Speedybee Mario 5 O4 Pro Retrofit Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drill guide jig to add O4 Pro mounting holes to older Mario 5 frames
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v3.0
If you’ve got an older SpeedyBee Mario 5 frame and want to mount the DJI O4 Pro, you can make the necessary holes easily with this jig.
The newer revision of the Mario 5 added a few extra holes to support O4 Pro mounting. Since the CNC aluminum head is otherwise the same, this jig helps you accurately drill those missing holes so you can use the official mount without guessing or risking misalignment.
The jig is split into two halves that clamp onto the CNC head and guide your drill bit into the correct positions.
What you’ll need:
3× M3x8mm screws (to clamp the jig together)
A drill + M2 metal drill bit
Small files (optional, but helpful for cleaning up and slightly adjusting the upper hole)
Extra parts:
Official TPU O4 Pro camera mount from SpeedyBee (included here for convenience)
It’s a simple mod, but take your time when drilling, the upper hole is a bit tricky. I’d recommend drilling the far right side first, then the far left. If you have small files, you can clean up the material in between for a neater result. Alternatively, you can carefully use the drill bit with light sideways pressure to remove the remaining material.
I originally made this while waiting for the official O4 Pro upgrade kit to arrive, but now I’m not even sure I need it, hopefully it helps someone else do the same modification.