Liczymy pasujące modele…
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
A replacement head for the Einhell Trimmer GC-CT 18/24. It replaces the original single-blade-head with a multi-blade head. (The provided .stl files only have three blades, but you could go with more by editing the .scad file, or using…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Introducing a cost-effective replacement Mow Ball for the DR Walk-Behind Electric Trimmer. This 3D printable part is designed to replace the factory Mow Ball that typically wears out due to friction with the ground. Print this durable…
Wydruk około 8,98 €–10,98 € nettoWstępna wycena jednego wariantu
These Concealed USB Cable Trim Rings (2 sizes) are used to hide drill holes when concealing a USB cable in the wall . They were designed for use with Ring Indoor Cameras , but they can be used for any application where you wish to improve…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Trimina ve tvaru hvězdy na téma násobilka. Star-shaped trimmings on the theme of multiplication.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…
Inspired by the PS5 Controller, this grip is super comfortable and fairly easy to take on and off. Print in a more flexible and fatigue resistant material such as PETG, Nylon, etc. as the top clip needs to flex to take on and off the…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
I bought recently a Einhell GE-CT 18 Li cordless grass trimmer. So here's blades for it. Might fit other trimmers too, Bosch blade looks identical. Red blade is original, blue one is printed. Print Settings Printer Brand: Prusa Printer:…
Good looking design of trim blank for nutella glas candy dispenser. HOW TO PRINT: Recommended Layer Height: 0,2mm Support: No PLA / PETG works fine. Brim: No
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades. Reverse them and use the other side when it gets dull. It should cut off the crimp about 4mm from the end. Use 3mm screws and nuts for…
Valance clip for Levelor Trim+Go window blinds. An OEM clip broke quite quickly. This clip is stronger (thicker support section). I printed in PETG vs PLA for extra flexibility and strength. Please make sure that you are selecting the…
A piece of plastic to hold your cable on the model3 and modelY tesla 2nd generation interrior trim. Check this other design to understand how it works. https://www.printables.com/fr/model/214285-tesla-model-y-center-console-cable-holder…
A rectangular trim kit that can be installed under the Nest Thermostat to cover up any imperfections on the wall.
Compatibility: Fits VW Golf III (1991–1998), Jetta MK3 (1992–1998), Vento (1992–1998) vehicles. Secure Mounting: Precision holes align with factory mounting points for snap‑in installation. No need for OEM rubber insert, Durable Design:…
Texture rolling pin for clays and epoxies. Can be used to create a pattern of trim that would look great for miniature walls or ceilings. You can run a small rod through the center to use as a handle. To avoid sticking, wet the roller…
Texture rolling pin for clays and epoxies. Can be used to create a pattern of trim that would look great for miniature walls or ceilings. You can run a small rod through the center to use as a handle. To avoid sticking, wet the roller…
I printed it wrom PLA with this setings: nozzle temp.: 200 C bed temp.: 60 C It took 29 minits to print. Čep2 file is updated disain. 25 min. print time.
You can change filament at layer for different colored Mustang and background. MMU/AMS not required. I hope you enjoy the model! Comments📖, likes❤, ratings🤩 encouraged! EDIT 5Oct2026: Changed License
Room door trim corner - Squirrels#10🐿 ⚠Prossima Cornice Porta al raggiungimento dei (30download e 10like) ⚠Next door trim corner to the achievement of (30downloads and 10like) ⚠Consiglio per avere un ottima qualità visiva, stampare il…
So, I can be a bit of a klutz some times. I broke the delicate white plastic backing piece that retains the standard detachable trimmer blade to my Wahl rechargeable cordless trimmer. It was like $8-$9 to buy a replacement. I decided to…
📥 Downloaded it? Awesome! If you also hit 💙 and drop a quick 💬⭐, that would be perfect 😎. Got any 🔧 suggestions for improvements? Don’t hesitate to share!
