1 / 2
Front fender extension Silence S01 / Seat MÓ Electric Scooter — image 1
1 / 2

Front fender extension Silence S01 / Seat MÓ Electric Scooter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

To screw on the original fender. Protects the steering head bearing and the connectors there.

Rating
4 / 5
Likes
14
Downloads
278
Makes
1
Views
1,693
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Three countersunk screws M3 x 10, three lock nuts M3

Best to print with ASA filament, or also with PET-G. No PLA.
When printing 193 mm high.

Remove the original fender: Unscrew two screws and the two reflectors together with the black brackets. Align the extension on the original fender and fix it with suitable clamps. Drill the three mounting holes (3.2 mm) through the fender from the inside to the outside. The extension serves as a drilling jig. Screw the extension tight. Mount everything again.

Tags