1 / 2
Front fender extension Silence S01 / Seat MÓ Electric Scooter — zdjęcie 1
1 / 2

Front fender extension Silence S01 / Seat MÓ Electric Scooter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To screw on the original fender. Protects the steering head bearing and the connectors there.

Ocena
4 / 5
Polubienia
13
Pobrania
278
Wydruki
1
Wyświetlenia
1686
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Three countersunk screws M3 x 10, three lock nuts M3

Best to print with ASA filament, or also with PET-G. No PLA.
When printing 193 mm high.

Remove the original fender: Unscrew two screws and the two reflectors together with the black brackets. Align the extension on the original fender and fix it with suitable clamps. Drill the three mounting holes (3.2 mm) through the fender from the inside to the outside. The extension serves as a drilling jig. Screw the extension tight. Mount everything again.

Tagi