I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…
adds a bigger bottom plate to the trim router for increased stability and better dust collection. I used PETG for improved strenght. Top plate might need some supports. Used hardware: 4*M4x8 4*M4x12 4*M4 threaded inserts
2026 Version 2 Update: I optimized the original version for ease of printing. This version has small bridges for the wire channel built-in to the model as shown in the gif. By adding bridges and removing the contour from the bottom of the…
I had a request for this from someone on reddit. Scanned with an einscan sp no repairs or modifications. i haven't printed this.
Modeled by trial and error. Fitment will be slightly off so shape it with sandpaper. Print face down and use supports. I used ABS+ to prevent warping on a hot summer day. Used body filler to fill the imperfections before painting. The…
Replaceable blades for grass trimmer. Easy print, Robust like Steel !
The design is not perfect but I have shared the STEP file for modification, enjoy !
This is new windshield trim for the honda del sol, it's not a recreation of the original but a completely new design that eliminates the stupid plastic clips that always break and utilizes built in channels to lock into the factory metal…
Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 100 Filament: 3djake niceABS Category: 3D Printing
A clip for attaching the trim piece to the top of Levolor window blinds. Two different versions included but V2 works better in most cases. Printed in clear PLA at 0.2mm layer height.
This is a smartphone stand for your model 3 and Y (2nd and 3rd generation). It's suppose to hold your phone while allowing to be charged. If your smartphone doesn't have wireless charging. Need reorientation before print. Ceci est un…
A trim switch for flight simulators similar in size and design to the Honeywell 200-09187-0000 trim switch used in Diamond aircraft and others. In contrast to the original switch, both handle parts are fixed together for simplicity. Use…
These are replacement left and right trim pieces for the driver side dashboard of some 90's OBS Ford Trucks. I modeled these using the OEM dash panel out of my Bronco so I can't vouch for fitment in aftermarket panels, however I'd imagine…
An ergo grip for the TrimUI brick.
Tesla Model Y Juniper 19" Wheel Rim Protection Trim Protect your Tesla Model Y Juniper (2025/2026) 19-inch Crossflow wheels from curb rash with these 3D-printable rim protection segments. Features - 6 or 8 interlocking segments - fits…
Printed in PETG with 5 walls and 15% infill. I like having the trimmer stored in this orientation so that the cutting head doesn't attach my shins when my wife parks too close to the wall. It's held up with 2 #10 x 1.25 sheet metal screws.
Revised behind grill trim that does not have a place for logo in the corner. meant to replace the original behind grill trim in a previous design.
This is a remix of the model available here. https://www.printables.com/mode I changed the way it attaches to the table.
Slim grip case for the TrimUI Brick Features raised pockets so the screen and buttons do not touch a hard surface at all holes to see the top led bar and charge while the Brick is in the case snap on hinge with no extra part needed slim…
Simple shotshell trimmer - needs a 1/4" screw for adjustments and a scalpel blade for cutting shells. I sugest at least 3 walls (just to hold the scalpel blade), 10% giroid or cubic infill. The scalpel blade must be pressed while hot with…
I had to make thinner rosette's to clear our sliding door. It has also come in handy to replace missing trim blocks. I would advise replacing both trim blocks to ensure they match. I put glue on the back of the block and hold it in place…
This spool for a weed eater / weed whacker fits a craftsman auto feeder string trimmer. The ratcheting works smoothly and only the inner hub for the spring may require some slight sanding depending on your printer and z-seam. With a…
I recently equipped my car with a slightly more modern touch screen head unit. But, once again, my 2009 Suzuki Swift turned out to be a little more complicated than just whacking it in and wiring it up. Modern dashboard design trends…
I had a half functioning Trimble bipod that required some additional bits. A quick measure up and a bit of design in Fusion 360 and its now working great. Prints were done in PETG and are working great. The button measurement is 20.75mm…
Stand for a SilverCrest Hair and beard trimmer. Model number: SHBS 3.7 B Printing: No support needed min 15% infill 0.2 layer height
This is a model for a replacement safety key for a IMAGE Trimline/DP/Vitamaster/Roadmaster/Spectrum/Tonar treadmill. A friend had a treadmill without its safety key, instead of buying the key from Amazon…
Throttle lever for a whipper snipper / weed whacker / line trimmer i have. Very basic design, however it works a treat. Sorry i have no details on the line trimmer i have. Its mixed makes as its very old
De Rosa Handlebar post lower trim (regular and slim) Allows for 5mm of drop in the handle bars.
