Liczymy pasujące modele…
Large desiccant container I created several years ago which has increased surface area for large spool boxes. Posted as requested. I will post an actual picture of it in use later. Box and lid are on the same stl, just ungroup them. Print…
Something I made up in a hurry to hold desiccant tubes in my spool drier box. I have been using them for several years, simple and they work. Printed with Nylon so that they don't melt when hot out of the oven. Please leave me a “Like”,…
Scaled down version of original desiccant box small enough to fit inside of popular Plano ammo box lid . Used velcro to affix to lid, does not interfere with ammo or takes up any usable space . No longer have to drop desiccant baggies…
A 38mm wide stackable spool shaped containers for storing desiccant with hydrometer insert. The circular spool can split apart into two halves, each holding approximately 0.36 Liters of desiccant. Can partially fill if full volume is not…
Fast‑Print 3D‑Printed Desiccant Box with Infill Ventilation Grid This 3D‑printed desiccant box is designed to efficiently hold moisture‑absorbing material while printing fast and using minimal filament . Instead of traditional perforated…
Here is my design for desiccant containers that fit the Bambu Lab AMS. I started with looking at how other folks approached this issue. In the end I decided to make my own version. This design requires zero supports and isn’t printed on a…
These holders allow you to mount desiccant packs in an out of the way location, so that you can keep your bed dry when sealed with a tonneau cover. My tonneau cover (RetraxPRO MX) is mostly water tight, but not quite. I figured some…
I wanted a large desiccant box to fit in my filament drawer, but there wasn't something that would just fit in the area I had, so I used this to get more experience with CAD. Inspired by another design I saw on Thangs , but I needed a…
Modification of Desiccant Container - Paper Storage Bag - Triangle tolarger dimensions from a request. Original design here: https://www.printables.com/model/38730-desiccant-container-paper-storage-bag-triangle Want to modify a design and…
Designed to fit funnels for ULTIMATE AMS Desiccant Containers Sets https://www.printables.com/model/909474-ultimate-ams-desiccant-containers-sets Gridfinity 2x2 bin that fits smaller funnel. I found that smaller one is just fine and I do…
Simple modification du modèle de Stanley (lui-même remix de l'excellent modèle de hexvolt ) afin de faciliter l'impression, sans support. Imprimé en PETG transparent pour visualiser la couleur des billes de silice. Print instructions: 4…
Desiccant Dryer in a spool shape and size in order to dry loose desiccant in an active dry box. In my case I am using the Sunlu S4. It also doubles as a desiccant holder to maintain low humidity when the dry box is not running. The big…
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
Description Created a set of ‘fins’ and baseplate with clamps to hold desiccant at the bottom of cereal box dryboxes. The idea is to have it lifted up to get close to the spool with separation between them to allow for better airflow.…
If you use any type of slotted container with desiccant beads to keep your filament dry, then you've surely had little bits and pieces of the desiccant fall out through the slits - especially after you've heated the beads to recharge…
please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
Desiccant Dry Box for Big W 3.8L Cereal Container. Sits under the spool. Hinge uses a piece of 1.75mm filament. I print using PETG, anything is probably fine though. Designed to print without supports. No screws or parts needed other than…
The Creality CFS desiccant setup leaves a whole lot to be desired. The packets that come with it are lame and single use. I tried making the desiccant holder that fits in those two slots, but in the end, only the top of the desiccant is…
Remix of PhilippSorenses's remix of PsychProd's original. I had the small issue, that my silica gel beads / pearls were uneven in size and sometimes broken. That led to a lot of them falling through the main container's wall. I slightly…
Large desiccant holder for use in a bulk spool storage box. The lid attaches with a strong detent, ensuring it remains secured. No risk of it falling over and spilling the desiccant. Gaps are 1 mm x 4 mm. Two versions, one with vertical…
This is a two-part, 3D-printable desiccant holder for insertion into the core of a filament spool. Parametric designs are available @ OnShape The lower section is a cylindrical basket with an outer diameter of 50 mm and 59mm height…
26Jan2026 Update: I received some feedback that the V3 larger volume holder was rubbing on the top edge. So I trimmed 3mm off of the back edge to provide more clearance, and I made the lid tabs smaller to reduce the potential for them to…
.4 nozzle .2 layer height. Tested with PLA and PETG. I tested it against the original version that doesn't have a locking tab and this version stays closed from a 4" drop whereas the original version without any tab spills open. V4 is a…
update 2026/06/08 - reordered the Holder and fixed the Spool bodies to work with latest versions and when set to spool_iw of 'w 63'. Using FreeCAD v 1.1.1 update 2026/02/08 - fixed clip ends on 60° model. Overview This is a basic…
A desiccant container that you can put on your filament rack. You can print with the grill or solid base.
