Heated bed Cable pinch prevention retrofit clip for AO-10x series printers, Mendelmax, and possibly the TAZ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your heated bed cable up enough to eliminate the risk of pinching it at full Y extension. It should slide onto the heated bed retention plate, and then is held in place by a zip tie on the cable itself.
Print instructions
Category: 3D Printer Parts Summary
This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your heated bed cable up enough to eliminate the risk of pinching it at full Y extension. It should slide onto the heated bed retention plate, and then is held in place by a zip tie on the cable itself.
Instructions
Print it out, find a zip tie that fits. Tested in ABS with a .5mm nozzle. You may need to use support to print the cable channel.