Heated bed Cable pinch prevention retrofit clip for AO-10x series printers, Mendelmax, and possibly the TAZ
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your heated bed cable up enough to eliminate the risk of pinching it at full Y extension. It should slide onto the heated bed retention plate, and then is held in place by a zip tie on the cable itself.
Print instructions
Category: 3D Printer Parts Summary
This is a retrofit clip designed to slide onto a 3mm thick aluminum heated bed retention plate, which will raise your heated bed cable up enough to eliminate the risk of pinching it at full Y extension. It should slide onto the heated bed retention plate, and then is held in place by a zip tie on the cable itself.
Instructions
Print it out, find a zip tie that fits. Tested in ABS with a .5mm nozzle. You may need to use support to print the cable channel.