1 / 12
Dust Port Retrofit for Skilsaw Classic Circular Saw — zdjęcie 1
1 / 12

Dust Port Retrofit for Skilsaw Classic Circular Saw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Watch this video for full install and details: https://youtu.be/ymzXKkLXK9s This great circular saw has only one…

Ocena
0 / 5
Polubienia
17
Pobrania
109
Wydruki
0
Wyświetlenia
1283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Watch this video for full install and details: https://youtu.be/ymzXKkLXK9s

This great circular saw has only one weakness: no dust collection port. Today we fix that.

Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up against 2 inner walls, giving you a 2.4 thick plastic part that prints the quickest and is the strongest. By the way, in those settings, assuming you are printing with a 0.4 diameter nozzle, you would have it emulating a 0.6 nozzle.

Hardware / non-printed materials:

• Three (3) Screws, M4 x 8mm, and matching M4 nuts
• CA glue
• Loctite 243 Blue Medium Strength Threadlocker

3D-printed items
• In addition to the two STL files in this 'thing' — in the video I also mentioned my other reducer for my Ryobi Table Saw. Here's that link: https://www.thingiverse.com/thing:5215852

Variable torque tool used in video
BLACK+DECKER Electric Drill, 3/8-Inch, 4-Amp (BDEDMT)

IMPORTANT: Use at your own risk! Take all precautions and use proper protections. Any use of this modification by you indicates you agree to indemnify and hold harmless Douglas Joseph and Design8Studio in every way imaginable.

Consider saying thanks
If you like/use my files and do this modification to your own saw, please consider buying me a cookie via this link: https://paypal.me/dougjoseph

Note All links are affiliate URLs when and where possible.

Print Settings

Printer:  BIQU B1

Rafts: No

Supports:  No

Resolution:  0.3

Infill: n/a (solid part if using these settings - infill setting won't matter)

Filament: Amazon Basics PLA Black 
 

Notes: 

Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up against 2 inner walls, giving you a 2.4 thick plastic part that prints the quickest and is the strongest. By the way, in those settings, assuming you are printing with a 0.4 diameter nozzle, you would have it emulating a 0.6 nozzle.

Category: Tools

 

My PayPal tip jar: https://paypal.me/design8studio  

 

Various LowRider 3 CNC remixes:

 

View all my models and remixes on Printables:

 

*Amazon product links are affiliate links.

 

Change Log:

  • February 7, 2025 - added SketchUp source file, plus added Fusion 360 archive file version (made from importing SketchUp file into F360), and also added STEP file exported from the solid body in F360. (This is as was requested in comments.)   
  • October 9, 2022 - initial upload ported to this model site
  • January 25, 2022 - initial upload (on another model site)

Tagi