Liczymy pasujące modele…
A deck for a sailing boat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. The ramp includes an hole to fit a magnet of 10x2mm, so mini's with magnetic bases are able…
https://datadrivensailing.gitbook.io/wiki/hub/details
A deck for a sailing boat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. The ramp includes an hole to fit a magnet of 10x2mm, so mini's with magnetic bases are able…
A deck for a smaller sailing boat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. The larger model can be found within my boat collection. The ramp includes an hole…
MaxiMOOP: A Multi-Role, Low Cost and Small Sailing Robot Platform Authors and Thanks: Paul Miller, Matthew Hamlet, Colin Sauze, Mark Neal, David Capper, Daniel ´ Clark, Ashley Iles, Louis Taylor Here you can find the edit files (STEP) for…
Benchy: Sailing Strong Since 2015 Celebrate one of the most iconic 3D printing benchmarks with the Benchy: Sailing Strong Since 2015 stand! This display stand is the perfect way to showcase your Benchy models, turning them from a simple…
Turn the Vane 5° for standard sized print bed. Use UV-Stable Material with good abrasive characteristics (e.g. PETG) If you want to use this on a boat Mast, consider that the colour you choose should be seen. Glue together the Base and…
Check it out sailing here: I also have a single-masted earlier version that I have not uploaded. Print Instructions Upper Hull must be waterproof: 50mm/s, 1.6-2mm thick walls, 7.5%-10% infill, 0.12-0.16mm layer thickness. Print the rudder…
Best to be printed on a Multi-Colour Printer. Can be printed with only 1 AMS Hinges can be made from a cut piece of filament. Model updated 15/11/24 as I wasn't happy with the hinge strength on the base plate. I've included an updated…
This small sailing vessel is included in our COLREG kits. It has a hole for any dayshapes to be raised and is the perfect addition to the classroom.
Dank einer kostenlosen Vorlage im Internet habe ich dieses Knotenübungsbrett mit Ring, Klampe, Poller und Reling erzeugt. Empfehlenswert wäre hier, mehr Füllung zu geben, da die Seile bzw. Knoten einen gewissen Druck erzeugen könnten.
Please check dimensions, might not fit for everyone. Print, test, leave a comment or suggestion and enjoy. https://buymeacoffee.com/thorben
As a hobby, I enjoy using Blender, the free 3D modeling software, to recreate hulls of dinghies and various types of boats. My goal is to make these designs accessible to more people, so I’ll be sharing the 3D models as well as CNC cut…
Toppers are great starter boats to learn sailing. Now every little sailor can show of their favourite boat class on a keyring. Brilliant for boat related keys or on backpacks. Print instructions: print flat no supports 0.2mm 15% infill…
Print with PetG for tougher use. Works with cookie, gingerbread or any dough. Have fun!
Here is sailing Benchy!! it is equiped with a sail [mast] that fits on perfectly, any filament would do [my fav pla] hope you enjoy!!
Cookie cutter cca 60mm Print Settings Printer: Monster Supports: No **Resolution:** 0,2 Infill: 100% Notes: optimized for 0,4 nozzle Category: 3D Printing
This pair of cleat boots were designed for 200mm cleats but could be scaled or remixed to suit other sizes. All that is required is the addition of some 6mm diameter bungee. Thread it through the holes and knot the ends. The concept is…
Why should you print this? For your best/favourite/fastest 3D Benchy, you need an appropriate display! Filament Material: Any, but I recommend PLA; Colour: Also any, but I recommend: Nozzle–Metal, Sea–Blue; Print Settings Nozzle: 0.1 mm,…
A deck for a smaller sailing boat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. The larger model can be found within my boat collection. The ramp includes an hole…
The older Sunfish sailing dingies had the DePersia bailer to empty the footwell after a capsize or waves spilling over the deck. This metal plug often goes missing (like a left sock), and the company closed down long ago, so “new”…
Sailing Triple Sheet Block with Becket Each sheave needs two 608 ball bearings (22 x 7 mm). The axes are stabilized by two 6 mm pins of at least 58 mm length. The becket is stabilized by a 6 mm pin with 23 mm length. The block can be…
Sailing Double Sheet Block Each sheave needs two 608 ball bearings (22 x 7 mm). The axes are stabilized by two 6 mm metal pins of 40 mm length. The block can be fitted with a soft shackle around both parts of the upper axis to attach it…
Originally designed for lazy jacks, but ended up holding up really well for my furling line as well. Uses 6mm balls (I used 6mm BB gun ammo) Pass through hole should allow 4mm soft shackle to go through, and can also be reinforced with…
RC Fittings for an RG 65 model (65cm category) Stay/backstay/winch fittings. Printed in PLA, ideally ASA or ABS/Nylon Is super important the slicer/infill that you are using, use more than 2 lines for outer perimeters. Category: R/C…
MaxiMOOP: A Multi-Role, Low Cost and Small Sailing Robot Platform Authors and Thanks: Paul Miller, Matthew Hamlet, Colin Sauze, Mark Neal, David Capper, Daniel ´ Clark, Ashley Iles, Louis Taylor Here you can find the edit files (STEP) for…
Designed using Autodesk Fusion. I printed with Anycubic Kobra neo 2. There is a face you are able to print from at that allows for less supports needed for parts of the print that are at an angle. I used callipers to take measurements of…
https://datadrivensailing.gitbook.io/wiki/boattracker/details
I like the laser and like designing prints because I like both of those so I made this Laser with lots of detail.
