Liczymy pasujące modele…
RC Sailboat based off of the Volvo Open 70 Groupama 4 Model is 1m long It requires a minimum 3 channel radio to be able to control the sails, Keel and the rudder. It can be built as a 2 channel model as well with a fixed keel. Bill of…
Sailwinch Servo Drum 40mm ready to run on a Basic Futaba disk Horn of 20mm single track. 40MM DIAMETER, I will setup for a 10 Turn Servo. M3 servo drum lock M2.5 Horn lock This a remix of https://www.thingiverse.com/thing:2583624 Ready to…
This is a Lead Bulb Mold for Marblehead Class RC. The Ballast is divided in 4th pieces, symmetrically. The overall lenght is 350mm, and the weight is something near between 3000-3300Kg. The halves were divided in the center of mass of the…
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
This is a set of sailmaking blocks based on Swede Johnson's designs. I have several formats available, even a photocopy of the original drawings and instructions. I have his original drawings, but using modern CAD software, I faired his…
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
Mast collar for 2.4mR saliboat. Used on Norlin MKIII builds from Charger. One late 90s one 2009 build. Printed on BambuLab P2S with PETG.
This tool is intended for bending RC sailboat masts. It is specifically designed for the common 11.1 mm thin wall tempered aluminum masts seen in IOM-class sailboats. You need to print: Frame sides x 2 Lower roller set x 2 Bearing spacer…
Universal stand for RC sailboats. Design notes Simple to print and source parts. Folding design for transport and storage Wall mountable https://www.facebook.com/profile.php?id=61580385045535 v1.0 Release Base Stand Universal bunk .STEP…
The Racing Sparrow RS Ranger is a 695mm long 3D printed radio controlled model yacht designed for smooth sailing and relaxed fun on the water. This affordable, easy-to-build boat is ideal for anyone looking for a simple and enjoyable…
The Racing Sparrow RS Footy is a 305mm long 3D printed radio controlled model sailboat designed for fun, simplicity, and low-cost sailing. Built around the popular Footy class, this compact boat is easy to print, quick to assemble, and…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
If you get value from my work, consider supporting me at stu142.com/supportme . Links may be affiliate links. Mini sailboat model of a laser. It's easy to print, given the multiple parts, and allows for different colors. Assembly: Print…
Introduction I teach beginner sailing and designed this model to help my students understand the points of sail. The orientation of the wind, sails, and hull define a boat's point of sail. Unfortunately, many of my students struggle with…
I like the look when painted with opaque acrylic - the print layers look like wood grain.
The keel is cast lead, so I wanted to enclose it to minimize lead exposure, and avoid drilling lead. This is case for Independence RC sailboat from Chesapeake Light Craft:…
I was shocked by the high prices that are asked for navigation lighting on sailing vessels. Especially for smaller boats which have other rules concerning the lighting than larger vessels. For that reason, I bought two lights and combined…
Segelkurs - Übungsmaterialien Sailing workshop - exercise materials Für Kursleiter: Um den Kursteilnehmern ein besseres Verständnis zum Segeln beibringen zu können, kann mit diesen Materialien die Windrichtung, Segelsetzung und…
Magnetic optimist-like sailboat model for coaching purposes. Print one part of each then snap fit them together. Parts are designed to by tight, some force is needed when snapping them together. Hull No supports needed. Print with 0.2…
This is a set of files for making a ballast bulb for an International One Meter (IOM) remote control sailboat. I have put together a build thread on bulb casting and mold-making using several techniques here:…
This model is meant to avoid tangled ropes on servo winch on an RC sailboat. I designed this for the REELY B1226, after the ropes always tangled up, when I tried to get the sails closer, but the ropes weren't tensioned perfectly. Winch…
Please see the original model for more information. This version of the model is entirely the same except its on a port tack.
Introduction This version has the sail and mast separated into two parts. This allows standard printers to get the sail and mast to be different colors. I also found it interesting to print the sail in TPU. See the original model for more…
A simple to print and detailed model of a small 1980's sailboat The “Oceaan 18" was made by K+S Polyboats in the netherlands. It's a small, sporty sailboat with a cabin big enough for 3 people. It's an inland vessel and not made for rough…
The Racing Sparrow is a 760mm long 3D printed model yacht designed for casual sailing and fun! This affordable, easy-to-build boat is perfect for those looking for a relaxing sailing experience. Google Racing Sparrow for loads of photos…
RC Sailboat based off of the Volvo Open 70 Groupama 4 Model is 1m long It requires a minimum 3 channel radio to be able to control the sails, Keel and the rudder. It can be built as a 2 channel model as well with a fixed keel. Bill of…
It is a model of a sailboat that floats and is somewhat stable, it doesn't have a printable sail but you can easily make one. Feel free to remix if you want to improve it. Building instructions are attached
A great Wall Art of a violin player. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
This low-profile cowl vent box is designed to prevent water ingress into the interior of a boat using a simple labyrinth water trap. The box is extremely low-profile and facilitates cheap rubber cowl vents available on the market. As an…
Screws are 3,5x25 and cable gland is PG7 Category: Sport & Outdoors
A sailboat decoration Use supports Can use as keychain Print slowly 4h print ,easy print. If you want to use as keychain pick model sailboat_keychain.stl Keychain takes 24 mins to print,normal version 4h Keychain version has a hole to…
This sailboat design is my modern take of a classic sailboat with a futuristic styling. It's perfect for display as it can be fitted to give a nautical vibe wherever you place it.