Mid-size Rechargeable Desiccant Holder for Qidi Box Resized from the original Plus 4 version to fit the Qidi Q2 print bed (rotate 45°, then scale X to 75%). FR : Boîte à silicagel pour QidiBox — le modèle original pour la Plus 4 ne tient…
Since there are not a lot prinatbles for the Sunlu SP2 i've designed a desiccant box for it. The box ist fitting well on the bottom of the dryer. Just insert silica gel larger than 1,5mm in diameter. Just printed it with PETG on standard…
Fantasic silica gel vase conatiner by Tomek but I found the lid way too loose, since I mistakenly printed the walls of the main body at 0.2mm (which still works fine in pla+ since it's strong and flexi) all I did was resize it and now it…
I have created a drying container for desiccant aka. silica gel the size of common filament spools. The purpose is to dry the desiccant in a filament dryer or (heated) AMS-unit like Anycubics ACE Pro. The overall spool dimensions match…
I store my filament in a sealed container from Walmart i built this desiccant holder to fit at the bottom on either end in the space to round spools don't use The lids just friction fits and i put a lid on both ends just so it sits level…
This is a remix of Sam Wolfson’s Lid model for the Polymaker spool desiccant holder. The original design prints using Vase (Spiral) mode which makes the latching mechanism flexible. This model borrows the design languare of the original…
This is a desiccant tray that fits in the bottom of a 50 cal ammo can. I am using it to store my welding wire in a low moisture environment. This is a large model, measuring 11 inches in length and 5.5 inches wide. This model requires…
This is a filling aid designed for the excellent desiccant containers by Malolo: The funnel works with all container variants, but is especially useful for the Fullcore versions. An integrated cone inside the funnel protects the exposed…
I've got some filament in 100 liter tubs, and I wanted a bigger desiccant container to keep them dry. So I designed this canister. It has a bayonet-style twist-off top. I also made the funnel to make it easier to pour beads without…
The slots were reduced to 1.2mm so that smaller desiccant, including 3A molecular sieve can be used. This design is optimized for a 0.4mm nozzle. Use arachne slicing. I printed it in PC, but PETG, PCTG, HIPS, ABS, or ASA would be good…
I made the bottom and sides solid instead of vented. Used the original lid
Use petg or pla for best quality, enjoy!
General The original Filament Storage 2026 desiccant bin is designed to be assembled once and not come apart again. This works as long as (a) the option is available to dry the desiccant inside the bin, and (b) the part is printed from a…
Here's a desiccant holder that fits in any 12ga with 2.75 chamber. Good for long term storage. My friend thought of the idea and here is the end result! Don't put a bottom or top layer and the case head end and the opposing end of hull…
I've been using Sterilite 18L and 19L bins for spool storage, cheap and locally available and a manageable size. I adopted using alumina desiccant as my preferred humidity control, initially in cloth bags under RCNet's rack (…
Holds loose desiccant beads without letting them escape easy to print. PLA/PETG or ABS
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
Creality Dry Box 2.0 - Desiccant Drying Basket with Lid (Remix) Thank you, Immodal , for the original model, and for providing a STEP file to make editing easier! I always encourage everyone to provide a STEP file when they share their…
One large interior space to hold desiccant beads, threads together for a wide-range of spools (52 mm - 74mm center bore) no support needed. Small holes to fit small desiccant beads. Fits in my CFS and in my Filament dryer while in stalled…
Spacer for Desiccant Holder in vacuum seal bags KYZ does not have the desiccant holder I use listed anymore, but this one appears to have the same dimensions so it should work with it.…
Remixed lid base frame of the FS2025 Official Remix to achieve the following goals: Larger desiccant box Clear space under lid opening to use one of the many available cereal box caps instead of drilling a hole into the box itself It's…
Ce remix est inspiré du modèle Easy Access - AMS Desiccant Box - Super Remix dont il garde le renfort intérieur diminué afin d'avoir le choix de le remplir avec des sachets ou des billes, mais gagne un nouveau logo CNES afin de le mettre…
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
Dry a lot of desiccant (or just a bit) with this stackable basket system. Requires a Polydryer drybox and the Polydryer itself. All parts can be easily snapped together. Make sure the "i" of the tab is oriented towards the inside of the…
I don't have high-temperature materials like ASA, so I've opted to use metal desiccant holders like this one from Amazon: https://www.amazon.com/dp/B08VS3GF1R?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I can remove it from the adapter and dry…
These desiccant containers can be super-glued to the Polymaker's Drybox plugs. I call them "Desiccant Plugs". They are designed to be installed in the Drybox from the outside by rotating them as they go in. It's such a pain to pull…
I created this because the FlashForge printable tray has large holes that will not hold loose desiccant.
