printed it in pla, seems to be holding up pretty good so far. Not sure what size the fenders are, but they are about 5.4 cm wide at the widest point. (I have 700x35c tires, and could probably go bigger).
The model consists of 7 pieces: 2 mini fenders 1 drop top 4 little connection pieces I recommend printing the mini fenders in TPU, with 5-6 walls and 15 gyroid infill for a good mix between stiffness and impact strength. (my PETG…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
Mini fender, mud guard, and DTF base piece, all in one! For X10 rail angles with BTG tire. Fits both the raised and lowered rail positions with the TFL Thundercat BTG tire. Larger tires or offset (raised AND lowered position) may require…
Windscreen demister with wider vent opening allowing for better air flow and outlets for side window demister vents. Also includes outlets that can be used for side windows. To connect output to side windows needs 20mm ID flexible pipe.…
Mini fender, mud guard, and DTF base piece, all in one! For X7 rail angles with 11in tire, Fits both the raised and lowered rail positions. Larger tires or offset (raised AND lowered position) may require modification to the riser. This…
H0 scale resin model kit of the LR 110, scaleable to other scales. I hope you enjoy building it!
Complete Onewheel TFL compatible drop top fender for funwheel X7 (or onewheel XR). The top fender didn't actually fit on my Bambu lab P2S. I printed it on its side on supports and used Bambu Studio to cut the ends off. It won't harm…
This is a small tray to fit in the top of the center console of a 2020 or newer Land Rover Defender (without the fridge option) to provide easy access storage. It is a tight fit needs sanding around the top lip and deburring to make it…
I couldn't find a good template for routing a mustang vibrato, so I whipped this up. Also has the locations for the bridge thimbles. (just a note about thimbles, these are based on stock thimbles, if installing a mastery they will need to…
Fender for balloon race car to prevent the balloon from hitting the tires. Print 2 and glue them on. I printed them standing with supports.
just print and tap with your bike's spoke threads, and attach. easy peasy
Designed to fit my beautiful Fender Player Plus Precision Bass guitar without drilling any holes. It uses the scratch plate holes and hovers above the top screw of the precision pickup. Note the two holes are 103.5mm apart, and it is the…
Mount for holding Magsafe phone charger to Defender TD5 dash, uses two bolts to bolt through the dash top panel. Fits an iPhone 12 Pro using the charger linked below.…
TRX-4 Defender Sandboard w/ Holder to the Rollcage Remix of these two together: Sandboard: https://www.thingiverse.com/thing:4844876 Holder: https://www.thingiverse.com/thing:3278360 will post better pictures soon
The stock SKS adapter only allows two tilt positions , which makes it impossible to sufficiently raise the rear section of the fender. This becomes an issue when using wider tires or when additional clearance is needed for suspension…
Mudguards Mudguards for the Floatwheel ADV/Pro with BTG tire. I haven't tested them on ADV2 (it has different motor plug) but it should fit coz apparently ADV1 has chunkier motor plug anyway (but better check). Can fit Onewheel Threaded…
Interior lighting for Land Rover Defender requires an LED strip, which can be found in electronics stores. Made of PP material, due to its flexibility, the model may contain flaws in measurements or design. Installation is at your own risk.
Design Concept The Low-Poly Defender of Love is a stylized sculpture representing love and strength, ideal for Valentine's Day displays or gifts. Usage This model can serve as a decorative piece or gift for a loved one during Valentine's,…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
Can be mounted to the fork with two zip ties. Maybe add double sided foam tape between fork and holder to reduce ingress of dirt. Needs a M5 nut for mounting the Fender struts. Was printed in simple PLA.
I printed the latch with PETG. I printed it on its side to give the layer line orientation the greatest strength at 30% infill 6 perimeters. GCODE with those settings attached.
Boat fender clip for hanging a fender on the guard rail (25 mm or 1 inch pipe). Remember to tie a knot on the line after you thread it through the hole. Category: Sport & Outdoors
Tuttio Short Rear Fender – Low Profile Tail Tidy This is a clean, low-profile short rear fender designed specifically for the Tuttio electric dirt bike. The goal of this design was simple: tighten up the rear end, remove the bulky stock…
THIS IS AN OLD MODEL AND MAY NOT BE PERFECT. DESIGNED 100% BY ME. This is an independently designed aftermarket part and is not affiliated with or endorsed by Electro & Co. ETM RTR Rear Fender – Clean Tail Tidy Mod This is a low-profile…
The best quality miniatures are usually resin printed for size purposes, but it is possible to FDM print, it just might be weak and low detail. It is intended as a humanoid steel defender for the Battle smith artificer subclass in D&D,…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Keep mud out. Also has a small cutout to wire a magnet sensor.