Description The children's sailing boat is a floating boat with a front handle on a string. Ideal summer toy for the beach or just for the bath. It is designed to be durable. The dimensions of the boat without the mast are 142x70x34 mm.…
Isometric sailing boat keychain. Made with Sketchup. Printed in PLA, 0.2 mm layer, no supports required. Two variants.
Pirate ship / Sailing ship version of a tow ball / tow hitch cover in either 50mm / 1 inch diameter or 1.7/8" diameter. Supports - yes tree
Benchy: Sailing Strong Since 2015 Celebrate one of the most iconic 3D printing benchmarks with the Benchy: Sailing Strong Since 2015 stand! This display stand is the perfect way to showcase your Benchy models, turning them from a simple…
Mark your adventures on the high seas! This thrilling 3D printable accessory features a majestic Galleon or sailing ship battling massive waves and a stormy ocean under dark, cloudy skies. This dramatic monochrome bookmark is perfect for…
Mark your journey across the cosmic ocean! This imaginative 3D printable accessory features a grand Sailing Ship (Galleon) navigating through the stars and clouds, surrounded by planets and a swirling Galaxy . This unique monochrome…
I modeled a Pirate Ship for you. It was a piece I truly enjoyed designing. It turned out to be a very elegant display item for your home or office. I hope you like it. Note: I recommend using your printer’s standard settings. The model…
Print as oriented on the model. Tree supports enabled, 0.2mm layer 0.4mm nozzle. PLA
Turn the Vane 5° for standard sized print bed. Use UV-Stable Material with good abrasive characteristics (e.g. PETG) If you want to use this on a boat Mast, consider that the colour you choose should be seen. Glue together the Base and…
The Ultimate 3D benchy. you can choose to print with supports (highly recommended) or without if you are brave. Can print with 0.4mm nozzle though 0.2mm is better. Model uses 16g of fillament. Good luch printing.
Just enjoy! :) Print Settings Rafts: No Supports: No Resolution: 0.2 layer height, 0.6mm nozzle, 2 perimeters Infill: 10% Filament: PM PLA White Category: 3D Printing
This ship is based off an official DND ship, but made 3d printable for play with minitures. The grid squares are 1in by 1in. ENJOY How many of each to make: propsCrate-1 => x7 propsCrate-2 => x27 propsCrate-3 => x33 propsCrate-4 => x2…
A Mirror Dinghy sailing boat. Easily adapted and scaled for different purposes. Designed for greetings cards, but includes a hole to hang on Christmas tree or as a decoration. Printed in 2 colours for contrast, but could easily be printed…
This is an endstop compatible with the classic 32 mm t-track you can find fitted on the deck of many sailing boats. This is not only an aesthetic element, as long as it can receive serious impacts from the genoa traveler, so my advice is…
Plate models for a sailing ship meant for tabletop gaming. The model is designed to mitigate material consumption and ease portability. To ensure a strong model increase the perimeter to a count of 3. the largest spans are just under an…
UPDATE: the old design is not balanced, when the boat is lopsided it swings to one side... A new version is uploaded A small wind vane for small sailboats, I needed one for my Pouch Faltboot. It can be quickly attached and detached so…
List of non-printed parts 4 pcs - 30mm M6 screw with internal hex head Printing All parts can be printed without supports. For printing the HULL and BOARD parts I recommend using brim. The SAIL part has to be printed with 0.15 mm layer…
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
You have to print three parts. You have to print the ship with support material. If you like it, please give me like!.
Original Design Feb 20, 2023 based on my previous entry “When PIGS Fly” Pork Chop is at it again… this time he went to the desert to test out his parasailing, He has three different designs. Hold on to his harness with him attached to his…
I made this trophy a few years ago to celebrate the winner of the legacy board game Seafall that I played with some good friends. At the time I only had one color filament so I spray painted the ship gold! Now I would use a silky metal…
The model can either be printed separately or as a dual color print. The model is optimized for a 0.4mm nozzle.
Remix with 3mm steel mast and boom and banner sails You need: 3mm steel rod (length as needed) Lead shot (optional, use as ballast) 2x M3 heat inserts (fastening the ropes on the bow and stern) 2x M3 screw (fastening ropes on bow and…
Model Optimist (Opti) sailing dinghy for teaching purposes. This remix removes the words off the sail. I scaled it up some as well. Some supports are needed. The gcode file attached uses the new organic supports.