This was inspired by a DIY dry box design by Dan Designs on YouTube. In the design, Dan just put the desiccant in some little baggies that sat at the bottom. I didn't particularly like the idea of storing the desiccant that way, so I…
Use snug supports everywhere. 3mf for easy support removal
This Desiccant Pod is optimised for high-speed, low material printing on a filled build plate with zero supports! Print a batch -> Fill them with desiccant -> Use -> Empty desiccant to dry in oven -> Repeat! The print-in-place desiccant…
This is a re-engineering of a desiccant drier I saw on another site. I created this model in Fusion 360 The original model screwed at the centre, allowing the edges to flex and leak desiccant. I added threads to the outside cover edge for…
I developed this little tool to make it easier to measure out about 30cc of colour change silica gel beads. It gives me approximately (what I consider to be) the right amount for an organza bag to pack into a ziplock bag with a spool of…
I built this after printing some other models (thanks, authors!). I wanted to provide for more airflow, so I made a perforated panel and copied it around to all the sides. By comparing performance to some solid-sided boxes, I will be able…
update 02.12.2023: I changed the size of the holes in the bottle, so even smaler desicant can't leak A medium-sized desiccant container for about 50 grams, where you can easily change the desiccant. The box is intended for my Samla Ikea…
for https://www.printables.com/model/531312-desiccant-container-for-spool
This desiccant holder is designed to replace the stock desiccant that comes with the Bambu Lab AMS. It is refillable and can fit in the intended desiccant slot and the stock cover fits over it. I have included a 3mf file with the print…
Two desiccant containers are identical (not left- or right-specific parts) and hold about 3lbs of silica-gel combined. Taller roller brackets are required to free up space under the roller for the containers. Solid spots on the bottom…
Yet another Desiccant container The main reason for my decision to design a new desiccant container that can hold a digital humidity sensor, along with a specialized lid-sheet to protect the sensor, stemmed from the observation of several…
Remix for added ease, speed, and durability - model dimensions and assembly all are the same as the original. No supports needed. 2 options. This is my first remix, so support, downloads, makes, and shares are greatly appreciated!!
Bambu Lab AMS Desiccant Container _AirMax.2 (Does Not Fit In AMS 2 Pro) Maximizing the exposure of desiccant to AMS internal air, purposefully blends functional attributes with a dash of visual finesse, keeps the filaments dry, and…
HOLIDAY UPDATE (11.12.2024) Total redesign of the containers. Now you can choose between four grill patterns and two types of hygrometers. The files are distributed by folders. The previous designs have been moved in the "Old sets"…
Designed to fit in airtight boxes along with 4 1kg spools of filament (e.g. these boxes from Amazon ). Fill with 2mm+ desiccant/silica gel beads , then snap-on the lid. Total length is 255.4mm, height is 51.8mm. There are two versions of…
Meshtastic Carrier Board for RAK Wisblock in Small Box with Desiccant container. Options: Mount a double 18650 battery holder or a flat lid on the desiccant box. Printing: Print out of ASA or ABS to withstand heat. I like 4 or 5 wall…
Screw-Lid Desiccant Containers Desiccant containers with screw lids and lots of holes. They are designed to hold Dry & Dry silica gel beads (or any silica gel beads larger than about 2.5mm in diameter) and to be placed inside filament…
Mine was printed in PLA using a 0.6mm nozzle @ 0.25mm layer height No support is necessary. This would also print on a 0.4mm nozzle
My printer can't print the cover properly when printed vertically even after adding brim support. I don't want to print the cover horizontally by adding supports which is difficult to remove, So I make a 45 degree slanted version which…
If you're like me you have collected a big bag of desiccant packets. I have dried a few of them at a time in my Sunlu S1 drier, but wanted a basket, that fit in the drier, to hold a pile of them. This download has 2 baskets. A smaller one…
This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)
I made this remix to make the holder dry the desiccant efficently. With a better chance for airflow. No support needed.
240mm tall Corner box for silica gel desiccant to fit into a corner of a large filament storage box. I store a lot of PETG inside large storage boxes, and always lay them on the side. This results in some corner space, perfect for a…
SUNLU FilaDryer S4 Desiccant Holder with target of max volume for desiccant with a lid. The still cover fits, it's tested but i didn't take pictures.