Made from TPU this allows it to push into original hole and grip bulb holder. Do not use 5w bulb keep to original max 3w
Recent Woom bike fenders are not compatible with FollowMe bike carrier axes. Here is a fix.
Front axle for Bruder Land Rover Defender This is a drop in Replacement. A little more sturdy than "Stock"
I designed these fenders to fit a Zuca EZ-cart though they should also fit Zuca's LG backpack and Transit carts. Notes: All printed parts were printed in PETG with organic supports on over 30 degrees overhang and 25% infill. I designed…
Created this mount for increased splashwater-protection as the original mounting situtation for the fender did not provide enough. This will hold the fender just above the tire as it is held down on the movable part of the fork and will…
I printed it in PETG but it crackt at the walls on the side from it goes on the shaft i was riding on gravel roads and the vibrations cracked it i think it would be solved if you just print it from TPU
Mini fender, mud guard, and DTF base piece, all in one! For MatixBuilt rails with BTG tire. Larger tires or offset (raised/lowered position) may require modification to the riser. This interfaces with the GT XL/BTG fender, not the regular…
The Untamed Ox, Cast in Utility. This is not a vehicle. This is the unwavering companion of explorers, soldiers, and shepherds, cast in box-section steel. The Land Rover Defender 90 immortalizes the indomitable, go-anywhere spirit that…
This fits the wider rubber part of the brake line that is 14 mm in diameter. I tested this with HEL brake lines on a GSX-R600 K8. It requires: A 4x1.5 mm zip tie (or smaller) Two rivets: it's designed for a 3 mm rivet, but it might…
This is a set of inserts to hold game components and making setting up and putting away the game as fast as possible. There are four files: enemy token holders (need one for each of the three enemies), dice and gem tray, enemy card…
The Problem If you own a KingSong S18, you probably know the annoying rattle caused by the inner wheel cover. The original design relies on only two small screws per side, which often loosen over time, causing the fender to vibrate or…
About this collection This is a three-piece functional kit for fat e-bikes with a rear rack. The goal was simple: extend the rear protection, clip a battery-powered tail light, and store small electronics under the handlebar — all in a…
Already tested and working 200+ kilometers - Upper part with reflector (PLA material) If this fender lasts 200 kilometers without any damage, then I will update this description to already tested and working. ;-) You can choose from two…
I've used this mount in my Defender 90 for a good while now and I'm very happy with it. It's printed in PETG using 0,20mm QUALITY layer height. You will need M2.5 countersunk machine screws in 12 mm and 6 mm lengths. The short screws (2 ×…
This fender eyelet is designed for decorative and light-duty use. I recommend to print it laying an its side, because of layer orientation. Please note that 3D-printed parts do not offer the same safety or strength as metal components.…
Fender bracket Holder / wheel house stiffener,left/right for Peugeot 405 7119.63/7120.92. Very rare spare part, laser cut from ~ 1mm steel and bend or thicken up and 3d print if you feel brave.
This little fender design (printed in PLA) has been valiantly defending my lower pivot from muck and rocks for the last 2 years. Attaches with 1x ziptie, has a rib/cutout to fit to weld, but not required & should work lower down or on a…
This is the nth variation of the door lock button escutcheon surrounds for the Land Rover Defender 110 / Land Rover Defender 90 / Land Rover Defender 130. I used @shadow_964’s part as a base and reinforced the rear tab, which is where it…
I tried designing and printing a few different versions of this pickguard from various templates found online, but they never really fit well. Could be minor differences in the Player series or something... who knows... But I just scanned…
Changed to Reverse P and also changed to single volume, no tone control. Changed the split location to hide better. If you use this pickguard you'll need to route the body for the new pickup location for the D and G strings. Best way to…
No chassis modification required for installation simply unscrew and replace a couple of screws with 2mm londer ones, for the shock mounts use 3mm nuts and washers to prevent chassis from scratching, usage of washers is recommended for…
bike did not have a rear fender mount, press the nut that come with the fender into the slot and use the bolt to attach it, bend the metal to your preferred angle. the model uses 2 m5 bolts and nuts, camera mount bolts work great
What what what? Fender's famous "Bullet" truss rod nut is one of the most recognizable features of Fender guitars from the 1970s (the so-called CBS era). Years of use Fender used the Bullet nut in production mainly during the following…
New version of my rear kush-hi fender delete, featuring rounded edges and a lip to stop dirt and junk from getting under the footpad. it has cut outs to fit around the torquebox v1.
