1 / 1
Camera bed mount modified for narrower enclosure arms — zdjęcie 1

Camera bed mount modified for narrower enclosure arms

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For a long time I used Petclaud's camera bed mount on my MK3, but completing my lack enclosure meant having to look…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

For a long time I used Petclaud's camera bed mount on my MK3, but completing my lack enclosure meant having to look into other options.

After designing thing:3666923, I discovered the vertical arm/pole from Petclaud's mount was slightly too wide. This is a slightly modified design of that vertical arm, meant to be compatible with my camera Enclosure as well as Bogdanko's camera enclosure.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

No

Resolution:

0.20mm or lower

Infill:

40% cubic or 20% gyroid

Filament: Amazonbasics PETG black


Notes:

Use PETG or ABS. PLA will be too weak / heat-sensitive

Post-Printing =============

Use an M3 screw and a flat square M3 nut to fasten the vertical arm to a bed arm.

Category: 3D Printer Accessories

Tagi