Shaun the Sheep Toilet Paper Roll Holder (Narrower Remix)
East to print: 4 x Legs 1 x Body (Printed upright, use brim if needed) 1 x Head No supports needed. Simply glue the legs into the body.
- Pobrania
- 1690
- Polubienia
- 204
- Ocena
- 4,82
Liczymy pasujące modele…
East to print: 4 x Legs 1 x Body (Printed upright, use brim if needed) 1 x Head No supports needed. Simply glue the legs into the body.
Harbor Freight appears to have changed the dimensions of their toolbox. I bought a new one 6/15/25 and the drawer inserts don't fit. Use the top drawer from the original as the bottom drawer on the new version and use this as the new top…
This is a simple narrower for the outer air flow of the Xiaomi Mi Vacuum Cleaner mini.
I created some narrower Lips for my Mini Wheels. They work for every wheel except for the ones with Flat Lips. The outer lips are coming in each bolt circle and 3 different widths (25/50/75), while the inner lips are made for all bolt…
You can dig this into the sand to hide things in or just keep them out of the way while you are at the beach. The interior space is about 90mm in diameter and 150mm deep, suitable for phones, wallets, glasses, keys, etc. This version is…
remix of https://www.prusaprinters.org/prints/146757-spool-holder-with-bearings which is a remix of orginal model https://www.prusaprinters.org/prints/62910-use-m3-screws-spool-holder-for-prusa-mini-flexible both great models! While the…
suports in the middle not needed, see 3mf file
The original model was just a smidge too wide for my printer. I modded it in Tinkercad. Now it fits perfectly.
Modified of orig. Gravity Broom Holder: Made it narrower for 17mm-24mm diameter stick. Made the back became flat surface for double side tape mounting. Software using: Solid Edge 2022
I tried using some other designs of desiccant holders for the spools when I got my first X1C and they interfered with other spools and didn't fit properly because they contacted the internal partitions if the AMS. I hopped over to Tinker…
A Dyson (v1-v6) nozzle for the narrow margin, 6x31 mm. Two option available depending on the use case. No, the lighting is not favorable here, print quality is better than it looks like.
I modified the length of the rails and rollers from the original design so that I could fit five of them into a drybox. Tested and works with Polymaker and Overture 1kg spools. Will probably work fine with other 1kg spools. All other…
Remix of the original RatRig wire guide inkl. clip. This one is narrower (appr. 8mm instead of 20mm ) I used 3M tape to fix it
I liked the original clamp, but I needed longer version. It has 9cm span instead of 5.5cm and narrower hole with 12.5mm diameter.
Shortened for slim tables.
Remixed to be a bit narrower than the original (-0.5mm each side) to fit better in devices with their ethernet plugs unusually close together. A good example are Ubiquiti switches and Dream Machine Pro, etc.
Ganchito con una entrada más fina para que no escapen las bolsas con las vibraciones..-> Mejor imprimir en PETG, ->IMPRIMIR DE LADO para mayor resistencia, haciendo que la primera capa sea un lateral. LICENSE: NON COMMERCIAL prohibida la…
the clamp was too wide for my prusa mini's motor so i remixed it to be narrower
I really like the Table Top Spool Holder. It's simple, practical, & easy to print. The spool holder was too wide for the space I needed it for. I narrowed the model by 16.89mm. (116.5mm wide) I also used another roller that has an easy…
I thinned and narrowed the original design.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful. Since the original RatPach filter from RatRig does not fit (or barely fits) my printer, I changed it to be 4mm narrower. The cover for…
Narrower version of the original bookend for printing purposes.
I like the interchangeable blade design of this squeegee, but when I printed it out with 85A TPU, it was too soft. I made the blade narrower to make it stiffer. Follow BaGooN's printing instructions in his post . Here is the Onshape model…
I love this tool box, but I couldn't use my Mk3s because of a print so I decided to remix it by making it 10mm narrower so I could fit it on my Mini with the supports. I also created one ath is 10mm x 8mm smaller. The mini has a Revo…
The “Violent fan” sold on chinese e-commerce platforms often only comes with a single, all purpose, nozzle. In case you need a more concentrated jet of air, this nozzle has a 10 mm diameter and mounts with the original screws.
