Xiaomi m365 Anti Vibration Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer anti vibration pad for the electric scooters m365 from Xiaomi reduces the vibration and slack on the hinge.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 582
- Wydruki
- 1
- Wyświetlenia
- 1628
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them.
This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes to install.
You can use any material you want PLA, PETG, TPU … personally I used PETG for heat resistance.
3 Different Spacer Sizes:
1 mm
0.8 mm
0.6 mm
Print settings:
Layer height: 0.16mm
Infill: 20%
Supports Required: Yes
Material: PETG
Assembly Steps:
1 - Remove the main steering screw, you will need a 5mm hex key
2 - Remove the round spacer like shown above.
3 - Insert the 3d printed anti vibration pad in a centred position.
4 - Install back all removed parts making sure the pad is centred correctly.