Sailing into Sunset - HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Sailing into Sunset
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA EryOne Matte RUBY RED Transmission Distance: 1.5
PLA EryOne Rose Red Transmission Distance: 4.5
PLA EryOne Matte Army Green Transmission Distance: 1.5
PLA EryOne Matte NAVY BLUE Transmission Distance: 1.5
PLA Kingroon Orange Transmission Distance: 4.5
PLA Kingroon Yellow Transmission Distance: 6
PLA EryOne PLA+ IVORY WHITE Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to RUBY RED
At layer #15 (1.28mm) swap to Rose Red
At layer #18 (1.52mm) swap to Army Green
At layer #20 (1.68mm) swap to NAVY BLUE
At layer #23 (1.92mm) swap to Orange
At layer #29 (2.4mm) swap to Yellow
At layer #33 (2.72mm) swap to IVORY WHITE for the rest.