M365 scooter - flexible front mudguard flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M365 scooter front mudguard flap
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I use 10" tires and there's limited space between front mudguard and the tire. Designed a flap that can be attached from the outside and without any tools. Holds in place with friction and is pretty snug, depending on printer/slicer/filament you might want to enlarge the model by few percent. If really necessary, a drop of CA glue will secure it to the mudguard more.
Update: uploaded latest iteration, meant to be printed fully in TPU. At least flap part should be printed in TPU so why not print all. Adjust line width to print the flap part in one motion (one perimeter), without travels.