Xiaomi m365 Anti Vibration Pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer anti vibration pad for the electric scooters m365 from Xiaomi reduces the vibration and slack on the hinge.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 584
- Makes
- 1
- Views
- 1,637
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them.
This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes to install.
You can use any material you want PLA, PETG, TPU … personally I used PETG for heat resistance.
3 Different Spacer Sizes:
1 mm
0.8 mm
0.6 mm
Print settings:
Layer height: 0.16mm
Infill: 20%
Supports Required: Yes
Material: PETG
Assembly Steps:
1 - Remove the main steering screw, you will need a 5mm hex key
2 - Remove the round spacer like shown above.
3 - Insert the 3d printed anti vibration pad in a centred position.
4 - Install back all removed parts making sure the pad is centred correctly.