Sailboat Pedestal Compass Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The cover for the pedestal compass on our sailboat cracked, so I decided to make a replacement.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This model is 203mm in diameter (about 8 inches). I will be making a smaller 7" model too. It should be easy for anyone to resize. I tried printing this a couple of ways. This is the first time I have designed something from scratch, so I took a very simple approach. I used Fusion360 to create the sphere, then cut the sphere in half in Slicer. I tried printing this with the widest part on the bed, but that made for tricky overhangs for the last 20 layers as it closed out the top. this is my 2nd implementation, where I turned it “bowl side up” and used organic supports- this was a much more successful build. For my use I used :-
Prusa ASA 1.75mm filament;
2mm layer heights,
perimeters at 4 with 4 solid layers on the bottom and none on the top to make an open ½ sphere.
Seam position is random.
0% fill density.
Outer brim only at 5mm (this was probably overkill)