Sailboat Pedestal Compass Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€22.12 – €27.04 net (excluding VAT)
For file: sphere 203mm v1_0.4n_0.2mm_ASA_MK3S_22h8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €24.58 excluding VAT (range midpoint).
- Weight reported by the author
- 170 g
- Print time reported by the author
- 22.14 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The cover for the pedestal compass on our sailboat cracked, so I decided to make a replacement.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 1
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This model is 203mm in diameter (about 8 inches). I will be making a smaller 7" model too. It should be easy for anyone to resize. I tried printing this a couple of ways. This is the first time I have designed something from scratch, so I took a very simple approach. I used Fusion360 to create the sphere, then cut the sphere in half in Slicer. I tried printing this with the widest part on the bed, but that made for tricky overhangs for the last 20 layers as it closed out the top. this is my 2nd implementation, where I turned it “bowl side up” and used organic supports- this was a much more successful build. For my use I used :-
Prusa ASA 1.75mm filament;
2mm layer heights,
perimeters at 4 with 4 solid layers on the bottom and none on the top to make an open ½ sphere.
Seam position is random.
0% fill density.
Outer brim only at 5mm (this was probably overkill)