1 / 1
Simple Sailboat — zdjęcie 1

Simple Sailboat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a sailboat for fun.

Ocena
0 / 5
Polubienia
3
Pobrania
52
Wydruki
0
Wyświetlenia
503
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made a boat. I wanted to experiment with thin surfaces and thin vertical supports, and I think this is about as thin as the printer (a Prusa i3 MK3S) can reliably do.
The sail and boom were attached using a 3d pen. I nearly melted the mast off with the tiny glob of filament.
I may add a forward sail later on.

Tagi