My version of the Front Fungi Stompies Fender Delete. for some reason the other versions didn't really fit my board so i made my own
Materials: 3 x M3x8 mm screws; 3 x M3 mm nuts; 2 x pieces of tube's rubber glued to legs base. 1 x A4 1 mm thick plastic file cover or print this part if you have a large print bed. Print Settings Supports: No Resolution: 0.2-0.24…
This is a simple to print exhaust model for a TRX-4M Defender. It approximately follows the position of a real exhaust, but with a bit of tuning look (big diameter straight tip). There are 2 models - main body to be mounted on frame-you…
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4. *** Update July 2024: I added a remix where the center piece accepts th flush xLCD cover by…
For sake of weight distribution I designed this roof rack sparewheel mount, so that there is a bit more weight on front of the Defender, with the sparewheel not being on the back, but here on this frame. This clips easily on the Defender…
I've included single and double switch models at 3.5mm and 4.5mm deep. The double configuration was sized for a 1994/95 MIJ MG65 Mustang. Not sure if the spacing will be correct for other models.
A cool little desk caddy/organizer for the Guitar fanatic in your life. Kind of has a Vintage Fender/Tweed/Princeton feel. :) Printed with Matte Brown PolyTerra PLA with fuzzy skin turned on. Body, Top, and Panel are all pretty…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
Mud flaps for Tamiya Land Rover Defender 90. I used an old bicycle tube and cutted it with my printed templates. You need some tiny screws (i used M1.4x5mm) and double sided adhesive tape for the mount. Front mud flaps follow soon
What you see here is a set of windshield wipers with a license plate carrier meant for Trx TRX-4M Defender. These just clip onto the windshield frame. With this design there are more nails hit - wipers are 1 model, easier to print and…
Recommend to use supports and 100% infill on ladder part. Need M3 screw for mounting the spare tire. For mountin in chassis using just existing holes/screws from orignal mount.
replacement for a small but important part. printed sidewards with support in PETG.
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Some imported Land Rover Defenders, do not yet have a US plate mounted to the back. Rather than drilling holes in the body - which is what is typically done - I designed a license plate mount that replaces the Plinth that's sandwiched…
Update: Added a new version with the text embossed and round edged lid. This is a little box designed after the knobs of my electric guitar. Great for musicians to store picks, earplugs, legal plants, etc. The top cap is screwable and 2…
This is a little box designed after the knobs of my electric bass . Good for musicians to store picks, earplugs, legal plants, etc. The top cap is screwable and 2 different types of lids are included, one plain with rounded edges ( the…
If you want to attach a front SKS Bluemels Prime 45 fender to your fork with the mounting point on the rear side you can use this adapter to enhance the position. It was originally designed to work with a TRP CX carbon fork but might also…
Mudguard for Decathlon Oxelo L500 children's scooter. Slightly reinforced compared to the original. Printed from PETG.
This spacer is a neat solution for attaching your fender to the cross-brace on the rear triangle of your bike. Its shape resembles the fender and provides a pleasing transition. Use the Fusion360 file to change the thickness to your…
This Is a shorty fender designed to be used on BTG tire and steep and deep extended rail builds. i also have a fender delete if thats more your jam here‘s the link for those:…
Onewheel Pint & PintX half fender side trim. I designed these side trims to protect the top of the rail when installing Onewheel Pint & Pint X half fenders like the ones created by NuRxG. They can be printed in PLA or PETG. I then used a…
Stand, sound reflector for iPhone 7 or SE in a Otterbox Defender case. Turns sound towards the front of the phone. Serves as a stand either standing upright or laying on its side. Print Settings Printer Brand: Creality Printer: Ender 3…
