Camera bed mount modified for narrower enclosure arms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For a long time I used Petclaud's camera bed mount on my MK3, but completing my lack enclosure meant having to look…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
For a long time I used Petclaud's camera bed mount on my MK3, but completing my lack enclosure meant having to look into other options.
After designing thing:3666923, I discovered the vertical arm/pole from Petclaud's mount was slightly too wide. This is a slightly modified design of that vertical arm, meant to be compatible with my camera Enclosure as well as Bogdanko's camera enclosure.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.20mm or lower
Infill:
40% cubic or 20% gyroid
Filament: Amazonbasics PETG black
Notes:
Use PETG or ABS. PLA will be too weak / heat-sensitive
Use an M3 screw and a flat square M3 nut to fasten the vertical arm to a bed arm.
Category: 3D Printer Accessories