This is a collection of parts and information that will help you build a Rig Box for your RC sailboat. This design fits the A, B, and C rigs for an IOM sailboat. You can lay out your own box and use many of these parts for your own needs.…
This is a collection of parts and information that will help you build a Rig Box for your RC sailboat. This design fits the A, B, and C rigs for an IOM sailboat. You can lay out your own box and use many of these parts for your own needs.…
A ventilation grid that was used on boats back in the 70s and 80s. The ship yard Albin used them on a lot of models. The plastic is getting brittle and they are hard / difficult to fins new so I made my own version. The two parts are…
Miniature model of a sailboat. The mast can be made from a 2mm toothpick or a match and a piece of paper. It floats well. An excellent toy. Printing time about 30 minutes, layer thickness 0.2. Use support when printing.
The Balboa Racing iStart is a common fixture in small boat racing. Having used one both coaching, and in community sailing programs, I've also had to service a few of them. Batteries are intended to be “replaceable” by the manufacturer,…
Please like and download. More wall art on my profile. Please post your makes.
Sailwinch Servo Drum 40mm ready to run on a Basic Futaba disk Horn of 20mm single track. 40MM DIAMETER, I will setup for a 10 Turn Servo. M3 servo drum lock M2.5 Horn lock This a remix of https://www.thingiverse.com/thing:2583624 Ready to…
This is a Lead Bulb Mold for Marblehead Class RC. The Ballast is divided in 4th pieces, symmetrically. The overall lenght is 350mm, and the weight is something near between 3000-3300Kg. The halves were divided in the center of mass of the…
V2 - 07-02-2025: I've modified the Onshape files to include variables for ring diameter, thickness, Sail Ring distance and width. This is now easily modifiable to your exact sail! I did this because my first design ended up being too…
There is a plain sailboat and numbered boats for teaching team tactics. Arrows for current and wind direction are included. Each boat uses six 6x2mm magnets that must be superglued in. I recommend gluing the magnet to the sails/rudder…
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
This unique 3D model represents a nostalgic sailboat adorned with elegant porcelain-inspired patterns. With its fairy-tale aesthetic and decorative charm, it’s perfect for ocean-themed spaces or as a collectible centerpiece. The gentle…
solar panel mount for 1 inch rail on sail boat.. Connect with 6 mm bolt. Used asa
Better Countdown Timer for RC Model Sailboat Race Starts Products used from AdaFruit AA Battery Holder with On/Off Switch and 2-Pin JST[ID:4779 ( JST-PH 2-Pin SMT Right Angle Connector[ID:1769] (for power in to sound board) 1 x Panel…
This is a design for a resin 3D printed mold using Thermacast resin. This is a special heat tolerant resin from Monocure that can be used for casting metal with a somewhat low-temperature melting point like pewter. More info here:…
I was tired of trying to hold the mast of my US12 RC model sailboat as I attached it to the hull…I needed a third hand. This “third hand” snaps to the hull and the mast, allowing you to connect the shrouds, fore and aft stays. There are…
RC Sailboat based off of a Melges 32 sportboat Model is 700mm long and uses a DF65 keel and keel bulb. The model can be printed out an assembled in roughly a weeks time with parts that can be easily sourced. It requires a minimum 2…
My first attempt at editing an existing 3D model in Tinkercad. It came out as I hoped, now to find some rubber and zip ties to mount it on my bike! It works fine! With no dampening, it swings around and does splash some cola out over…
I bought a Cat Trax axle/dolly to move my Hobie Wave sailboat around. The original axle bushing was way more complicated than I thought it needed to be. So I designed a new one as a simple cylinder. The end cap/bumpers were cracked and…
RC sailboat rigging tension meter. Derived from a The EC 12 Manual. Tension meter can be used on any RC sailboat. Base is 3mm slab with elliptical openings to reduce overall weight. Raised circular areas on base plate are used connect and…
Custom box size of 235mm x 130 mm x 4mm. Created a small elliptical depression on the lid to make it easier to open the box. Three tension meters can be stored in the box.
Catalina 27 Sailboat Wall Art Silhouette model. Adjustable size.
Mast gate prevents the main sail slugs from coming off when raising the sail. This model was designed for a Z230 mast. Attached it to the mast with short bolts after tapping holes.
