1 / 1
Retrofit trim cap for Harken MK2 furler — zdjęcie 1

Retrofit trim cap for Harken MK2 furler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,01 € – 1,23 € netto (bez VAT)

Dla pliku: Harken_ht_MK3S_1h21m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,12 € netto (środek widełek).

Masa podana przez autora
10 g
Czas druku podany przez autora
1,34 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Replacement trim cap for Harken MK2 furler. Replaces trim cap part number 869.

Ocena
0 / 5
Polubienia
8
Pobrania
72
Wydruki
0
Wyświetlenia
600
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a replacement i designed for the worn out trim cap on top of the Harken MKII furler. It consist of two halves so that it can be fitted without the need to disassemble the furler system.

A strong adhesive or epoxy is needed to join the halves together. I used Bison plastic epoxy with good results. The photo is after one year of intensive testing.

Print both parts upside down.

Use a very tough UV resistant filament.

I had good experience with Colorfabb HT.

Tagi