1 / 3
Trimmed Ender 3 S1 Pro Z axis motor mount (remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was trimmed to fit a 257x257mm build plate from AliExpress
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
trimmed the inner dimension by a few mm so that a larger build plate can fit, I noticed it fit between the z axis extrusions but that it does not fit between the motor mounts so I found the original file by DigiChuck and modified it to suit
it now has additional support between the slot of the extrusion because on the inner side the surround that cupped the outside of the extrusion is cut off.
sorry the pictures are only of it assembled, forgot to take one before putting it together, too excited.