VW Up shifter boot trim. Dimensions arent exactly precise but it fits.
A fastener-free hook to slide behind window trim and hold a plant
Ring clamp for line spool. PA6-GF30. Strong like Steel!
Same as OG except no ball. Just creates a flat surface to stick whatever phone mount (or other mount) you want to it.
I made it from an original one. Impossible to find. No fabrication anymore
Spare part for Kettler treadmill. Holder for a landing trim cover.
Drill guide to drill out the hole supports accurately. Use ½" and and a 5/16" drills. Stack two blade ends in the cutouts and clamp face down between wood and the guide using wood screws.
Grass Trimmer Blades Drill Guide Clamp for use with the Grass Trimmer Blades Drill Guide. Use 1 3/4" lomg bolts.
The FSL becomes a pretty handsome driver once you add the ring. I have not performed any before/after measurements, but I'm sure it cuts down on diffraction from the lip as well. Settings I used: 4 wall loops 30% gyroid infill .16mm layer…
The alignment pins are on the small side and meant for use with glue or epoxy. If you want a more snug press fit, scale up a couple percent!
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
This model was designed for these tools: deburring tool , hobby knife . The design of these tools is fairly ubiquitous, but please measure your own tools before printing as they might not fit. Pictured is an older revision of the ⅓ height…
These are replacement Tetrimino pieces for the Tetris Dual game. I had bought this game at a charity shop, but there were a few pieces missing. It was playable without them, but made it a slightly unfair game. I decided to model the…
2026 Version 2 Update: I optimized the original version for ease of printing. This version has small bridges for the wire channel built-in to the model as shown in the gif. By adding bridges and removing the contour from the bottom of the…
The original nut was designed for easy manufacturing, but after 1 or 2 removals the weak thread becomes unusable and the trim can rattle. Remove the trim Pull apart the nut Clean the threads on the stud of the car if needed (M6x1.0) Screw…
Barrel Trimming Pen Blank Squaring Jig to be used with Bench top Disc Sanders. You just slide your blank along the mandrel rod into the rotating disc to square your blank. You can clamp the jig to your miter slide or clamp the miter to…
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
Update: Added version with slightly larger magnet holes I designed a magnetic case for the Trimui Brick handheld console, complete with a set of handy features: Utilizes the foam insert that comes with the Trimui Brick Slots for 5x2mm…
Black & Decker Polesaw/Trimmer Hanger Description This is a simple bracket for hanging a Black & Decker polesaw/trimmer and accessories. Materials Support me by using the affiliate links below Filament PLA Filament:…
There are two versions of this model, one designed to use m3 nuts for assembly. The other for using 4mm high m3 hot threaded inserts. Step files included. Knob included, if you need more type of it leave a comment 👇 Print settings…
Boczne zaslepki do transcivera Omni VI
This is for those that want to add color next to the rear window on the Ford Maverick. This model is solid - there is no cutout of the POWERCAT in this model. :) The back side has a 1mm border to allow for 3m automotive tape. Print face…
Edge guide attachment for Ryobi PCL424 Trim Router. It allows several inches of adjustment and has ¼" marks along the bottom to help measure and ensure staying square. Needed: M5 x 20mm bolts QTY: 2 (for thumb screws to hold on edge…
Floor trim corners and ends Koncovky pro podlahové lišty SLK50 z Brena
I printed mine in a fuzzy texture to hide the layer lines but it can be printed just fine without texturing too. If using the STI panel with the inlay text, it could be filled with paint, or there is a cutout version for using a colored…
Don't throw away your YardWorks grass trimmer, print a replacement head for it! For model 060-2342-0. Recommended to be printed in PETG, ABS or PC. No supports are needed.