All informations are included in "manual" pdf BOM: 5mm carbon or glass fibre rod 4mm carbon or glass fibre rod a lot of m3 screws and nuts m3 inserts copper wire 05, 1 and 2 mm diameter and solder sailcloth How I Designed This Category:…
This is similar to previous weed fin but instead of the airfoil increasing around the diameter this fin decreases chord length. Also add bulbs on tips to reduce tip turbulence. Annular fins generate more lift for less draft so in theory…
This is a simple model that can be used to learn and illustrate the sailing maneuvers and rules. Since my initial upload I had to do several fixes, because the model was not printable.
This is my print ready version of Bill Hagerup's Green Hornet footy class RC sailing yacht. This is still a work in progress and I'll upadte once my make hits the water! For commercial licence feel free to contact me!
Warning! These are SUPER TINY. I was able to print all four ship hulls in 22 minutes. There is another file with larger models and a larger variety, but you can also just scale these up as well. Up to you. Detail at this scale is pretty…
Larger Scale Napoleonic War Era Ship Blanks for model building and gaming. 9 different varieties of ships. The “Bowsprit” or forward mas at the bow tends to get a little munchy, but no supports were used on the test samples (except a…
Here is my sailing boat that I modeled. I printed it on the Prusa Mini but it can be printed with any printer. You can make it sail on water or in a puddle but be careful not to take too much wave.It will also make a nice display model on…
Magnetic demo boat with sails to demonstrate sail positions at different point of sails.
A model of a Xebec sailing ship. This miniature is well suited for tabletop games such as Dungeons and Dragons. It comes with a version on a flying stand as well as a version with its bottom cut off to make it look like it's floating in…
Introduction In the last 5 years I have really got into sailing and boating in general, and even after joining a sailing club I noticed that many people subscribe to the “if you cant tie knots, tie lots” method of attaching boats. I am…
Sailing Rope Ending sometimes fall down to water and spare one is needed. I created model in TinkerCad. It was printed from PETG with layer 0,2mm
Infill Sails - Sailing Yacht! You always wanted to own one? well this is your dream come true! As a decor for your home or just as a gift! You can use it to Display your Infill Types for your Projects if you'd like! Modifiers? What am i…
Hello ! Today I would like to show you my latest project "Black Pike" Black Pike is RC Sailing yacht - my own project. During design, I've made two protypes. First one - you can download here Second (final) version is shown on video…
---------------------------------------------------------------------------------------------------------------- Update V2 The initial model included overlapping volumes which did slice correctly in an older Prusaslicer version but not in…
I have here 2 files for a jammer for the cockpit of a CLC Pocketship sailing boat. Simple to print and seems plenty strong enough. The one on my boat is the old version with sharpish corners which can be annoying. This is the new and…
Check it out sailing here: I also have a single-masted earlier version that I have not uploaded. Print Instructions Upper Hull must be waterproof: 50mm/s, 1.6-2mm thick walls, 7.5%-10% infill, 0.12-0.16mm layer thickness. Print the rudder…
Walker Bay dinghies are very popular and widely used around the world. I recently decided to outfit my Walker Bay 8 sailing dinghy with an electric trolling motor. I bought a half size 12V DC battery (Duracell SLADC12-35J) which is plenty…
Je me suis fabriqué une voile pour un petit kayak et je voulais avoir un vrai palan comme sur un catamaran de voile légère. Le palan content 13 fichiers. Le corps du palan se constitue du fichier 9 et 10. Le corps du palan avec bloqueur…
Best to be printed on a Multi-Colour Printer. Can be printed with only 1 AMS Hinges can be made from a cut piece of filament. Model updated 15/11/24 as I wasn't happy with the hinge strength on the base plate. I've included an updated…
Sailing into Sunset Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA EryOne Matte RUBY RED Transmission Distance: 1.5 PLA EryOne Rose Red…
2 Files to print the hull and mast separately so they can be done in two colours like I did, the mast slots into the hull but I recommend using some glue to stick it in
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 167.86x235mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
A coaster showing a shiping. When placed in the holder it looks like the ship is sailing on water :)
Laser logos for painting on the great model "Laser Dinghy Model with Stand" by dillenbeck: https://www.thingiverse.com/thing:2409502 Before print, please check the scale of the models! if necessary change the scale on th slicing program…
Desk mount for USB Fingerprint reader - Chipsailing CS9711 / WA28. It fits a very popular USB fingerprint sensor from Amazon/AliExpress. I mounted mine under the desk and it allows me to login on the docked laptop when its is closed. This…
This is a model of my Dad's old sailing boat "The Parramatta". known as a sheltie (sailing boat typical in the Shetland Islands). It has been restored several times and is know owned by the Sunderland Maritime museum. Those sailors…
This design has been revised but is not yet ready for publication. 17-4-2025 Do not print, Information is purely for knowledge sharing. There is a philosophy behind the sealing with doublesided acrylic tape. Changing the design might void…