This desiccant canister was designed to be used with a round cheap hygrometer. The hygrometer is pressure fitted directly in the spool core but leaves no room for anything else, the canister needs to be inserted from the other side. Since…
I printed an extra desiccant box and thought I'd put it on the bottom, so I decided to make thi cover.
I wanted to create a convenient desiccant holder for my KORKEN jars. Usually there's some residual moisture in the sugar, salt, or other things that I store in these jars. This desiccant holder helps in eliminating it. I put some silica…
Holes ar too big, use https://www.printables.com/model/1030192-sturdy-desiccant-cup-for-filament-dry-box-with-rol instead For best results, set the z-hop to 0. Had a lot of fun designing this in Fusion 360 :)
Model resized to exactely match the original. Thanks for pointing this out (Jeff Noxon) For best results, set the z-hop to 0, set seam position to nearest and use Arachne wall generator. Print time with my Sovol SV08 under 15min Also…
A compact and practical desiccant jar designed to fit inside filament spools, helping you maintain dry filament for better print quality. Each jar fits perfectly in the center of the spool hub and comes in two height options to match your…
spool sized container to fit into your AMS to keep filament dry and then pop directly into the filament dryer to recharge. Narrow enough that you can fit two of these in a single spool slot. If you plan to use this in your filament dryer…
This is a tray for drying desiccant beads in a food dehydrator. I use a Presto dehydrator. I cut the bottoms of most of the trays out for drying filament spools. This tray fits within the rings. Drying at 74° C for a few hours seems to…
This should fit into most filament containers, as its height is about the same as most filament rolls. There are two lids - one is closed, the other has a place for the popular hygrometers such as Aliexpress item 32936762466. I found the…
English This small drum is mainly used to hold desiccants such as silica gel. It is exactly the right size to fit into a filament roll of approx. 60 mm width, as used by Prusament, for example. If the filament spool is placed in a drying…
I primarily use filament from Prusament and Material4Print at home. The desiccant containers I’ve used so far usually didn’t fit well, making it impossible to store the spools in their original boxes. When I saw the model by kennyd1gital…
I wanted an easy way to dry out desiccant beads in my dehydrator. It has a funnel section to make it easier to pour the beads back into a container. It prints without supports.
This is just a quick remix. I raised the walls by 10mm, added chamfers to the bottom, and closed the gap at the back on the inside, as desiccant often gets stuck there. Prints well without Supports PETG recommended for drying
This is a funnel with a center-cap to block the air-flow channel on PealPrint's desiccant canister. Printed in PLA on my ender 3 with no brim, no supports. You may need one or both depending on your machine's bed adhesion & overhang…
I wanted to redesign my desiccant holder to have bigger threads and I ended up making a whole new one. I printed this using ZYLtech Matte Green ASA, a 0.4mm Diamondback nozzle, at 0.2mm layer height. The openings are 0.9mm wide.
Introduction Here's a model to mount a Zigbee humidity sensor into the PolyMaker's dry box, the PolyBox. Just like the included desiccant container, this model slots into the rear of the box (pictured). In the process of making this mod,…
I've got tons of desiccant that I've used which I need to dry and reuse. Don't want to use my kitchen oven as mixing business and pleasure is the last thing I want to do. So I just went to fusion and whipped up something simple. it has…
Remixed to work with 750g rolls from 3DXTech. Use the caps from the original model.
This is a simple tray/basket that fits inside a PolyMaker PolyDryer for drying out desiccant. It hangs snugly between the built in rollers. The holes are 2.5mm so the “standard” 3 - 5mm desiccant should work fine. Note that all the bulk…
I suggest using the gcode or 3mf over the STLs as there are many setting changed to achieve ventilation. This uses exposed infill for ventilation and faster print times than modeled holes. The STLs have no air holes modeled. 25 % gyoid…
Still new to 3D Printing so most likely don't have my printer fully dialed in yet. When I printed these Dessicant Spool Tumbler the threads were a little tight to start. These help work the threads in while saving your hands! Two tools,…
I liked and printed other models like: https://www.printables.com/model/106687-silica-gel-desiccant-containers But they don't fit my filament spools. So I spliced the lid from Michal's model into this one from chuyskywalker . I printed…
designed in 2 halves , everything can be printed on one bed if printing on kobra 3 with pla+ load my 3mf file and slice it, supports come off easy each half will hold ½ cup of silica gel beads, could be also just filled with desiccant…
