1 / 8
Speedybee Mario 5 O4 Pro Retrofit Jig — zdjęcie 1
1 / 8

Speedybee Mario 5 O4 Pro Retrofit Jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drill guide jig to add O4 Pro mounting holes to older Mario 5 frames

Ocena
0 / 5
Polubienia
5
Pobrania
8
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
GNU General Public License v3.0

If you’ve got an older SpeedyBee Mario 5 frame and want to mount the DJI O4 Pro, you can make the necessary holes easily with this jig.

The newer revision of the Mario 5 added a few extra holes to support O4 Pro mounting. Since the CNC aluminum head is otherwise the same, this jig helps you accurately drill those missing holes so you can use the official mount without guessing or risking misalignment.

The jig is split into two halves that clamp onto the CNC head and guide your drill bit into the correct positions.

What you’ll need:

  • 3× M3x8mm screws (to clamp the jig together)

  • A drill + M2 metal drill bit

  • Small files (optional, but helpful for cleaning up and slightly adjusting the upper hole)

Extra parts:

  • Official TPU O4 Pro camera mount from SpeedyBee (included here for convenience)

It’s a simple mod, but take your time when drilling, the upper hole is a bit tricky. I’d recommend drilling the far right side first, then the far left. If you have small files, you can clean up the material in between for a neater result. Alternatively, you can carefully use the drill bit with light sideways pressure to remove the remaining material.

I originally made this while waiting for the official O4 Pro upgrade kit to arrive, but now I’m not even sure I need it, hopefully it helps someone else do the same modification.