Feel free to comment if the design needs updates. I will test with a project and update if changes are required.
Ich habe den Adapter für meine Zwecke in PETG mit 100% infill gedruckt um eine hohe Stabilität zu erreichen. Der Durchmesser für den Mähfaden liegt bei 2mm.
Warning: This will be tedious as hell to make but I figured it was still worth sharing. If you find any improvements to the method and/or models by all means share it in a comment and/or remix. Soldering and wire stripping equipment will…
Remix model from m_a_CAR Versions for 6.5, 7, 7.5, 8, 9, 10mm guards. Printed with PLA due to layer adhesion issues with my PETG Filament. So I designed versions with easier layer adhesion by adding a 0.25mm layer. However the model…
Trim tabs for a Seadoo X4 hull. These reduce proposing at speed, make the hull much more stable. The two hafts lock together with the center “bow tie” and some epoxy. Enjoy riding!
I made the radius walls almost 3 times as thick as the original for a sturdier construction. Also, the holes didn't fit the rotary encoder that I had so make sure you measure those up before printing.
This remix provides a trimmed Silicone Nozzle Cleaner for Creality K1/K1C/K1 Max based on this model, in order to prevent collisions with the HEPA filter adapter available here . Collisions are avoided when the cleaner is both down and…
trimmed the inner dimension by a few mm so that a larger build plate can fit, I noticed it fit between the z axis extrusions but that it does not fit between the motor mounts so I found the original file by DigiChuck and modified it to…
Printed this in Milwaukee red PETG filament. It places the trimmer flush with the wall. Print two pieces and mount them with standard screws.
A simple stand for the TRIMUI Smart Pro. It includes a small nub that utilizes the 3.5 mm headphone jack to keep the device centered in the stand.
Note: German description below. Replacement Spool Cap for Parkside PRTA Grass Trimmer – 3D Print Optimized This custom-designed spool cap is a replacement part for the Parkside PRTA grass trimmer, specifically optimized for 3D printing.…
📥 Downloaded it? Awesome! If you also hit 💙 and drop a quick 💬⭐, that would be perfect 😎. Got any 🔧 suggestions for improvements? Don’t hesitate to share!
This is a remix of Original California Fastrak Flex CAV Holder by made_man on Thingiverse. It holds a California Fastrak Flex by sliding into the top driver side trim of your car or the trim behind the mirror. It may or may not fit your…
Wall mount bracket specifically for the Ego HT2500 hedge trimmer. Please mount it to a solid board. Printed in Galaxy Black ABS with 3 walls, 4 top/bottom layers, and 15% infill.
Glass door on the hinge side of the centuri carbon has a gap that lets draft in. I created this TPU trim that covers it. I print it 100 on speeds. Retraction length 1.4 or 1.6 Retraction speed 30 and let her rip. Open the door and slip in.
Keep your garage or workshop organized with this 3D printable wall mount designed specifically for the Milwaukee M18 Fuel Model 2825-20 Weed Trimmer. The mount is built for easy installation—holes are pre-aligned so you can secure it…
Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…
This is a remix of the model available here. https://www.printables.com/mode I changed the way it attaches to the table.
This is the air vent frame for a Ford Focus Mk2. The rear tabs are missing and must be glued on. ATTENTION!! The legs in this model are not 100% compatible. There are variations.
This is a simple click-link trimmer attachment tool hanger. The tool clicks into the hanger then the hanger can be used to hang the attachment. I’ve tested this on the Craftsman / Ryobi click link tools.
