Bambu Lab Spool Desiccant Core
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desiccant container that fits perfectly into BL spools and doesn't fall out, due to its detents. Plus lid and funnel.
- Ocena
- 4,778 / 5
- Polubienia
- 262
- Pobrania
- 1624
- Wydruki
- 9
- Wyświetlenia
- 10 080
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Aite.
Didn't like the available desiccant pills I found, so I just made my own.
I suggest making them from PETG.
2 reasons:
1) they can stay in the spool when you dry filament at up to 70 C
2) they will be flexible enough so the detents don't snap off
Print orientation:
Basket: hole up
Lid: hole up
Funnel: funnel down, aka largest diameter on the bottom
No brims, no supports (as with everything I make)
Bambu lab spools are not symmetrical!!!
These are to be inserted from the side that has the material sticker on it from the factory.
Enjoy