Neatly fits Knipex 50 00 180 and 9 8 55
Narrower arm for Mr. Buddy Camera (add a little flair to your Buddy 3D camera)
The original is a good design. i found that when the printer was doing bed level at the far corners it would dislodge. This is a shorter model with a narrower flare. it sits behind the wiring joint. Also does not need supports
Purchased the Yeti 12oz Colster only to find out that it doesn't fit my go-to beer, Coors Lights/Banquets. Found a different adapter out there but really wanted to be able to use the original Colster top with the silicone top which seems…
Most filament rolls are narrower and do not stay in the middle of NaNO3's holder. Snap on distancers to center the roll. Print with PET for permanent elasticity (PLA loses tension over time). For other sizes use the step-file in a 3d…
Love this minimalist holder - exactly what I wanted for trying to fit all into a soft enclosure (so can't hang anything from the sides or top). I went a bit more sloppy, layer height of .22, 2 walls and tops and bottoms, 10% gyroid fill.…
The NFC spools from Prusament have a narrower hexagon in my case. Updated the geometry to fit.
Mouse Trap Tipper for narrower places Only 120mm wide. After tipping it automatically resets for any more mice, so long as there is bate to attract them. Counterweight 3D printed at 100% infill to add weight
Made the diameter of the center narrower to accommodate tightly wound filament samples. I have printed about 10 of them so far using samples I need to use up and they work great. Unlike the original there is no place to hook the end of…
"Stock bar ends are increasing width of handlebars and do not look too good.." - that was motivation for this :) This printed part replaces just the external part of bar ends, internal tube with thread needs to remain to keep some weight…
As a part of my new fillament spoolholder system, I chose to use the Wider and narrower remix spool holder , which is a remix of https://www.prusaprinters.org/prints/146757-spool-holder-with-bearings which is a remix of orginal model…
This is a base clamp for use with the Articulating Wall-Mounted system. There is another clamp on thingiverse. However, that clamp will only clamp to thick surfaces. This clamp is narrow enough that it can close completely. Category: 3D…
The Decathlon rear view mirror 520 (ref 8600893) didn't fit my bike (and many people's bikes judging by the product reviews on Decathlon's website) as the internal diameter of my handlebar is narrower than the mounting adapter provided…
For a long time I used Petclaud's camera bed mount on my MK3, but completing my lack enclosure meant having to look into other options. After designing thing:3666923, I discovered the vertical arm/pole from Petclaud's mount was slightly…
When I repositioned the spool holder to the side , it turned out the standard Creality 1kg spool was slightly touching the printer when slided to the very front. This small part makes the spoon holder slightly narrower so that the spool…
Remix of Minus97's spool holder design, for a bit narrower spool. Roll total width 80 mm, wide enough for 74 mm spool. Print: 2x roll-narrow.stl 2x interconnect-narrow.stl 2x Spoolholder.stl from https://www.thingiverse.com/thing:4714979/…
I've bought a relay board (https://www.amazon.com/dp/B00KTEN3TM) that looked the same as the original design. It ended up being a bit longer and a bit narrower. I've made a simple adapter bar to accommodate the board. The adapter can be…
Print settings same as original clamps.
I'd suggest you measure your bars before you print either my model or the original. Thanks @Manager_Josh as your model works very well
The Decathlon rear view mirror 520 (ref 8600893) didn't fit my bike (and many people's bikes judging by the product reviews on Decathlon's website) as the internal diameter of my handlebar is narrower than the mounting adapter provided…
The NFC spools from Prusament have a narrower hexagon in my case. Updated the geometry to fit.
Purchased the Yeti 12oz Colster only to find out that it doesn't fit my go-to beer, Coors Lights/Banquets. Found a different adapter out there but really wanted to be able to use the original Colster top with the silicone top which seems…
East to print: 4 x Legs 1 x Body (Printed upright, use brim if needed) 1 x Head No supports needed. Simply glue the legs into the body.