This model is a canting keel system for an RC boat. It can be made to work in other projects. It was originally designed for a 1m long VO70. I have tested the system with up to 3KG at the end of a 300mm keel fin. Should work for boats…
3D model description 1000mm Long, 200mm Wide. 2Kg Bulb. 1250mm Mast. The Racing Sparrow 1000 is a 3D printed model yacht designed for casual sailing and fun! This affordable, easy-to-build boat is perfect for those looking for a relaxing…
Get sailing with this RG65 from Racing Sparrow. The fileset comes with variations so you can build the perfect 650 to suit your style. The RG65 is an international class of RC yacht and is raced all around the globe. Length: 650mm Beam:…
rc scow sailboat that can foil if there is enough wind the keel require 2 m4 threaded rod along its lenght in the middle of the center section it is required to pause the print to instal the screws for the foli rake tuning some threaded…
This replaces the table compression wedge in a Zwaardvis table. Mine was missing the metal wedge so I created this one. Worked fine printed in PLA at 100% infill (since it has to withstand the compression).
ABYC requires AC breakers with exposed wiring to be isolated when a combined AC/DC panel is opened. My Catalina 400, like many older boats, doesn't have a cover for the AC breakers so I made this one in Fusion. Attaches to the wood frame…
Stand for RG65 RC Sailboat-height and length adjustable-you choose the lenght of the 12mm sticks.Stand for RG65 RC Sailboat-height and length adjustable-you choose the lenght of the 12mm sticks. Print it in PETG or PLA, 15% infill.
A multi-part sailboat that can be used as a moving or stationary piece of terrain for your historical, modern, or near-future miniature and tabletop role-playing games. If you like this model please take a moment to check out our Tribe…
These parts are used to manage your rigging during storage and transport. It is not uncommon to see twist ties and pipe cleaners used for this job, but these clips work well and look nice. They have a cutout that will allow your lines to…
The sliding patio doors on our sailing catamaran (2003 Privilege 465 EC) were no longer functioning properly in that they were hard to slid open and closed. I took the doors off and discovered the bearings on the wheels had failed and the…
A foot cleat for sailboats, uses two hex headed bolts with a 7/16 (11mm) wide head. I suggest printing with fuzzy skin on the diagonal face. The picture is of an earlier version of the 150mm cleat, the screenshot is of the 115mm cleat
This is a set of sailmaking blocks based on Swede Johnson's designs. I have several formats available, even a photocopy of the original drawings and instructions. I have his original drawings, but using modern CAD software, I faired his…
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
Better T37 RC sailboat mast and boom fittings and a mast head crane. Fittings are sized for a carbon fiber mast diameter 6.07mm or a carbon fiber boom diameter of 5.75mm. Fitting include a mast step for the interior lower fastening of the…
Mast collar for 2.4mR saliboat. Used on Norlin MKIII builds from Charger. One late 90s one 2009 build. Printed on BambuLab P2S with PETG.
This is an updated, more durable version of my Thingiverse model. If you want to thank me, https://ko-fi.com/maxpi After the parts are printed, they need to be connected together using two wire segments 12AWG 4mm2 D-2mm. Clamp a piece of…
Sailboat token that is easy to print and easy to grab when playing. I used a .4mm nozzle and tested with multiple brands of PLA.
This model represents a stylized sailboat emerging from a dynamic ocean wave, designed as a decorative sculpture. It combines smooth flowing curves with sharp sail geometry, making it suitable for display pieces, gifts, or artistic 3D…
This was made for Sun Odyssey 54DS for service of ball baring traveler, as a tool to move assembled traveler back to its position on the boom.
Remake of a 42 mm drum with holes to make it lighter. Final weight is 7 grams. Good for 2,5 turns servo winch. Vídeo of the sailboat with the drum:
This tool is intended for bending RC sailboat masts. It is specifically designed for the common 11.1 mm thin wall tempered aluminum masts seen in IOM-class sailboats. You need to print: Frame sides x 2 Lower roller set x 2 Bearing spacer…
Universal stand for RC sailboats. Design notes Simple to print and source parts. Folding design for transport and storage Wall mountable https://www.facebook.com/profile.php?id=61580385045535 v1.0 Release Base Stand Universal bunk .STEP…
The Racing Sparrow RS Ranger is a 695mm long 3D printed radio controlled model yacht designed for smooth sailing and relaxed fun on the water. This affordable, easy-to-build boat is ideal for anyone looking for a simple and enjoyable…
The Racing Sparrow RS Footy is a 305mm long 3D printed radio controlled model sailboat designed for fun, simplicity, and low-cost sailing. Built around the popular Footy class, this compact boat is easy to print, quick to assemble, and…
If you own a Beneteau sailboat these might be the bushing that holds up your helm seat. As you enter the boat from your sugar scoop, these bushings protrude from the fiberglass to hold up your removable helm chair. On my Oceanis 411,…
Add a touch of coastal elegance to your space with this modern sailboat sculpture. Featuring a sleek minimalist design and smooth flowing lines, this 3D printed sailboat makes a stylish accent for nautical décor, office desks, shelves,…
Set sail with this elegant Classic Sailboat Miniature , a simple yet charming 3D printable model inspired by traditional sailing yachts. With its clean lines, detailed sails, and compact size, this decorative boat is perfect for nautical…
