Spool Dessicant Holder Narrower than others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Narrower holder that doesn't interfere with AMS or other spools. Can also be filled with coins to weigh down spools
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried using some other designs of desiccant holders for the spools when I got my first X1C and they interfered with other spools and didn't fit properly because they contacted the internal partitions if the AMS.
I hopped over to Tinker CAD and threw this together and it works fine.
If you look at the last .jpg file you can see that the ends of the desiccant holder I designed are 5mm thinner than the other ones and that the end caps are smaller in circumference. The reason is that the larger end caps can interfere with the AMS unit because they're too large and stick out too far